Your cart is empty.
Your cart is empty.Product Description
Q: When first used, if the propane regulator does not work, and Gas is not passing through the hose, how to do it?
A: The hose regulator is equipped with an over-current protection setting. When the gas is too large, it will close, so that the gas cannot pass through the hose, thus protecting your safety. Please turn off the propane gas tank and disconnect the propane regulator from the tank and wait for about 30 seconds. Then reconnect the regulator and open the tank valve slowly.
Kenneth
2025-08-23 14:48:17
Affordable, nice braided steel, and no leaks. Big upgrade compared to my old regulator that couldn’t cook a fly. Works great for my purpose, and haven’t had any issues. Sure the plastic dial is cheap, but this is not, at the time of this review, all that expensive at all.
Kingkongmegatron
2025-07-19 17:51:58
This is a great addition to my propane fire pit, but ended up returning it due to lengthy shipping. By the time it had arrived, I already had an ultimate solution in place. Still, would purchase again if needed.
Robert clayton
2025-07-09 21:41:19
Works as it should. Used for propane tank to be used for home supplemental heating.
Lee
2025-06-06 17:00:06
It’s just what my husband needed for his project!
J Wells
2025-05-02 15:19:32
Bought for my daughter to run a glass sculpturing torch. Usually run a much bigger regulator. She wanted to run a portable operation for remote demos. Surprised that it even runs my Bethlehem water cooled bench burner. Over 110 jets need a lot of gas. If it will adjust enough to run my Bethlehem and Carlisle torches it will do most anything. We generally run the torch propane pressure at 7-8 psi for our glass torches and it doesn't frost up the valve at the tank. I doubt it would have the capacity and flow rate to run a glory hole for glass work though. Very confidence building appearance with the stainless braided hose. Bought 12' long to keep LPG bottle a long distance from the flames. I can honestly say I believe you will be impressed. I sure am.
Daniel P
2025-03-22 16:13:29
The product looks and feels amazing. I’m having some trouble with the high PSI output to a 200K btu stove, keeps tripping the safety which requires work to restart. I think the trick is to slowly turn on the gas with the secondary nozzle slightly open and increase PSI at the tank until hearing gas from the burner, then light (watch your eyebrows) and POOF. Day one, worked well, day 2 couldn’t get to work at all, day 3 tried the above and it worked. Crossing fingers day 4 will work the same way.
Philip Anderson
2025-03-11 15:03:52
I had to replace this hose twice for my forced air Mr. Heater propane heater. I turned on the line and opened the valve and the line starts leaking propane after only a few uses. This has happened 3 times now. If a hose can’t handle the rates PSI listed on the package (0-30 psi) then please don’t sell it.
JHardin
2025-02-14 18:29:01
The hose and couplings are top notch but the regulator is way too sensitive to adjust. The slightest touch and you add five pounds. Most heaters and griddles run on two pounds. It’s almost impossible to get just two pounds of pressure from this outfit
Recommended Products