Your cart is empty.
Your cart is empty.Product Description
Installation Steps
Installation first step
1. Remove the original gear shifter knob.
2. Remove the aluminum alloy cover from the bottom of the original car shift knob
Installation second step
3. Match the size of your gear stick from one of 3 black rubber adapters, and install on the gear stick.
Installation third step
4. Put into the aluminum alloy bottom cover of the new shift knob into the gear shifter rod.
Installation fourth step
5.Finally the shifter knob is also set on the bar and tightening the aluminum alloy cover.
gear shift knob
Adapters size chart
3pcs different plastic adapters of shift gear knob inner diameter are 0.31inch, 0.39inch, 0.47inch (8mm,10mm,12mm), available for your choice.
- Attention: If the three screw sizes are not suitable for your car, I suggest that you can use tape wrapping on your gear stick and then tighten it to solve this problem.
Product parameters and information
Specification:
1.Product name: Metal Shifter Knob
2.Material: Aluminum Alloy & Leather
3.Color: Gray
4.Product size chart Length is 7.09inch (180mm) wide is 1.35inch (34.29mm)
5.Due to manual measurement, please allow an error of 0.1-0.2inch, thank you for your understanding.
- Attention: 1. If your MANUAL car reverse gear needs to be lifted, then it can't be used
- Attention: 2. If your AUTOMATIC car reverse gear needs button lock, then it can't be used
- Attention: 3. If your original manual gear knob can't be removed, then it can't be used.
- Attention: 4. Before buying, please make sure that the size of the adapter is suitable for your car gear stick size.
Brandon R.
2025-08-11 09:02:02
It came in fast and was super simple to install. In my 1998 Honda civic it’s super light weight and well made. It feels light and comfortable, amazing price.
Justin Butler
2025-08-09 11:05:14
Picture online and what I received are two different colors. Advertised as gold came more like burnt orange. Other than that is a great product.
Ruben
2025-07-20 18:02:36
Is a great fit, it looks better than the original in my opinion.
SE
2025-07-15 16:28:32
Very easy install in my 2015 Subaru WRX STII used the 12mm adapter and threaded it to the shift knob, and screwed the shift knob onto the shift adapter as tight as i could. It goes down so far you’re unable to see the actual shifter itself which was my biggest fear getting this. Glad I got it, it also was able to be same day’d too!Really sturdy solid feeling knob for the price. Bigger than I expected but it works cause I got pretty big hands. Matches my car color too!Will update if I see any unforseen damage or any problems I experience in the future. For now, as of day 3 it is working very well.
Will quenichet
2025-06-23 15:48:34
I got this shifter for my manual Tacoma, way more ergonomic than the standard knob and was easy to install. The only problem is that the interior screw that holds the piece together is simply too short (about a quarter inch or 1/8in short). Popped loose first time driving with it. Ran to Home Depot and got a slightly longer screw and it worked like a charm. While it’s not a huge deal, it does show semi-poor workmanship and can lead to dangerous outcomes. Nobody wants to have to put more effort into making a product usable. I like the product, but be sure to replace this screw to make it safe and usable.
Gindi F.
2025-06-14 21:54:52
This is my favorite truck upgrade not gonna lie cheap adapter but very snug. Easy to clean and gas not been tarnished
Ryan Clark
2025-05-09 21:19:46
This thing’s packaging was in no way glamorous and looked like I came off the shelf at the bargain bin but all of the 2 parts were there. Install was a little harder for me because the shifter shaft wasn’t circular so I had to do a lot of drilling but chances are you’re gonna have to adjust the hole to the right size yourself as well. The screw on method is much better than these other Allen key tighten method because it doesn’t come loose. One thing I’ll say is I was disapointed to find there was no stop in the knob to keep it from sliding all the way down the shaft. Hasn’t been a problem yet but I expect if you don’t get that plastic piece snug you’ll have a problem. Just put a piece of wood or something on the inside of the unscrewable top so it stops sliding down and you should be fine. Have loved it so far!
jared
2025-04-07 10:40:21
Light weight
Alice-Joker
2025-04-02 13:55:22
20ã‚ャンターã«å–り付ã‘ã¾ã—ãŸã€‚アダプターãŒä»˜å±žã—ã¦ã„ã‚‹ã®ã§ã€å•é¡Œãªãå–り付ã‘られã¾ã™ã€‚車検時ã«ã¯ã‚·ãƒ•ãƒˆãƒ‘ターンã®ã‚¹ãƒ†ãƒƒã‚«ãƒ¼ãŒå¿…é ˆã«ãªã‚Šã¾ã™ã€‚
AK
2025-03-30 11:14:17
太ã•ã‚„é•·ã•ã€é‡ã•ã¯ã‚¯ãƒªã‚¹ã‚¿ãƒ«ç³»ã¨æ¯”ã¹ã¦æ´¾æ‰‹ã™ãŽãšä½¿ã„ã‚„ã™ã„ã§ã™ã€‚ãŸã ã€ãƒã‚¸ã‚¢ãƒ€ãƒ—ターãŒæ¨¹è„‚製ãªã®ã§é•·ã„ç›®ã§è¦‹ã‚‹ã¨ãã“ã®è€ä¹…性ã ã‘ãŒä¸å®‰ã§ã™ãŒä»Šã®ã¨ã“ã‚å•é¡Œã¯ãªã•ãã†ã§ã™ã€‚
鈴木康å¸
2025-03-06 13:13:27
ãªã‹ãªã‹è‰¯ã„æ„Ÿã˜ã§ã™ã€‚
後藤雅也
2025-02-16 14:42:32
é•·ãã¦ã‚·ãƒ•ãƒˆã‚’変ãˆã‚‹æ™‚ã€æ‰‹ã®ç§»å‹•è·é›¢ãŒçŸã„åãŒè‰¯ã„。シフトä½ç½®ãŒç„¡ã„ã®ã§è»Šæ¤œã¯ç„¡ç†ã ã¨ã®äº‹ã€‚
å‰å·çœŸäºº
2025-02-12 11:46:24
手ã«é¦´æŸ“ã‚“ã§ä½¿ã„ã‚„ã™ã„。
Recommended Products