Your cart is empty.
Your cart is empty. Feature:
Power: 50W
Voltage: AC90V-150V(No need power supply)
Color Rendering Index: Ra70, PF: > 0.93
Color Temperature:
Beam angle: 120 degree
Lifespan: 10,000hrs
Housing material: Aluminum
Luminous Flux: 100lm/W
NO need power supply, contact 110V AC directly, for DIY
How to use:
1. no soldering needed, connect wires to the L N point.
2. paste the thermal silicone grease to the back of LEDs.
3. install the LEDs to the heatsink or your floodlight.
4. connect to AC110V, start working.
Applications:
Widely used in Traffic lighting, Landscape lighting, advertising lighting, Indoor Lighting, Special lighting,Landscape scene / spot lighting,Architectural lighting,Display scene,Artwork lighting,general lighting,Amusement park scene,Aquarium lighting and so.
Package Content:
1 pcs * Led Chip
lightman
2025-06-27 18:57:41
Easy to mount to the heatsink and the push in terminals made it easy to wire. I used these led chips, (3 of them),1 blue chip, 1 red chip, and 1 green chip along with a DMX512 demodulator unit to control the different colorsinside a par 64 light can that once used a 500 watt bulb. will definitely be buying more of these.
Cliente Kindle
2025-05-17 17:51:11
Buena iluminación, para sustituir el Led de una lámpara
Richard M.
2025-04-05 10:36:07
I purchased this to replace a lamp in a spotlight. Even though I throughly coated the back with conductive glue (made for exactly this purpose) it died after a week.
Tiffanie Trueblood
2025-03-24 20:24:32
Great amount of light. Does put a lot of heat off. Pair with a good heat sink and the heat goes away. I was shipped a 220v instead of the 120v but the instantly fixed the issue and resent the correct voltage. So far a great product
A. Aslam
2025-02-11 15:17:14
Good amount of light but does not seem to be 50 watt. Definitely needs a big heat sink, gets hot fast.
Recommended Products
$28.99
$ 12 .99 $12.99