Your cart is empty.
Your cart is empty.9.9102G Low Profile Bump Stop Universal Low Profile Bump Stop for cars, trucks and SUVs, Black - 2PCS
Sean A.
2025-08-29 11:11:05
Just what I need
Customer
2025-08-27 14:21:37
Perfect fit
DAMON R.
2025-08-26 10:30:11
These are built so cheaply, you cant even put the lock nut on that comes with it ,, the bolt easily spins in the rubber !So you have 0 way to tighted , even snug it up ,, as the bolt spins 🤷ðŸ¼â€â™‚ï¸ðŸ¤·ðŸ¼â€â™‚ï¸ðŸ¤·ðŸ¼â€â™‚ï¸
Sean K.
2025-08-21 18:58:20
JFYI, while the part number is the same as Energy Suspension...the part is clearly not up to their standards. I mistakenly thought it was a genuine ES part....the real thing is only $2 more....I was duped by the P/N.Seems pretty low quality. If I were using this for a suspension and not just a cushion to keep from marring up wheels on my tire changer, I would return it and get the real thing. These aren't evenly domed and have cracks where it's poured from a mold. I've bought genuine Energy Suspension bump stops in the past....and these are far lower quality just in terms of appearance.
John Barlow
2025-08-14 12:05:10
To replace old bump stop on my 1954 f100 truck..
JAG
2025-08-09 13:39:03
If you use the nylock nuts, at least in my case, as you tighten the nuts and get to the nylon locking portion, the nuts will stop going down the bolt and start to spin the bump stop. Then when you hold the bump stop from turning, the heads of the bolts will spin inside the urethane bump stop and it will not tighten. I had to use regular nuts with liquid locktite on my Nissan pickup.
Brian D.
2025-07-31 14:02:03
The polyurethane bump stops have too long of a bolt for my setup would be allowed and needed to be trimmed but that was better than the bolts being too short. They came as a pair, one of the bolts turns inside the Polyurethane preventing it from being fully tightened but the nylock nut will not allow it to fall away. The otherside tightened down fine.They have good rebound and other than the bolt are good. I would consider buying them again.
Gregory F. Luckinbill
2025-07-18 12:17:29
It's simply a rubber casting around a 38" bolt. For me, this amounted to the bolt spinning inside the rubber when I attempted to remove the whole bumper from my project, had to cut off&replace. I recommend conventional nut hardware to the provided Nylock nut, and the manufacturer to use something with more mechanical grip than a hex-head. The rubber is quality.
Sean A.
2025-07-17 11:32:15
Just what I need
Customer
2025-05-31 16:05:20
Perfect fit
DAMON R.
2025-04-08 12:19:09
These are built so cheaply, you cant even put the lock nut on that comes with it ,, the bolt easily spins in the rubber !So you have 0 way to tighted , even snug it up ,, as the bolt spins 🤷ðŸ¼â€â™‚ï¸ðŸ¤·ðŸ¼â€â™‚ï¸ðŸ¤·ðŸ¼â€â™‚ï¸
Sean K.
2025-03-12 10:14:48
JFYI, while the part number is the same as Energy Suspension...the part is clearly not up to their standards. I mistakenly thought it was a genuine ES part....the real thing is only $2 more....I was duped by the P/N.Seems pretty low quality. If I were using this for a suspension and not just a cushion to keep from marring up wheels on my tire changer, I would return it and get the real thing. These aren't evenly domed and have cracks where it's poured from a mold. I've bought genuine Energy Suspension bump stops in the past....and these are far lower quality just in terms of appearance.
John Barlow
2025-02-10 14:50:13
To replace old bump stop on my 1954 f100 truck..
JAG
2024-12-24 11:55:46
If you use the nylock nuts, at least in my case, as you tighten the nuts and get to the nylon locking portion, the nuts will stop going down the bolt and start to spin the bump stop. Then when you hold the bump stop from turning, the heads of the bolts will spin inside the urethane bump stop and it will not tighten. I had to use regular nuts with liquid locktite on my Nissan pickup.
Brian D.
2024-12-23 16:45:19
The polyurethane bump stops have too long of a bolt for my setup would be allowed and needed to be trimmed but that was better than the bolts being too short. They came as a pair, one of the bolts turns inside the Polyurethane preventing it from being fully tightened but the nylock nut will not allow it to fall away. The otherside tightened down fine.They have good rebound and other than the bolt are good. I would consider buying them again.
Gregory F. Luckinbill
2024-12-16 12:26:07
It's simply a rubber casting around a 38" bolt. For me, this amounted to the bolt spinning inside the rubber when I attempted to remove the whole bumper from my project, had to cut off&replace. I recommend conventional nut hardware to the provided Nylock nut, and the manufacturer to use something with more mechanical grip than a hex-head. The rubber is quality.
Recommended Products
