Your cart is empty.
Your cart is empty.JustaDude
2025-08-10 17:57:25
Needed extra long bits, really only the 2nd smallest one, to drill vertically into the soft transom of an older boat I bought recently. Then poured wood hardener liquid into the holes to that soaked into the wood from all directions to make the transom solid again. Worked perfectly for what I needed, was able to drill almost all the way to the bottom with these bits and once cured, the transom is solid as a rock again. Much easier fix than replacing the whole transom for sure :-)
jesse
2025-07-20 17:19:43
7 Pcs Extra Long Brad Point Drill Bit Set,12. Great value and quality. Every toolbox should have a set.. highly recommended.
S. Gardner
2025-06-28 09:52:54
I purchased these to put some rebar and some 4x4s to extend my fence just a few feet because my dog jumps over it. After using the drill bit it started to bend. They worked great up until that point. I guess my advice is to give them a rest after a while so they don't get hot and mend......? If that hadn't happened I would have giving them five stars!
Oleksandr Kotenko
2025-04-26 17:03:01
It took me six months to dull the drill bit.
Jab
2025-04-08 16:10:52
Wood drills worked great very sharp
Dee Dee
2025-03-27 17:27:11
Used to drill holes in the leg bottoms of a small chest to attach addition legs to extreme the height.
L. Dell
2025-02-19 14:36:20
The bits I used worked very good. They should come with a case.
MG
2025-02-14 18:11:59
I had a specific , "one- time- only" need for these extra long drill bits and this set filled the need perfectly. The pointed brad bit tip centered the drill bit exactly in a extremely hard to reach cylindrical area that was impossible to pre-drill ,center punch. I was able to start with 1/8 and then progress up thru to 3/16 until the now weakened , hollowed out metal was easy to drive out with a brass rod.
Leonarda m.
2024-12-23 15:24:20
Aun no las uso
Recommended Products