Your cart is empty.
Your cart is empty.Product Description
- JINGCHENGMEI's professional team design products to meet your standard 19-inch equipments according to EIA/ECA-310-E.
- Besides product's quality, reliability and compatibility, we are striving to optimize product structure and packaging to make product transportation easier and safer!
Product Features
Saving Space
Wall-mounted racks provide a versatile storage solution that allows various network devices to be installed vertically to save space.
Pre-assembled & Easy Installation
Products are assembled when delivery and only need 4 steps to be mounted onto wall.
Folding Packaging
Folding packaging makes volume reduction by 80%. Easy to carry , More Economic .
Wall Installation Vertically
Under Desk Installation Horizontally
You can also install the bracket under the table for horizontal installation, so that you can easily and directly access the installed equipment, which is very suitable for SoHo (small office, home office) environment, and can be used for environments that lack full-size server equipment rack space Provides space-saving installation.
Vertical and Horizontal Mounting
Wall Installation Vertically
The bracket mounting hole is convenient for installation on the bottom side of a wall or table, and is suitable for installation on almost any wall/ceiling surface. The location of the mounting hole is convenient for later maintenance and relocation.
- Made of High quality cold rolled steel with Powder coating finish
- Including full set of M6 Screws and cage nuts
Christopher R. Davis
2025-08-29 15:22:16
I bought this to use with a rack mounted PDU for under my desk. It was easy to install, seems really sturdy, and ended up being a great way for me to hide the chords under my desk. It comes in a single piece that unfolds to install so there’s no measuring or complication to get it installed. It’s intended as a vertical rack mount, so they include a level to help make sure it properly mounted on the wall. Overall I’m pretty happy with it and would recommend it if you think this would be useful for your setup
Mr Person
2025-08-27 13:13:52
Works fine. Mounted it to a 2x6 in my basement for a switch. Will possibly add a UPS so I got the 6U version. Only complaint is that the measurements are mostly in MM not inches. I ended up just holding it in place and marking where to put the screws and it worked fine.
Blake C.
2025-08-23 13:11:56
I needed to mount a 1U amplifier under my new height-adjustable desk, and this rack worked perfectly. It included all the hardware needed, including wood screws, cage nuts, and rack screws. The rack is lightweight yet sturdy and was simple enough to install. Plus it was a couple of bucks cheaper than the "name brand" option.
fangleman
2025-08-11 16:00:18
Sturdy enough for the switches I mounted, and a good value at the price I payed.
Jay NJIT Engineer
2025-08-05 15:48:30
Very easy to install , Very Practical , I used them for an intercom system to be place on a hallway , It works very wells , very easy , order the 4U version so you can space to run the wire over the top
brandon jacques
2025-07-08 19:10:03
Exactly as described! Fast shipper
Leeroy Jenkins
2025-06-25 16:19:48
Great rack for my little home network setup! A great addition to clean up my “network closetâ€. Fits standard 19†gear with no trouble at all! I was a little worried that this was going to be flimsy, but I was very wrong. I actually mounted this a little differently than what was intended (technically it is upside down), but it works better than I could have hoped for! The included hardware was a little disappointing (the mounting screws feel a little cheap and there is only 1 set of cage nuts and screws included), but it’s really not that big of a deal. I’d buy this again without hesitation!
Zyla
2025-06-20 11:17:03
Bought the 1U version. Bolted this to the side of one of them wire racks to hang my switch upright. Works very nicely.
Aska
2025-06-02 16:05:07
Just what i need
Patrick Watters
2025-04-01 16:56:03
My 19 inch rack mounted power conditioner did not fit this mount. It was about an 1/8 of and inch too short. I had to use a screw driver to pry and bend it to fit. Normally i would have sent it back, but it was a secondary supplier from the US and i didn’t have time to deal with return shipping, refund discussions and ordering from elsewhere.Live and learn. I wouldn’t recommend
Kaiketsu
2025-03-24 16:29:04
It’s sturdy and well-built, offering solid support for my rack-mounted server. The vertical design is a great space-saver, allowing me to optimize room while keeping everything organized. Installation was straightforward, and the included hardware made mounting it to the wall hassle-free. The bracket holds the server securely, and I’ve had no issues with wobbling or instability. The only downside is that it doesn’t come with cable management options, so that requires a bit of extra planning. Overall, it’s a dependable, space-saving solution for anyone needing a wall-mount rack. Would recommend for anyone with a small server setup!
Kunde
2025-03-10 21:23:49
The media could not be loaded.
Jason
2024-12-30 13:39:21
It's strong enough for its size, i have a fairly heavy router and switch in it (cisco 2911 and 3750) as well as a patch panel and PDU without issue.It came with a bunch of rack nuts and screws, and not the cheap crappy ones the good kind (m6 with the sleeves and plastic washers)Enough for me to mount everything i needed and have extras left over.
Recommended Products
$189.99
$ 76 .99 $76.99