Ãeath
2025-08-19 13:57:14
Solid unit. Fit my '05 Tahoe perfectly. The banjo bolt is a 10mm. ( OEM was 12mm )9/16 Flare Nut wrench is what is used to disconnect / reinstall the hard line that feeds into this hose.The bolt holding to the frame is a 13mm.The bolts on the upper control arm, and knuckle are both 10mm ( May need a 3/8 socket to hammer on them if rounded. )May need some minor influence when installing the hose.
Duane Jackson
2025-07-30 12:24:09
Works perfectly
Mike71
2025-07-25 15:24:21
Originally bought a Carquest brake line. Didn’t fit right. Bought this one and it fit great.seams higher quality to. Came with new bracket and spring clip too which Carquest one didn’t.
Paul M. Eason
2025-07-15 14:04:19
2002 silverado 1500 4x4 Not the same as OEM. Missing the steel tube at the caliper. It fits and worked though.
Kyle
2025-07-08 16:30:31
Good product for the money. Matches description with proper fitment on my 2003 Chevrolet Silverado 1500
J. Stipic
2025-06-29 12:10:30
ACDelco is a name I assumed to be synonymous or at least equivalent to OEM for a GM product. I'll at least give it the benefit of the possibility that Amazon may be in error in stating this is an exact match for my 2002 GMC Yukon Denali XL AWD. First off; The Banjo Bolt Lug is different than the OEM. I could have been somewhat more content with the difference as long as it would have fitted properly onto the calipers... ..It did fit one caliper okay, but the other caliper/"Front Passenger Side" I had to grind away part of the triangular lug in order for it to have fit the port to which the banjo bolt fits through. Otherwise, the banjo bolt lug would hit the caliper and prevent it from freely bottoming out on the recess for the fluid inlet port. Then to make matters worse... ..after attaching the hose mounting brackets to the specific intended mounting points, this resulted in the hoses being too short when the steering wheel was cut to either extreme. The hose was stretched to nearly a sharp 90 degree angle at the first hose mounting bracket. I was able to provide additional slack in the brake hose by not mounting the second brake hose mounting bracket in the intended mounting point. I basically shifted the second bracket a bit closer to the first bracket in order to provide sufficient slack in the hose to lessen the 90 degree angle that was forming in the hoses with the steering wheel turned to either extreme. Oh, this is made in China too.... ..Oh how I REGRET this purchase. Plus one of the hoses was in a sealed plastic bag within the ACDelco Box and the other hose was just crammed into the box without being enclosed in a bag. If it were not for me needing this vehicle back on the road asap, I'd definitely return these brake hoses!!! As time permits, I'll be checking local parts stores in hopes of finding a better match.
Ortizcva
2025-05-19 11:31:57
Perfect fit
LEVONTE THOMPSON
2025-04-18 16:43:43
Great part. Great price Great product. Great price. Great value. 5 Star experience.
Rigby Veinot
2025-03-28 12:27:32
Front brake job
Gage
2025-03-22 17:47:27
Good product!
Dave
2025-03-02 15:12:21
Fit my 2005 silverado. Came with all 3 new brackets. Only improvement would be to include new bolts for the brackets. I will buy this again and recommend it to anyone who will listen.
Gary VandenBosch
2024-12-25 16:45:52
No problems