Your cart is empty.
Your cart is empty. About Moicstiy
Moicstiy is a comprehensive brand, especially in hardware has excellent expertise and manufacturing process, worthy of your trust, welcome your purchase, we will be happy to serve you!
Specification
Color: Silver
Material: Copper & Iron & Plastic
Pressure: 20N
Load Bearing: 2-3kg
Extendable length: 0-55mm
Total Length: 185mm/ 7.3inch
Package Includes
2Pcs x 6Inch 20N Gas Struts (with Mounting Hardwares)
Warm Tips
1. Manual measurement, please allow a reasonable range of error.
2. The installation diagram attached to the product is not the corresponding size, please do not misunderstand.
90 Days Worry-Free After-Sales Service
Making you satisfied is our greatest motivation. To provide you with 100% service is our purpose.
If you have any quality problems after you receive the goods, please contact us within 24 hours and we will give you an answer as soon as possible!
Jeffrey Oetting
2025-08-17 12:16:01
Durable little strut
Frank B.
2025-06-24 13:26:33
This may take some trial and error. Overhead flip up cabinet doors. Used two on larger doors, one on smaller doors over bed. To install, slide out the metal retainer clip on both ends of strut so you can easily check door open/close fit. It's a bit of a struggle with a screwdriver. Mount upper adjustable bracket first about 1 1/4" in from edge of door and 2 1/4" from "hinge end" top of door), with the bracket toward center of door. Note, must check clearance when door is closed, yours might be different than mine. Install gas strut onto the upper ball (need to hold it on the ball), and push the door open. I held it open with my head, you may need a helper. The 6" are not long enough to go more than 90 degrees, which worked fine for me (would need more stroke). Then install and hold the round lower ball onto the gas strut and align bracket inside door frame and mark a hole with a pencil, keeping the round base tangent to outside of cabinet frame. Remove strut and install screws. Reinstall strut and check open height and that door closes, watching the strut compress as it closes. Should have about 1/4" rod exposed just as door closes (don't want it to bottom out). The door may close on its own with only one strut attached. If need be, adjust upper bracket or move lower bracket and try again. Once satisfied open and close works properly, push the metal clips back into correct position in strut and install strut permanently onto ball brackets, rod down. Pretty hard press and snap. Measure and take notes of screw placement to make other installation go easier. Repeat for other side if necessary. Good luck!
Eric H.
2025-06-14 17:55:20
Bought these for a toy box project for my son. Just wanted to slow down the kid and adjust to maybe hold it up. Not a lot of weight. Nope now I have to find another set that works to come to finish.
Kyle Gerhart
2025-06-11 15:18:21
Works perfect for custom camper cabinets. Ordered 2 sets, one shock was bad (leaky). Amazon sent a replacement ASAP.
Sandi b.
2025-05-07 10:16:26
But nice build to them I’ll use them for something
James
2025-04-14 11:04:27
Put them on work schedule I recommend the guy
cindy
2025-02-14 15:01:29
They work great
Bhutch
2025-01-20 17:21:21
The lid these hold are holding only weighs 13 oz. They’ll hold it in the up position but once it breaks the 90 degree plane, they don’t offer support or even any resistance to keep it from slamming.
Recommended Products
$22.95
$ 10 .99 $10.99