Your cart is empty.
Your cart is empty.Product Description
Perfect For Many Projects, High Silicone Content & Specially Formulated
- Adhesive Guru Silicone Mold Release Spray is an outstanding release agent for making general purpose molds and castings. Epoxy resin, RTV silicones and rubber molds will be easily released with this product.
- Application; First of all, all grease, oil and dirt residues must be completely cleaned from the surface. The effectiveness of the release agent is inhibited especially by oil and grease. Shake the can thoroughly with release spray after proper cleaning. Then apply the release spray to the mold by spraying it as finely as possible. Be sure to cover all mold angles and maintain a distance of 8 to 12 inches from the mold while spraying. Wait two or three minutes and it's ready!
Clean Application & No Residue
Our releasing agent is easily applied through the use of an aerosol spray. Once your project is finished drying, there will be no sticky or oily residue left for you to clean up.
After drying, the mold release allows for easy removal of the finished part from the mold. Our silicone release agent prevents materials from mixing and sticking together.
Wide Variety of Usage Areas
Adhesive Guru mold release spray is an excellent choice for almost any project that involves molding material.
This release spray can be used in a wide usage area in DIY projects or handmade accessories such as wax and candle. The specialized formula ensures that your projects come out just as you want them to!
Increase Lifespan of Molds
Use resin mold release agent to prevent rips. Silicone molds tend to be fragile when used for molding projects. Using our mold release spray when creating projects can help to extend the life of your molds.
Adhesive Guru mold release, with its high quality content, ensures a long-lasting use by preventing your products from any accidents such as tearing-adhesion during separation.
lesa
2025-08-22 20:45:45
Works lika charmn why I didn't use this mini moons ago is beyond me but I absolutely love it great stuff thank you I would recommend
Kimberly Blayton
2025-08-18 18:58:51
This is so helpful when working with silicone molds
Suzanne Pribesh
2025-07-15 14:56:29
worked great
John
2025-06-16 11:42:19
All is good
Anna
2025-05-22 15:07:52
This release worked well on wood and epoxy mix. I’ll buy again. Thanks
DT C.
2024-12-21 15:14:22
If you are working with molds this is a must! I tried two silicone molds to test and the one where I used this spray released quite easy, the other one... not so much.
Mauricio Ruiz
2024-12-07 11:03:08
Llego muy rapido, bien empaquetado, igual a la descripcion, aun no lo probé. Espero funcione bien
betty
2024-11-28 12:02:37
Used on my mold tape. My project would not come out of mold.
Recommended Products