Your cart is empty.
Your cart is empty.Product Description
SONFILY floating House number with clean look can be used in different surfaces and styles walls. Not matter modern style,farmhouse style,antique style...,Will make your door,house,address,shop more attractive and stylish.
Black modern house number suitable for different surface and styles house number,like brick,wood,rough,stone etc.
Black house numbers suitable for smooth wall or rough sand wall.
8 inch Large house numbers suitable for stone wall.
House numbers black suitable for wood surface.
Large home address numbers are easy to be installed with the instruction and template included.
House number is equipped with a sufficient screw set /template/operating instruction,very easy to set-up.
Floating House Number Installation steps for you:
1. Fix the operation template on the wall with tape.
2. Use a 1/4 drill bit to drill two or three 1.18 inch deep holes according to the screws position on the template.
3. Remove the template and insert the anchors into the holes.
4. Screw the long flat head of the screws into the holes of the numbers and put the spacers on screws.
5. Hammer the screws into the wall slightly. Finished!
For Flush House Number is almost the same steps,just not use the spacers.
Topspin
2025-08-14 13:24:52
I was very happy with the quality of this product. The numbers were solid. Not flimsy. The number template aligned perfectly with the holes. The granite rock I installed them was not flat so I had to chisel some of the surface. It would have been easier to install if there were additional pegs. I needed some longer pointed stainless steel pegs to mix with the shorters ones to help with the irregularities in the granite surface. I would have paid extra to get longer ones to avoid needing to chisel the granite surfaces. I used an impact drill to drill the 1/4 inch holes. Drilling on an uneven stone surface was not easy. I practiced on a scrap rock first to get the hang of doing this activity.
Mark
2025-08-10 11:00:53
These numbers are perfect for the look we want for our house. I had ordered another set from another company before and had to return them, because the zero was so much wider than the other numbers. Because we were mounting them straight up and down, this did not look good. This set did not have that issue. The zero was still slightly wider, but not enough to be an issue. The mounting system was very simple, as well. My recommendation, especially if you are mounting these right onto a brick or masonry type wall, is to first make a templet out of wood. I used the paper templates that come with the numbers to create a layout on a 1/2 inch board first. Then you can drill your holes into that first, and see exactly how the numbers will look. Another tip for helping you hold the board in place on the wall, is to drill one hole into the wall, then put a drill bit, or something else the right size through the board and into the hole in the wall. Then make sure the template is level, and continue drilling the rest of your holes. Hope this helps.
Roro B. Shop'n!
2025-07-26 12:47:59
The media could not be loaded.
Topspin
2025-07-18 18:10:51
I was very happy with the quality of this product. The numbers were solid. Not flimsy. The number template aligned perfectly with the holes. The granite rock I installed them was not flat so I had to chisel some of the surface. It would have been easier to install if there were additional pegs. I needed some longer pointed stainless steel pegs to mix with the shorters ones to help with the irregularities in the granite surface. I would have paid extra to get longer ones to avoid needing to chisel the granite surfaces. I used an impact drill to drill the 1/4 inch holes. Drilling on an uneven stone surface was not easy. I practiced on a scrap rock first to get the hang of doing this activity.
Mark
2025-07-07 16:26:17
These numbers are perfect for the look we want for our house. I had ordered another set from another company before and had to return them, because the zero was so much wider than the other numbers. Because we were mounting them straight up and down, this did not look good. This set did not have that issue. The zero was still slightly wider, but not enough to be an issue. The mounting system was very simple, as well. My recommendation, especially if you are mounting these right onto a brick or masonry type wall, is to first make a templet out of wood. I used the paper templates that come with the numbers to create a layout on a 1/2 inch board first. Then you can drill your holes into that first, and see exactly how the numbers will look. Another tip for helping you hold the board in place on the wall, is to drill one hole into the wall, then put a drill bit, or something else the right size through the board and into the hole in the wall. Then make sure the template is level, and continue drilling the rest of your holes. Hope this helps.
Roro B. Shop'n!
2025-06-24 13:21:58
The media could not be loaded.
lili
2025-06-02 16:25:06
Looks very modern and sleekI highly recommend
Mark in NC
2025-05-29 16:41:59
Worked perfectly. Measure carefully- the fit is precise. If you tape multiple number templates together to install, make sure the template outlined align, not just the paper. I did a 1 and a 2 and the ended up being slightly out of line. If you are installing on wood or other hard surface, skip the anchors and use a smaller drill bit. 1/4†is way too big.
Tram
2025-05-05 15:38:56
The column these are installed on is about 3/8" thick and I used a 9/64 drill bit. Was able to pound them in with my palm but I would recommend a rubber mallet. Nice and secure, should hold up and time will tell.
Carlos Martins
2025-04-25 12:44:53
Easy to install.
WestCoaster
2025-04-20 11:38:10
I'm working on an apartment building remodel and needed to replace the old and cheap sticker labels with something better. I couldn't find anything cool at Home Depot, but Amazon has these cool "chrome" finish and 3D effect letters that looked classy and more expensive. Looks great, has good adhesive to stick to door and size was just right. ðŸ‘
jim nairn
2025-04-19 21:56:13
Great product, easy to install and look great.
lili
2025-04-05 10:19:39
Looks very modern and sleekI highly recommend
Mark in NC
2025-04-03 10:56:04
Worked perfectly. Measure carefully- the fit is precise. If you tape multiple number templates together to install, make sure the template outlined align, not just the paper. I did a 1 and a 2 and the ended up being slightly out of line. If you are installing on wood or other hard surface, skip the anchors and use a smaller drill bit. 1/4†is way too big.
Tram
2025-03-19 15:14:17
The column these are installed on is about 3/8" thick and I used a 9/64 drill bit. Was able to pound them in with my palm but I would recommend a rubber mallet. Nice and secure, should hold up and time will tell.
Carlos Martins
2025-02-27 13:46:55
Easy to install.
WestCoaster
2025-02-21 18:39:44
I'm working on an apartment building remodel and needed to replace the old and cheap sticker labels with something better. I couldn't find anything cool at Home Depot, but Amazon has these cool "chrome" finish and 3D effect letters that looked classy and more expensive. Looks great, has good adhesive to stick to door and size was just right. ðŸ‘
jim nairn
2025-02-15 14:36:28
Great product, easy to install and look great.
Recommended Products