Your cart is empty.
Your cart is empty.Product Description
LED Ceiling Fan Light Retrofit Kit & LED Ceiling Light Retrofit Kit
Step 1
Ensure the power supply is off before handling the light or starting the installation process. Follow all local electrical safety regulations.
Step 2
Locate the color temperature switch on the LED Panel .Choose the color temperature that best suits your space and preferences.
Step 3
Make sure all connections are secure and properly insulated. Double-check that the power is still off before reconnecting any electrical wires.
Step 4
Once the installation is complete and all safety checks have been conducted, turn on the power supply.
Novistorian
2025-08-20 10:25:20
This is an easy install, once the power is off :) Great light, and I'm looking forward to not replacing a bulb every 3 months. This will save a ton of money!
Consumer
2025-08-18 12:55:26
Review for 6.3" LED Ceiling Fan Light Retrofit Kit, 22W, 2800LM, Ceiling Light Replacement Panel PCB, 5CCT Switch 3000K 3500K 4000K 5000K 6000K, 120V, ETL, CRI90, Dimmable (22, Watts).First, I really liked this retrofit kit. I have a 14" wide office light that was burnt out. It was part of 12 lights that you could see in the long room. I could only find 12" replacement lights (at $30 each). Then I found this product. It allowed me to replace the LED light inside my existing light. Thus, all 12 of my office light fixtures still match, as I was able to keep the light base and cover. I only replaced the interior LED light panel.I will definitely order this retrofit kit again.Tip: Make sure that your light base is at least 6-1/2" across for this light to fit. Also, if you are trying to match the light color/brightness with another fixture in the same room, check the wattage of your old light to make sure that this light has a similar wattage.The light does have magnets on the back. (The product description should emphasize this. The info gets lost, as it is only found as an answer to a question.)My light had a metal base, so this light kit stuck to the metal base, making it super easy to install (and no screws needed). I only had to remove the old LED light board (which was connected by 4 small screws), connect the wires to the new light kit, choose the light color to match my other light fixtures, and then stick the light kit to the metal base.The end result was a light that perfectly matched my other office light fixtures. And it was all accomplished with less trouble than replacing the whole faulty light fixture.Now for the reason for 1 star deduction. The warranty information on this product's listing is a mis-match. In the product description, the warranty is listed as being 5 years. Under "User Guide" (further down the page, where you have to expand out that section), the warranty is listed as being 3 years. Customers rely on correct product information.This is a 5 star product, other than the product description being a bit off (not mentioning the magnetic back and the warranty length confusion).I really hated to deduct that star, as I found the product easy to use, it was a better solution than replacing the old light fixture, and I liked the ability to choose my light color (3000k, 3500k, 4000k, 5000k, or 6000k). Customers rely on accurate product photos and descriptions, and I do deduct stars depending on how much of a mis-match the product is with the product description/photos.As long as this product performs well over the long term, I do plan on purchasing more when the other lights begin to go out.(Also, I will update this review **if** the light kit doesn't last as long as it should.)
M. Wolfe
2025-07-06 15:56:55
I ordered this for a mini fan in my son's room that had a light that was just over 5" across. This one worked, but I had to get creative with the wiring and mounting to make room for the glass that seats over the metal pins. It took a number of disassemblies and adjusting, but I ended up finding that I could run the wires through the center hole to keep the light flush with the frame which gave me the clearance for the glass cover. The different color temps are a nice feature, but we just keep ours at 3500K. It seems like a big jump from the 3000, but our son likes it the best.It came with everything needed and was simple enough to wire after figuring out all the mounting issues. It's nice and bright compared to the tiny 6-watt LED we had before this. It was a worthwhile upgrade and I'd definitely recommend it!
Boating family
2025-06-12 19:43:38
Never knew these light replacements existed until we had to replace light bulbs in our son’s ceiling fan and noticed it didn’t have light bulbs but this weird panel led light. Found this online and it fit and his room is nice and bright now. Shipped very quickly and super easy to install. Highly recommend
Erwin Fletcher
2025-05-05 13:30:09
you can pre select with a switch the color temp that you like from 3K up to 6K.... If you're one of those weirdos that likes a blue white light...
W3ap0n-X
2025-04-27 20:12:14
I greatly dislike the "memory" function of the modern ceiling fans. Always changing temperature when I just need to be in and out of a room quickly. This switch keeps the light on the temperature I want at all times and it's quick and easy to install. The magnetic little feet are AWESOME. All that was needed was to pop off the connector and use my own lever clips to get the light connected, let the little magnetic feet do their job, and put the cover back on. I am going to be buying more of these to convert all of my fans.
Edwin S.
2025-04-11 14:44:59
This was perfect for our ceiling fan. The old unit required cycling the power switch to change color temperature. This one has a simple switch to permanently select the color temperature, and works much better in my opinion. Installation was very easy, and the unit fit perfectly. It is bright and looks good. Overall a good value!
AvgJoe
2025-02-20 14:10:51
Be careful if you buy one of these - it's HUGE. I haven't installed in the intended fan yet, but I'm seriously wondering if it will fit. The light output is consistent with the 22W rating and the selection range of color temperatures is above average. Note that the color range does NOT include 2700K, so look elsewhere if you want the "bedroom lamp" color.I found the actual color rendering to be a bit dull when compared to other replacement discs I've recently acquired. Struggling a bit to believe it's actually a 90+ CRI. More like an 80+.
Recommended Products