Your cart is empty.
Your cart is empty.Product Description
5 ton heat press machine
The 5 ton hydraulic hot press is not only robust in construction, but also compact and portable in design, so that our machines do not take up excess space. The double heating plate is evenly heated, and the LCD temperature control meter is simple to operate, bringing you a simple and convenient experience.
The temperature of this hot press is set at 180℃. Timer set to 3 seconds. You press the timer, there's a buzz in three seconds. If the temperature set by the factory can meet your temperature requirements, simply insert the plug, turn on the switch, let the machine warm up, and then use it directly. If you need to change the temperature and time, you can modify it according to the user manual, which is very simple. When using hydraulic jack, remember to tighten the safety valve, product size :325 × 25cm, product weight :18kg / 40lb: 110v. Machine power :900w. Hot press table size :6 cm x 12 cm (2.4 inches x 4.7 inches). Packing list: hot-press ✖1, power cable ✖1, Product manual ✖1
Michael Impastato
2025-09-04 16:26:04
This machine is fantastic! Whether you are a beginner or an expert, this heat press is a real winner. I have been very pleased with it. Setup was easy and the machine is very user friendly. Let me tell you, I am totally in love with how well it works! The results are nothing short of amazing. The quality amazes me. The temperature control is easy to use. It took care of it with ease. No problems at all. Value for money. Heats evenly. I am very happy with my purchase and this machine has basically paid for itself! Best investment ever!
L
2025-08-15 15:20:51
Do not buy this item it is a waste of time and money. It will only result in you burning your stuff. The temperature is wildly inaccurate ranging from 60 to 80° off on both units on one unit. It kept increasing the temperature despite me setting it to be at 180. It went all the way up to 350. I don’t know if there are any other machines on Amazon that are actually worthwhile. They all seem to be kind of the same thing. But I did buy a new DIFFERENT machine if it works I will update this review so you know if the new one I just bought is any good.
Walter R. Hudson
2025-07-29 11:18:14
This is a nice heat press for the cost, and does a decent job. About the only way to improve it is to have a temp sensor in both heat blocks, as there is only a sensor in one of the blocks. If I were to purchase another one, I would make sure both blocks have a sensor. Still, it's a decent one considering..
:)
2025-07-26 10:09:00
This is super ideal for personal usage. I messed up like the first few and burnt the crap out of it. I love it once I went through some mess ups. I seen an improvement on each run. Now I have found the sweet spot I hit between 10-19 percent is my highest. The only reason why I didn’t give five stars is when you go to press super hard to push it all out it wobbles and is awkward to hold. For the price nothing beats it. My friends have thousands of dollars this is 220 worth the money at least to learn and such. Idk this I felt needed to be shared about the product only have had it 3 weeks use it daily! Love it
David
2025-07-02 10:49:05
The press itself is decent for the money.Easy to upgrade to a better bottle jack.I did buy a used machine but it came with rosin on the sides of the heat plates left from the last user.Other wise not a bad product at all just be smart and don’t leave it on unattended
Ken P.
2025-06-20 09:34:51
It came in a smashed-up box that was covered in return labels from previous customers. At least put it in a new box. Screws missing and some in the bottom of the box. The thing hardly worked when I tried it. Poor results and a very small yield for the effort. Junk. I returned it.
Carl R
2025-03-17 20:34:07
I could tell this was built to last just from the moment I opened the box , it feels like a high quality steel and robust, I found the double heat plates ensure even pressure and temperature distribution which in my opinion this is crucial for achieving a consistent result, the insulation plates that this has is a thoughtful addition it keeps the exterior cool while the press does all the job, I also enjoyed to use the screen this allows me to set and monitor the temperature without any problem and I love that I can switch to fahrenheit since I don't really like celsius.
kylan
2025-02-28 18:16:07
i love this press it works great got quality product for my personal use
Eric Wood
2025-01-17 12:14:20
Easy to use and understand
Mann
2025-01-05 18:36:48
Look at the picture a buyer left on there review its burnt rosin clearly the people that left a good review has no idea how a buget press or quality one works.Prove me wrong send your updated review with some honey looking roslin.Wouldnt even wast trim on it also its not 5 tones the jack is the size of a can of pop. 1/2 or 1/4 ton from China. USA/CA start at 1 ton upBottom burner slides out REDHOT! GOT FIRST DEGREE BURN IT CAME OUT PARCHMENT WAS IN FLAMES LOST 3 1/2 GMy buddy took a pipe wrench to it only thing handy then shipping it back burnt talking to lawyer.
Recommended Products