Your cart is empty.
Your cart is empty.Product Description
Description:
Diameter: 6 inch (Blade to Blade)
Color: Black,
Voltage: DC 12V,
Watts: 80W,
Maximum Fan RPM: 2250RPM
Maximum Fan CFM: 650 CFM
Number of Blades: 10 (Straight)
Installation:
Step 1: Open the hood of the car and remove the intake pipe above the cooling fan, so that the cooling fan can be removed smoothly.
Step 2: The cooling fan and the air conditioning fan are located above the fan frame, with a total of four corners, one screw at each corner. Use a professional tool to unscrew the four screws. When the screws are all unscrewed, we can remove the cooling fan from the car.
Step 3: Install the new cooling fan correctly on the new fan frame, and tighten and secure the four screws at the four corners.
Step 4: Start the engine test and the fan can run normally. After checking the error, install the intake pipe to the correct position.
Step 5: Tighten the fixing screws of the intake pipe, close the hood, and test to ensure that the new radiator fan is working properly and all operations are completed.
B.T. Skaggs
2025-08-24 15:19:25
Works great for pulling or pushing air. It moves quite a bit. Fan is reversible by switching wires around.
Robin
2025-08-07 18:42:00
Installed on a mini excavator to help keep engine compartment cool works well
Morgan W.
2025-08-01 14:04:18
Used this as a trans cooler fan for a built ls. Worked okay but didn’t really seem to cool the fluid just kept it from overheating. It was good quality and a decent size. The Zipties to hold it in work well and was easy to run through the radiator to hold it up.
Karen
2025-07-26 14:45:59
works as it should. installed it as a fan for my transmission cooler
Samantha
2025-07-24 17:55:36
First things first, the product came broken. 100% amazons fault. Should have been boxed to ship, but was sent in a USPS bag. Bag was tossed around and the corners were broken off.Second, I should have noticed the other reviews saying its not reversible. Since the product was damaged, I was going to try it for my application. My plan was to mount the fans to dog kennels to passively blow air thru the kennels. I soon found out there was no push air. Reversed the legs and found it pulled well, but the pitch of the blades are symmetrical so you can’t just flip the blades. The housing is not designed for push ONLY pull. So if u plan to blow air, it won’t.
DM
2025-06-16 18:19:15
Small powerful well made - comes with all the hardware you need - inexpensive - would recommend12v at 80 watts is about 6.6 amps at full power - ran 2 of these fans for a while using a bench DC supply - no overheating or voltage spikes .
Avery C.
2025-06-14 18:16:21
I set it up as a pusher on a supercharger oil cooler hidden behind a bumper with no direct air flow. It keeps my little 13 row cooler warm to the touch after hours of hard driving. The blades are curved, so it will perform better in the pull configuration, but this thing still moves a lot of air. I can hear it turn on when I first start the car, but once the engine's running it's not so loud that it screams over the sound of anything else. This solved my problem and for the price I couldn't be happier.
Robert1234
2025-06-11 17:18:47
Purchased these to make a swamp cooler, the fans seem to be well built however I don't think they are anywhere near 650 CFM. The blades are only about 1.25 inches long, the motor takes up most of the available space for the blades. The mounting hardware that is supplied is very cheap and the little zip ties don't hold well. While technically reversible, the fan sticks out past the shroud when done.- It may work for you but not if you really need 650CFM.
Silvertip
2025-06-09 13:09:36
Like the shroud, a better pusher than a puller for air volume.overall it seems well built and durable .
Dapper
2025-06-04 17:23:56
cant complain at allgreat quality and the fans ripstrongly recommend
Ian Martin
2025-05-31 10:36:04
Easy installation, solidly constructed. Not as much air flow as expected but certainly adequate for the price. Definitely would recommend as utility cooling fan.
B.T. Skaggs
2025-05-30 17:03:37
Works great for pulling or pushing air. It moves quite a bit. Fan is reversible by switching wires around.
Robin
2025-05-23 14:12:05
Installed on a mini excavator to help keep engine compartment cool works well
Morgan W.
2025-05-20 11:43:50
Used this as a trans cooler fan for a built ls. Worked okay but didn’t really seem to cool the fluid just kept it from overheating. It was good quality and a decent size. The Zipties to hold it in work well and was easy to run through the radiator to hold it up.
Karen
2025-05-15 15:33:50
works as it should. installed it as a fan for my transmission cooler
Samantha
2025-04-28 20:42:38
First things first, the product came broken. 100% amazons fault. Should have been boxed to ship, but was sent in a USPS bag. Bag was tossed around and the corners were broken off.Second, I should have noticed the other reviews saying its not reversible. Since the product was damaged, I was going to try it for my application. My plan was to mount the fans to dog kennels to passively blow air thru the kennels. I soon found out there was no push air. Reversed the legs and found it pulled well, but the pitch of the blades are symmetrical so you can’t just flip the blades. The housing is not designed for push ONLY pull. So if u plan to blow air, it won’t.
DM
2025-02-12 17:38:04
Small powerful well made - comes with all the hardware you need - inexpensive - would recommend12v at 80 watts is about 6.6 amps at full power - ran 2 of these fans for a while using a bench DC supply - no overheating or voltage spikes .
Avery C.
2025-01-31 12:37:54
I set it up as a pusher on a supercharger oil cooler hidden behind a bumper with no direct air flow. It keeps my little 13 row cooler warm to the touch after hours of hard driving. The blades are curved, so it will perform better in the pull configuration, but this thing still moves a lot of air. I can hear it turn on when I first start the car, but once the engine's running it's not so loud that it screams over the sound of anything else. This solved my problem and for the price I couldn't be happier.
Robert1234
2025-01-03 13:18:18
Purchased these to make a swamp cooler, the fans seem to be well built however I don't think they are anywhere near 650 CFM. The blades are only about 1.25 inches long, the motor takes up most of the available space for the blades. The mounting hardware that is supplied is very cheap and the little zip ties don't hold well. While technically reversible, the fan sticks out past the shroud when done.- It may work for you but not if you really need 650CFM.
Silvertip
2025-01-02 12:16:21
Like the shroud, a better pusher than a puller for air volume.overall it seems well built and durable .
Dapper
2025-01-01 13:41:34
cant complain at allgreat quality and the fans ripstrongly recommend
Ian Martin
2024-12-20 12:21:54
Easy installation, solidly constructed. Not as much air flow as expected but certainly adequate for the price. Definitely would recommend as utility cooling fan.
Recommended Products
$60.89
$ 27 .99 $27.99