Your cart is empty.
Your cart is empty.Product Description
These Hose Clamps are reliable and easy to install. They have higher ductility, impact strength and wear resistance for a given hardness. Maintains constant tension to prevent leaks when hoses expand and contract during thermal cycling.
From the Manufacturer
These Hose Clamps are reliable and easy to install. They have higher ductility, impact strength and wear resistance for a given hardness. Maintains constant tension to prevent leaks when hoses expand and contract during thermal cycling.
Jacki
2025-09-04 16:24:34
These are NOT the cheap clamps that you buy at Autozone. These things are legit and better than screw on type, bc they never let up. I used 2 boxes of these to do a trunk tank cooler for a supercharged car and not a single one has leaked. These are the best ones around.
DIYGuy
2025-08-31 13:09:14
These are superior clamps in that they provide constant tension.I have had a radiator hose come off on the highway with the worm gear type of clamp.They do NOT provide constant tension, which is important as the hoses age and compress under the pressure of the clamp.I am replacing corroded clamps and the worm gear types on my vehicles with these.
California Reader
2025-08-01 18:59:12
I was barely able to install this clamp onto the bottom T fitting. The clamp is opened up quite a bit at this point. Maybe that's normal. The clamp below, which I still can't find online for this larger size needed, fits great. I could not get this clamp to fit in that location as the fitting in the block has a nice bulb to it that you need to open the clamp up to get over. The bottom clamp is fitting onto the 3/4" hose right into an LS1 block out of a 98 Trans Am. I gave up trying ton install this onto the other fitting, ended up putting an old worm gear clamp onto it. I'd return these, but it was such a hassle to install, getting it off is not something I'm interest in doing. Maybe this would be good for 5/8" hose, but I already have clamps for it.Quality of the material is good, these just aren't working out for me.
Danny
2025-07-30 13:53:01
did not fit items are no as described got black lil flimsy 1s they look bronze and sturdy in this picture but they are not when i received them
Lucy Lopez Rios
2025-05-02 18:16:42
The ones received were good Strong quality. Will order again but different sizes. As good as original.
Moniqua
2025-04-16 10:28:25
I was looking for a spring clamp with a 1" closed inside diameter. These are 7/8" diameter closed, making it very difficult to get on the PCV hose I was trying to clamp.
Customer
2025-02-24 10:38:19
These are high quality. After the first expansion, you can tell a cheapie will not hold or keep the size you wanted. Just take one and expand it and let it go. The Hillman will come back more and repeatedly. For your car, your peace of mind on the road, use a good one on that hose or pipe.
Erik Johnson
2025-01-14 16:31:33
Worked great to clamp a cloth onto a 1" pole.
Recommended Products