Your cart is empty.
Your cart is empty.Product Description
About the ABN AC Compressor Clutch Remover Installer Puller Tool Auto Air Conditioning
If your vehicle’s compressor or compressor clutch does not cool or cools poorly, is loud and noisy, or even seizes up, it is time to for a replacement.
Sometimes the clutch assembly can be very difficult to remove from the compressor, but the ABN Air Compressor Clutch Rebuild Removal Tool Kit cuts down on removal time on any R&R job.
*Pulley/clutch holder and 3-jaw puller not included.
A Closer Look
GET THE JOB DONE
You can remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors, GM R4 and A6, HR-6, DA-6 and V A/C compressors, sander compressors SD 505, 507, 575, 708, and 709.
BUILT TO LAST
Each piece is constructed from stainless steel with a black coated finish for strength and to resist rust and corrosion with proper care and lubrication.
EASY STORAGE
All contents come inside a heavy-duty plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
Who We Are
Auto Body Now is a family owned company based out of South Dakota. We have an exceptionally strong Internet presence, sending out over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.
MORENIKE
2025-09-02 18:56:39
Hace el trabajo
Jim Bucklin
2025-09-01 17:12:43
Price was low enough I purchased for one time use. Will probably not need again.
crawdad
2025-08-29 15:54:22
I was able to remove clutch plate and pulley but couldn't install them. I used a 3-jaw puller on the pulley but a little difficult because the back of the pulley is not flat. It's possible that the kit is not for this compressor but the arbors, silver and black, were, for some reason, the same size, too small, and didn't screw on to the center shaft screw. I rented the OEM kit at Autozone to complete the job. This was on a 2003 Impala where, even after unmounting the compressor, you can just lower it a few inches but still enough clearance.
Derk Anderson
2025-07-13 15:07:18
worked like a champ
Kindle Customer
2025-07-04 18:05:00
This could be an awesome tool. However, if I have never used this tool, which is still the case , please explain, how am I supposed to know how to use this tool, and what parts exactly it can be used for ?? This tool came with no instructions. There are no youtube videos, no anything, anywhere. Its a tool. Turns out, it is just interesting metal pieces and screws unless there are some form of usage instructions included. All we could work out is how it could , maybe work , like this? It didn't. It is not a pulley puller as advertised. You see a pulley puller has clamps on it, but this is some screws and discs. Thankfully i found an excellent youtube video, with an excellent mechanic, and with the help of wd40, and a pry bar the pully magically slid off , and we replaced it within the hour. So , unless you already know what this is for, its just some cool metal screws and discs.
Charles F.
2025-06-11 10:17:41
It's a decent set to get the job done
RPM
2025-05-15 15:19:18
The tool didn’t work on the compressor. I ended up damaging the compressor trying to remove the clutch. I wasn’t happy at all !
gotcha6
2025-05-08 09:13:18
I bought this tool to service the clutch bearing on my GM A/C unit (2000 Blazer). It did have the capability to REMOVE THE CLUTCH. However, to service the bearing, I needed a gear puller to remove it (I had that) and a press to get the bearing out. It was shot. half the balls were missing. I was afraid I would be stranded if it seized up. Upon getting the bearing off and back on, the tool kit I had had no capability to pull the pulley back onto the shaft as I needed. Neither was I able to pull the clutch back on, but had to drive it on with a hammer. All in all this tool did what it said - IT PULLED THE CLUTCH OFF. But be aware that more tools are needed than in this kit to reinstall and get back in service.
Muy buen producto
2025-05-02 18:55:19
buena calidad
Edgar Leyva Valdes
2025-04-05 15:04:31
Buena calidad del material
Enrique Hernandez
2025-02-16 10:08:12
Aún no lo utilizo ,se ve de buen material espero al momento de usar no tenga algún problema
luis a.
2024-11-23 16:07:42
Buen producto de buena calidad
Recommended Products
$2.79
$ 0 .99 $0.99