Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools Straight Shank Carbide Indexable End Mill
Accusize Straight Shank Carbide Indexable End Mill
The 3/4" straight shank indexable end mills are for general machining work. The triangle carbide TPG inserts help you save time and money. When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge. When you buy the replacement inserts, be noted that the larger nose angles and larger tip radii enable a stronger cutting edge, but they result in increased vibration and a rougher finish. Beyond, be noted that the listing has our recommended cutting speed of the indexable shell milling cutters with straight shanks.
- Comes with TPG inserts installed
- Uses standard triangular inserts.
- Positive rake 90°, right-hand cut.
**Please note that we keep upgrading the products without further notification. Sometimes you will receive the products with Tin coated carbide turning milling TPG inserts. The coated inserts last longer and can run at faster speeds than uncoated ones.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Specifications and Diagram
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Recommend Cutting Speed
- V= Cutting Speed (m/min)
- f= Feed per tooth (mm/Z)
- ae=Cutting width(mm)
**For Reference Only
Perry H.
2025-08-31 11:12:43
I have needed one for a long time. kept bowering the one from the shop. The cost was what got me to get it. perfect for my needs.
E. Morrison
2025-08-30 11:30:01
I bought this one because I thought it used the same inserts I just grabbed from the shop dumpster. These are the next size smaller. Still, I've cut wood and steel with this and it's still on the first corners of the inserts.
John
2025-08-27 15:34:14
This end mill is great and I can face metal leaving very smooth finishes! I highly recommend it!
Steven E.
2025-08-01 17:30:58
Having never used a flycutter or an end mill larger than 1/2", this face mill by Accusize gives me a totally new capability - efficiently facing off large areas without having to grind a flycutter bit. The first test cut made with the tool produced a mirror-like finish, which exceeded my expectations. The only downside to the purchase were the inserts shipped with the tool. The inserts are not a standard TPG insert. They have a flat next to the radiused point and the entire cutting edge has a chamfer on the cutting face! Both of those seem likely to cause major problems with the inserts rubbing instead of cutting, soo I didn't even try to use them. Fortunately, other reviews questioned the quality of the supplied inserts and I purchased this pack of 10 inserts along with the face mill, https://www.amazon.com/gp/product/B00EUG0H4O/ . I was pleased to note that the cutting point of these inserts installed in the face mill were equidistant from the back surface within 0.0002" .
Customer
2025-07-12 16:45:16
As described and delivered on time.
Joel M
2025-07-02 11:26:43
I've only used this on 6061-T6511 aluminum bar, but at 1200 RPM it works great! I'm sure it would cut faster but I don't have an enclosure on my mill. I cut off about 0.7" on the shaft length to fit it into a 3/4" TTS R8 collet. Works great and the Z height is repeatable.
Philip Riggs
2025-06-13 18:56:55
Fantastic price for superb quality. This shell mill is if very high quality on par with tooling several times the price. Produces a fantastic surface finish and just what I needed to add to my tooling.
Just Thomas
2025-06-06 11:25:36
The media could not be loaded.
Denny
2025-06-03 11:24:03
Tool is a quality tool for the price and works for my usage. Being a novice with limited machining needs and a budget the tool was my solution for opening up a 1 1/4 inch hole to a 1 1/2 inch ( I know not a drill bit) but the drill bit of the same size is nearly the same price, and I seldom use my 11/4 inch drill bit So. Yeh,,part time cautious hack but it did the job, it's clearances do not compute but it worked for me and it also works very well for surface cutting and finishing, go figure.
Rick
2025-05-25 20:06:07
I am using this to mill components with my lathe. Cuts quickly and leaves a great finish.
Derek L.
2025-05-09 17:10:06
Used it to mill down a wrench. Handled the hardened tool steel Well, no damage. Wish the company made tooling for Morse taper #3, better then nothing
akeele
2025-04-14 17:25:44
Cuts and works extremely well, more than satisfied with purchase
Peter
2025-04-11 11:18:00
I'm a hobby machinist and Accusize delivers good value. Spin this cutter as fast as your machine will go for best results.
Perry H.
2025-03-27 16:02:12
I have needed one for a long time. kept bowering the one from the shop. The cost was what got me to get it. perfect for my needs.
E. Morrison
2025-03-19 17:03:15
I bought this one because I thought it used the same inserts I just grabbed from the shop dumpster. These are the next size smaller. Still, I've cut wood and steel with this and it's still on the first corners of the inserts.
John
2025-02-25 18:46:11
This end mill is great and I can face metal leaving very smooth finishes! I highly recommend it!
Steven E.
2025-02-16 12:08:51
Having never used a flycutter or an end mill larger than 1/2", this face mill by Accusize gives me a totally new capability - efficiently facing off large areas without having to grind a flycutter bit. The first test cut made with the tool produced a mirror-like finish, which exceeded my expectations. The only downside to the purchase were the inserts shipped with the tool. The inserts are not a standard TPG insert. They have a flat next to the radiused point and the entire cutting edge has a chamfer on the cutting face! Both of those seem likely to cause major problems with the inserts rubbing instead of cutting, soo I didn't even try to use them. Fortunately, other reviews questioned the quality of the supplied inserts and I purchased this pack of 10 inserts along with the face mill, https://www.amazon.com/gp/product/B00EUG0H4O/ . I was pleased to note that the cutting point of these inserts installed in the face mill were equidistant from the back surface within 0.0002" .
Customer
2025-02-07 10:15:33
As described and delivered on time.
Joel M
2025-02-05 10:03:43
I've only used this on 6061-T6511 aluminum bar, but at 1200 RPM it works great! I'm sure it would cut faster but I don't have an enclosure on my mill. I cut off about 0.7" on the shaft length to fit it into a 3/4" TTS R8 collet. Works great and the Z height is repeatable.
Philip Riggs
2025-01-31 14:34:37
Fantastic price for superb quality. This shell mill is if very high quality on par with tooling several times the price. Produces a fantastic surface finish and just what I needed to add to my tooling.
Just Thomas
2025-01-13 16:52:49
The media could not be loaded.
Denny
2025-01-06 11:33:25
Tool is a quality tool for the price and works for my usage. Being a novice with limited machining needs and a budget the tool was my solution for opening up a 1 1/4 inch hole to a 1 1/2 inch ( I know not a drill bit) but the drill bit of the same size is nearly the same price, and I seldom use my 11/4 inch drill bit So. Yeh,,part time cautious hack but it did the job, it's clearances do not compute but it worked for me and it also works very well for surface cutting and finishing, go figure.
Rick
2025-01-04 16:37:06
I am using this to mill components with my lathe. Cuts quickly and leaves a great finish.
Derek L.
2025-01-01 18:02:21
Used it to mill down a wrench. Handled the hardened tool steel Well, no damage. Wish the company made tooling for Morse taper #3, better then nothing
akeele
2024-12-03 19:25:53
Cuts and works extremely well, more than satisfied with purchase
Peter
2024-11-20 10:14:48
I'm a hobby machinist and Accusize delivers good value. Spin this cutter as fast as your machine will go for best results.
Recommended Products
$11.29
$ 5 .99 $5.99