Your cart is empty.
Your cart is empty.Product Description
A bushing, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length and a clenched bearing is similar to a split bushing but with a clench across the cut. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD.
From the Manufacturer
A bushing, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench across the cut. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD.
DMK
2025-07-30 10:05:30
I had a bunch of loose router bits to corral, so I picked these up and drilled some holes in a scrap piece of Ash. Stuffed these bushings in and they worked great for that. The OD on the upper part was .520", too big to recess with a 0.5-inch bit, so I just let the flanges sit on top the block. My Forstner set doesn't go up by 32nds. 5/8" was too big. They fit snugly into a 5/16" hole. Router bits with 1/4-inch shanks also fit nicely, not too tight.
Davida
2025-06-26 10:47:59
I used it as a bushing. Worked great
Rudder
2025-06-02 13:36:07
I like the quality I like the pricing on these I normally use brass, but these are pretty nice. Can’t beat it for the price and are working just fine.
Shirley SIG
2025-04-23 16:26:07
They were exactly as we had expected. Perfect for our needs. Arrived quickly and appropriately packaged.
Customer
2025-03-17 13:59:29
Apparently good quality.
aksman
2025-02-15 17:11:14
These are a great price and I will use them as bolt bushings.
jacques976
2025-02-05 17:40:17
if you go to the company web site they show you and assortment that they make and it has all the dimensions that you can make a choice. the web is missing this advice in the ad .
Recommended Products
