Your cart is empty.
Your cart is empty.Yukon Gear & Axle Adapter Sleeve For GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal
Consumer
2025-09-02 17:21:46
I had an old pinion to install on a newer housing with the triple lip seal. This fit the old pinion yoke and installed without a problem.
Big D
2025-07-29 12:31:55
I had a pinion leak on my 2008 Dodge 2500 and this was a perfect fit. I think Amazon needs to update their information for "It will fit!" Good quality and easy to install.
S. Griffin
2025-07-27 15:43:44
This is the seal behind yoke (which rarely fails). Yukon part # YMS2286 is pinion seal.
Customer
2025-07-13 18:02:56
Worked perfectly
jason
2025-07-08 16:48:02
Works great no leaks
Customer
2025-06-29 09:29:47
Fit my 2006 Duramax with AAM 11.5 diff, this is the pinion yoke seal/wear sleeve you need to replace when replacing the pinion seal on the diff, you can remove this seal with a pry bars and working your way around the seal to pop it off the yoke, I applied a thin layer of RTV to the yoke and tapped the seal on using a wood block and dead blow mallet until it was fully seated.
Wyatt
2025-06-21 14:59:33
Worked great and fit great on my 2006 duramax.
Eric E. Wilson
2025-05-21 17:56:07
How to replace:Thread in two of the bolts and lock the yoke in a vise catching the bolt heads with seal up.Use two large screw drivers opposite each other to pry the seal sleeve up equally at both sides. It will be easier than expected. The seal has lived a life soaked in gear oil.Clean the land area with carb cleaner and a rag. Carb cleaner will help get residual ribber off.Then use scotch bright to get all of the old residual rubber off from old sleeve land.Find a firm cup that fits inside the sleeve to push it on.Lube the land and inside the seal very lightly with liquid soap.The seal will push on really easy. No hammer, just firm push. You may not need the cup.Put grease lightly on all three rubber seal friction surfaces; dry assembly is not good here.Put teflon thread sealer on the splines or they will leak.Fits 2006 Ram 2500 AAM axle
Michelle D
2025-05-11 20:40:49
Perfect fit on the 2004 duramax crew cab short box. Would recommend this over any other speedy sleeve
Ozue Velasco
2025-03-09 21:09:00
Tengo una Ambulancia Tipo 3 Originaria de Canadá actualmente en México y se me echo a perder esta pieza, en la agencia Chevrolet México no me la consiguieron, tampoco en la GM de Estados Unidos, y resulta que aquà en Amazon si la pude comprar y 100% nueva, Super Mega Recomendado! Mi ambulancia volvió a la vida gracias a esta pieza
Fixit
2025-02-10 15:21:26
Could not get a OEM Part from dealer so I got it here it works excellent 👌
ddot
2025-01-13 11:21:32
Installed this on a 05 ram diesel, stopped the leak at pinion after a new seal install, you'll need a 12point 1 7/16 socket on a dodge
Recommended Products
$94.58
$ 41 .99 $41.99