Your cart is empty.
Your cart is empty. (5 Pack) Press Fit Drill Guide Bushings 0.159" ID x 0.375" OD x 0.375" Length, Made of Steel
DIMENSIONS;
INNER DIAMETER: 0.159 inch (4.04mm)
OUTTER DIAMETER: 0.375 inch (9.53mm)
FLANGED OUTTER DIAMETER: 0.472 inch (12 mm)
FLANGE LENGTH: 0.060 inch (1.52mm) LENGTH WITHOUT FLANGE: 0.375 inch (9.53mm)
TOTAL LENGTH: 0.435 inch (11.05mm)
Material: Steel
Color: Silver
Customer Satisfaction is our top priority, if you're not satisfied with this product for any reason, you may return it and get a full refund for your item. In addition, we will try our best to answer any questions our customers may have.
Package Content: 5 Pack 0.159" ID Drill Bushings
Beto
May 24, 2025
I used these for a drilling template and used it many times with no failure and no wear. I trust this template drill guides will outlive me.
Nate
February 28, 2025
Great flanged drill bushings for precise hold locations with drilling fixtures.
Dave Schaack
February 20, 2025
A simple part. Internal and external diameters are accurate, to the extent I can tell. My 1/4 inch drill bit fit nicely inside with no slop. My dial caliper reads 0.375 on the OD.The main thing that I can add is that they are hard, as they should be. My 65 HRC file scratches the big end, but my 60 HRC file does not.
Recommended Products
