Your cart is empty.
Your cart is empty.Product Description
Skymoatled is a professional lighting company that specializes in research and development, production, and sales. We have our own factory, standardized production processes, strict quality inspection system, excellent product quality, safety and reliability, and long service life.
Product introduction：
Material Introduction:
1.Using 5730 large-sized LED.
2.High-efficiency drive power supply.
3.Aluminum bracket.
4.Transparent PC lampshade.
5.White PC-V0 Flame Retardant Lamp Head.
Brightness Upgrade:
1.Using a new large size 5730 0.5W LED, brighter than 2835 0.2W LED,our 8pack brighter than other 10pack.
2.Our each light power to 50W, 7500LM high output, more than 75% energy saving than fluorescent lamps.
3. 270°Beam Angle,each light can illuminate up to 75 square feet.
Convenient Wiring:
1. Support hard wire connection.
2. It includes a plug cable with a switch, which is very convenient for plug and play.
3. Support extended connection, with up to 4 lights connected in series, greatly reducing wiring time and cost.
4. Support seamless connection.
Mounting accessories:
1. 8 pack of accessories, including small connectors, Plastic bolts, tail covers, metal clips,slings and screws.
2. 6pcs connecting cable.
3. 4pcs power cord.
4. 8pcs power hard wire.
Hanging mount:
Concrete wall mounting surface
1.Drill hole size 0.236in.
2.Tap in the plastic bolt.
3.Screw in the metal hook.
4.Engage the lanyard to the metal hook.
5.Fix the metal clip to the small hanging.
No drilling around the beam installation
1.Put one end of the lanyard around the overhanging beam and latch it on the lanyard.
2.Use the screws to fix the metal clip on the small hanging head.
3.Embed the luminaire into the metal clip.
Surface mount:
- Wooden mounting surface:
- Secure the metal clip with screws and embed the light in the metal clip.
- Plasterboard mounting surface:
- 1. Drill hole size 0.236 in.
- 2. Screw in plastic bolts.
- 3. fix the metal clip with screws.
- 4. Embed the light into the metal clip.
Application:
T8 integrated LED tube light can be widely used for garage, shops, supermarkets, warehouses, workshops, offices, and homes lighting. It provides super bright light and is a great choice.
WVU Fan
2025-09-01 14:07:12
These work great! Was able to plug into an outlet controlled by a wall switch, which made installing them quick and easy. Very nice light produced in what was a very dark garage.
SBH
2025-07-24 12:55:44
Extremely light and easy to configure package deal. Hung with plugs for now but I can reconfigure once my junction boxes are in.
Ms M
2025-07-07 13:42:32
Wanted to get a nice, slimline set of lights for my new workshop and these were exactly what I needed. The came quickly to the house from the seller. These lights were really easy to install and they give you a variety of ways to mount them and connect them to your house wiring. I wanted to hardwire mine, so I had to use the “pigtail†connector. If I have one complaint, it’s that the hardwire, “pigtail†connector is really short and my first lights had to be REALLY close to the junction box. I would have been better if I could have gotten the first ones a little further away. In addition, the connecting wire from that “pigtail†is really fine and I had a little bit of a challenge to connect it to the 14/2 Romex, house wire. Also, the wire to connect the first light to the subsequent lights, down stream could be a little linger to give you the option of spacing them out a little further, but that is not a big deal. Lastly, I think it would have been nice if there were a way to “lock†the connection wire to the light. Not a big deal, but it look like if you were to accidentally bump the connector, it could easily come off. Overall, it is a good value and provides a significant amount of light for your home/office/workshop.
Alan Venable
2025-06-02 14:12:58
Notice: there are not enough cords for plugging in to the wall (other options are provided for linking these together but tht doesn't work for me). If I had read the descriptoin more closely, I would have noticed there were only half the number of outlet cords that are needed. So, I had to purchase additional cords separately.Otherwise, these are simple to assemble and very birght. They will make a great replacement for my old and dieing flurescents.
Merrideth chase ward
2025-05-30 17:24:07
The media could not be loaded.
micheal f reed
2025-05-04 17:37:57
Used these in my barn. huge improvement over fluorescent and much brighter. Been in service for several months and work great
Allen Jennings
2025-05-02 14:49:29
I replaced three, 8' ballasts with six of these 4' LED's in our 3 car garage. The install was simple, and I'm no electrician. These provide so much more light than the ballasts did and because I ordered the pack of 8 I ended up putting a seventh one right above my workbench that plugs into an outlet. It was going to cost me more to replace the ballast bulbs than this entire pack costs. Would not hesitate to buy again.
nyc2020
2025-02-17 14:10:00
I bought 16 of these to light up a 4000 sq ft warehouse that is undergoing some renovation. Lights are nice and bright. Very surprised at how stiff these are - I've purchased another brand off of amazon and if you held those by one end you would see them slightly bend while these remain stiff and straight. Gets shipped in possibly the strongest box I have ever seen - I think you could run the box over with a car and not have the lights damaged at all - makes it pretty hard to open the box so be prepared with a sharp heavy duty box cutter. Came with plenty of hardware for hanging or fastening directly to ceiling, even some extra bits and pieces for the inevitable tiny screws that will be dropped and never found again.A couple of problems for me though might not be a problem for you: One option for mounting the lights is to use the included wire and hook to hang from the ceiling. Problem is that this method locks you into having the lights about 16-18 inches from the ceiling. While that might be fine for some applications, I wanted/needed them higher. I purchased these wire rope clips to adjust the length of the wire to what I needed: https://www.amazon.com/dp/B0CJF7NC3F?ref=ppx_yo2ov_dt_b_fed_asin_title Note that these wire rope clips are a real pain to put together due to the small size of the wire and the small size of the hardware but they work great. Problem number 2 is that, as described in the description, the 8 piece kit only comes with 4 on/off switches with plugs. This means that if your intention is to plug in these lights into a normal 2 or 3 prong outlet you will have to attach at least 2 to 4 lights together. Not a problem if you use the option to directly wire them into your existing wiring with wire nuts.Overall a very good purchase.
Recommended Products