Your cart is empty.
Your cart is empty.Product Description
Fitment
Specification
- Power : high beam 45W/4000 LM(Hi); low beam 30W/2800LM(Lo)
- Voltage: DC 9~12V
- Color Temperature: White 6500K
- Material: Die-cast Aluminum Housing
- Lens material: PMMA
- Beam Type : Hi/Lo Beam
- Life Span:50000H
- Waterproof rate: IP 68
Ensure Safer Drive
DOT,SAE,E-Mark approved on the top, high beam 45Watt 4000lumen, low beam 30 Watt 2800 lumen, sharp cut-off line with uperior light output ensures NOT blind others' eyes while providing the brightest and widest vision.
Package Included
Package comes with all the adpaters for your bike:
- 1 x 7" LED Headlight
- 1x H4 wiring harness
- 1x H13 adapter harness
- 1x dual beam lamp adapter for 2014-up Road King/Road Glide Special
- 1x 4 Pin 2014-UP Harley Headlight Adapter Harness
Laura
September 1, 2025
First off ignore the mess in my garage and my dirty bike. I bought this because the factory halogen light on my bike is dim, and I ride in the dark to work a little over an hour 5 days a week. The install was easy with the provided pigtail and I haven’t had any security light issues so far. It’s plug and play. I initially used the wrong pigtail and had to swap to the other. The light seems brighter than the stock. It looks pretty good on the bike. It fits just like the stock. I’ll update more when I ride to work tonight. I tried to get some photos of stock to aftermarket but from 5 feet away it’s hard to tell a big difference. I didn’t use the instructions. I’m sure they are fine. How many instructions do you need to change a light bulb.Edit to add: I took my bike to work the last two nights. The first night was dense fog. The light worked well in the fog and didn’t glare out any worse than one would expect. The second night was slightly foggy but clear enough i could see about 40’ out. This is further than my stock light let me see. It actually probably saved me from hitting a couple of deer that ran across the road. Increased to 5 stars.
Ghost
August 25, 2025
I only purchased this to light to replace my stock 2010 Vstar headlight. This is very bright and the display pattern is fantastic. A high dollar light for a fraction of the price. Installation was easy and worth ever penny of the price. You won't be disappointed.
Valentine J Power
August 22, 2025
My Yamaha V-Star 650 took a rock to the OEM glass headlight a few days ago, and it gave me the perfect opportunity to upgrade. I looked around at the various LED options and Belt & Road penciled out to have the best value, as well as superior specifications. The one thing that definitely helped me decide to choose their product was the Fitment cross-reference. Although the headlight is designed as a Harley replacement, it installed into my Yamaha without a problem. Everything matched up correctly and I was able to remove the old one and install the new one in 20 minutes.The headlight is definitely bright. When I took it out this morning, the first oncoming car flashed it's brights at me, thinking that I had my high beams on. I have the light targeted fairly close, and I did make sure that it was not shining at oncoming traffic. I really do like that it casts a wide horzontal coverage area close up. This illuminates things very well in that 'last minute' zone.The packaging was superior, the lamp came in perfect condition. All of the components were present and the instruction sheet had good images to verify that I did not install it upside down. I would definitely purchase this product again. Hopefully with the 50,000 hour lifetime, I will never have to.
Troglodytetuxedo
August 15, 2025
I purchased this light for my 2009 Yamaha Vstar 650. It’s my first road legal bike so I’m not very experienced in lights on motorcycles but I was looking for something other than the standard halogen light some I’ve been used to nothing but LEDS or HIDs on all my cars for many years. I didn’t want to break the bank so I found these and looked good enough. It was very easy to install, not extra parts or anything, came with harnesses but I didn’t need them. Once you have it Aimed well it’s a great light. I’m sure the expensive lights have a bit better of beam pattern and brightness but this is more than enough, especially for this price point. The cover is not glass but I’m sure that won’t be an issue. I’m excited to ride more and show off this great looking light on my bike.
Customer
July 29, 2025
This unit had brightness and beam width just as good as the $500 headlights. Everything hooked up and went in very nicely with no issues I had to adjust it up just a little bit but that may have been due to swapping from original to halogen to LED bulbs in the original light. I can see both sides of the road and a head on high beams and in low beams better than having driving lights or the original bulbs. 2008 Yamaha v Star 1100
Efrain
July 13, 2025
I really liked the headlight it fit perfectly and it was plug and play.
Billy Bailey
July 1, 2025
I received my headlight today so I got right after it. Upon opening the box I noticed the packaging was above average with everything fitting snuggly in the box. It comes in a cardboard box with a tamper seal tape so you can see if anyone tried to get into it after shipping. The contents are packaged in styrofoam that I took care not to damage so that I could store my OEM light in it when I was done with the instal. I already knew what I was doing for the installation directions, but I read them anyways just to see how they were laid out. The pictures are a little unclear because they are small but the wording under each points you in the right direction if you have common motorcycle knowledge. All the hardware in the box is easy to identify so a person can tell what they need for their setup. It even gives you a part number if you need the adapter ring for the light (my bike does not require it). I removed my headlight but only unplugged one wire so I could mark which was the high and low beam wires. After taking my headlight out I installed the wiring harness and it goes together smoothly. The high and low beam are marked on the instructions clearly. I plugged the light in and tested it to make sure it would come on, it did not. I simply had to unplug the harness on both sides and reverse it from the way I had it. The light looks very bright in my garage and I am currently very happy with how it turned out. I will update this once I get it out on the road and can test it and take pictures.
Richard Whitford
June 24, 2025
At first I misread the picture and had it upside down. it light up with easy plug and play, but didn't fit. Once I got that figured out, it was perfect. Previous owner had a fan-and-circuit connected LED in an H4 housing, so the reflector didn't work with it creating a flood light. This sealed beam was plug and play, and very bright. I can actually see the road now incredibly well, and I've had no flashbacks from other drivers. It even lights up the road at dusk, and I have no worries about other drivers not being able to see me. The square pattern is perfect for the highways I drive in FL, but on lots of twisties it may not be the best. I can see the sides of the roads well close to me, but my roads are fairly straight or gentle curves On a highway cruiser, it's perfect.
Andre Cormier
June 21, 2025
Less than 15 min installation, from start to finish. No modifications needed to install. Looks great, and definitely brighter than OEM. Will only be able to comment on the beam pattern once I can get the bike out of storage.
Mark k
May 29, 2025
Just installed this on my Victory Kingpin even though its not listed as a fit. The light fit perfectly in the existing bucket. My existing headlight used H8 and H11 plugs, but was also wired with an H4 (for European models). So i plugged this light directly into the H4. The kit did come with an adapter i could have used for the H8 and H11 plugs as well, which is nice to have options. I've yet to take the light outside to test the brightness but in the garage it certainly seems brighter than the stock light.
Customer
April 24, 2025
Well made, works excellent and plug and play instructions easy to follow.
Terry.
February 11, 2025
Put on my 2022 Street glide special with no issues or so I thought first ride and bike coded. Contacted email provided for they said they would send you a free decoder. A week later got reply and they said I had to buy the decoder on Amazon.com and they would send a refund of 7usds. That does not cover the shipping to Canada. And the waiting time. Very disappointed.
Recommended Products