4PCS SBA185366190 SBA185366060 Glow Plugs Set for New Holland Skid-Steer Loasder LX465 LX485 LX565 LX665 Ford Case Skid Steer Loader

✔Product Information:

Part Type: Glow Plug

Fuel Type: Diesel

Material: Metal

Item Condition: Aftermarket Part

Way of Use: Direct Replacement

Overall Length: 81.6mm

Heater Tip Length: 22.5mm

Stud Length: 45mm

Stud Size: M10 x 1.25mm

Part Number: SBA185366060, SBA185366092, SBA185366190, SBA185366080

Interchange Part Number: 1273118C1, 87542790, 72097517, 2401-8201-00, 5698-251-1978-0, 3280558M1, 15231-65512, 0-250-202-106, 0-250-202-007, 0-250-202-058, CH97, Y-701R, Y-107T, Y-107V, Y-172, Y-701RS, Y-701U, Y-107R, HDS272, HDS241

WarrantyPeriod: 6 months. If there is any problem during this period, repair or replacement service will be provided.

Package Include: 3pcs Glow Plugs

▶Application:

for Allis Chalmers Tractor(s): 5020, 5030, 6140

for Bobcat Loader(s): 843

for Bolens Tractor(s): G192, G194

for Case Skid Steer Loader(s): 410, 420 (s/n N7M466710-earlier), 420CT (s/n N7M45501-earlier)

for Case IH Tractor(s): D25, D29, D33, D35, D40, D45, DX18E, DX21, DX24E, DX25, DX29, DX31, DX33, DX34, DX35, DX40, DX45, DX48, DX55, DX60, Farmall 31, Farmall 35, Farmall 40, Farmall 45, Farmall 50, Farmall 55, Farmall 60, 235, 245, 255, 265, 275

for Ford Tractor(s): 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1510, 1520, 1620, 1710, 1715, 1720, 1910, 2110, 3415

for Ford Skid Steer Loader(s): CL25, CL35, CL45, CL55, CL65

for Ford Lawn & Garden(s): LGT14D (9/30/87-earlier), LGT16D (9/30/87-earlier)

for Gehl Skid Steer Loader(s): SL5620, SL5625, 5620, 5625

for Hinomoto Tractor(s): E16, E18, E23, E25

for International Tractor(s): 244, 254

for Iseki Tractor(s): TS1610, TS1700, TS1910, TS2000, TS2205

for Kubota Tractor(s): B6000

for Massey Ferguson Tractor(s): 205, 210, 220, 1040

for New Holland Tractor(s): T1510, T1520, T2210, T2220, T2310, T2320, T2330, T2410, T2420, TC18, TC21, TC21D, TC21DA, TC25, TC25D, TC27D, TC29, TC29D, TC29DA, TC30, TC31DA, TC33, TC33D, TC34DA, TC35, TC35A, TC35D, TC35DA, TC40, TC40A, TC40DA, TC45, TC45A, TC45D, TC45DA, TC48DA, TC55DA, TT45A, TT50A, TZ18DA, TZ24DA, 1530, 1630, 1725, 1925, 2030, 2035, 3040, 3045, 3050, 4055, 4060

for New Holland Skid Steer Loader(s): C175 (s/n N7M466429-earlier), L125, L140, L150, L160 (s/n N7M448360-earlier), L170 (s/n N7M456357-earlier), L175 (1 speed s/n N7M470572-earlier & 2 speed s/n N7M470553-earlier), L255, L465, L565, LS125, LS140, LS150, LS160, LS170, LX465, LX485, LX565, LX665

for New Holland Lawn & Garden(s): MC35

for Shibaura Tractor(s): SD1540, SD4003, SD4043, SD4603, SD4643, SP1500, SP1540

★Feature:

Safe start-up from low ambient temperatures

Low emissions during warm-up phase

Stable idling running before engine reaches operating temperature

High-quality coating on shell for high resistance to corrosion

Unique shell design for excellent heat transfer

Perfect gas-tight sealing

High shear torque

High resistance to deformation and security of the heating coils

▶What are the symptoms of a bad glow plug?

The most common symptoms of a bad glow plug are engine misfiring, hard starting, black or white exhaust smoke, decreased fuel efficiency and rough idling.

▶Disassembly and installation:

When a glow plug needs to be replaced, it is recommended to apply a synthetic engine oil around each glow plug and ideally let it penetrate for at least a week.

This reduces the risk of shearing and makes removal easier.

When removing, each glow plug should be manually disconnected from its electrical wire. When this is complete, each plug can be individually uninstalled with a suitable torque wrench.

Once an old glow plug is removed, a glow plug hole reamer loaded with silicone-free grease should be used to clean and empty each hole of carbon deposits.

After that, the new glow plugs can be manually installed into their seats and then tightened with a correctly set torque wrench.

☎Attention:

Reliability - The parts are excellent and fast after-sales service.

Parts Updates - According to the original factory specifications manufactured, tested.

CustomerFirst – We committed to provid you good buying experience.

Terms of Sales - The amount we charged only covers the product, shipping and handling. Any custom or import tax is Buyer's responsibility.