Your cart is empty.
Your cart is empty.
The pull rod are compatible with Hyper Go MJX 16207 16208 16209 16210 H16BM H16GT H16DR 1/16 RC Car
The steering servo link linkages made of metal material,CNC machined for precision.
Upgrade parts, easy to install,great strength.
Help to improve the overall performance of the RC car,flexible and sturdy.
Good upgrade part,makes your RC model even more cool.
Great strength,easy to install and upgrade.
Material:Metal
Adjustable Length:Overall (Min-Max) Approx. 46.5mm-56mm;
Center of each hole (Min-Max) Approx. 40mm-51mm
Hole Inner Diameter: 2.5mm
Color:Blue/Black/Red(Optional)
Weight: 20g/4Pcs
Package includes:
4 x Metal Steering Pull Rods
troy
2025-09-05 13:21:08
Works as they should. I would recommend some locktite to be used on these as they do come loose even when tightened as tight as I dared without stripping threads.
Chef
2025-08-04 19:18:09
Not bad quality they work they do what they're supposed to no issues.
iRambes
2025-05-17 10:27:45
I have a couple MJX/HyperGo cars and the steering was always loose. Also the turnbuckles would break with heavy impact. I found these and they tightened up the steering tremendously and are way more durable. They are kind of a pain to set up since they are so small, but if you can measure and use measurements to set them up, it’s way easier. You also need to tighten them well, or like other reviewers have stated, they will come loose. I have been bashing with mine for hours on end and none of the 3 installed links has loosened.
biglarrr
2025-04-14 17:50:58
Sloppy fit and hard to adjust. The swivel mounts have nearly a mm of play and I suspect they will fall apart within amonth. I thought about greasing them but that would probably just pick up dirt and wear them out faster.Update: I ran two batteries, on a small oval course and checked the steering, and the wobble is worse. I'm going to cut the original plastic connectors, and drill them out and try to thread them on the turnbuckle.This is the worst "so called upgrade" product i've ever purchased.
timmy
2025-04-10 15:59:43
you will need to super glue them to set the length or somethign because they will fall out on you
KAiNE333
2025-04-09 18:15:31
Having the ability to adjust your toe in... or toe out with these 1:16 scale brushless cars is so handy and after you get your length right be sure and tightenthem very well or it will adjust itself while you are driving!I'm sure these will work on many RC's as they were made for a 1:10 and are exactly perfect length for the 1:16 JJRC you just have to use the stainless round piece that the screw goes through and set your wheel alignment to personal liking ðŸ‘ðŸ½
Joe
2024-12-30 18:36:12
These are sloppier and than the original worn out plastic parts
James
2024-12-26 16:21:53
Good quality
Recommended Products
