Your cart is empty.
Your cart is empty.
Item Descriptions:
-Material: Plastic, Zinc alloy, Copper; Thread diameter: 1/4PT; Max pressure: 180PSI; Max voltage: 240V.
-Durable and utility.
-Easy to install and disassemble.
-With the barometer, can be set and read the data.
-With the valve knob, can according to need to adjust air pressure.
-Can help to save electric energy.
Package:
1x Three-way Pressure Regulator
1x Connector
1x Pressure Gauge
Item Specifications:
Material:Plastic&Zinc alloy&Copper
Max Voltage:240V
Max Current:15 amp
Max Pressure:180psi, 12bar
Female Thread Dia:1/4PT
Voltage:240V
Type:Does not apply
Paint Volume:Does not apply
Bundled Kit Components:Does not apply
Primary Color:Does not apply
Warranty:Yes
Alex bernal
2025-08-11 15:55:31
Had to change The connecting tips cause they didn’t match my shops air supply . Other than that it’s a great product
Scott Manning
2025-08-06 19:10:12
Included connectors were unfamiliar to me, but I was planning to install miltons anyway. seems to work great. I have it rigged as a portable coupled to a cheap plastic recoil hose, allows me to easily control pressure when hooked to a customers air supply on a job site
Auslander
2025-07-21 15:23:37
The quick disconnect is worthlessUse your ownOtherwise it's cheap and works for what it is
Ty Pepin
2025-07-17 16:02:35
Complete Junk!! The valve has not effect on air pressure and the male connector is NOT 1/4"
Ali and Derek
2025-06-12 13:26:03
It was better quality than the OEM part that blew out. Worked as described. Fast shipping.
Matt Sullivan
2025-06-01 16:12:40
I use a lower end compressor with limited capacity. This regulator helps me optimize pressure to the spray gun, resulting in longer time with optimal pressure.
RV
2025-05-22 16:07:35
First one leaked badly but they sent me a replacement quicker that I expected. You get what you pay for. I want it only to control the air pressure in my water lines of my camper for winterizing. It worked great for this but would not use it for a daily or regular usage. Still the company stands behind it.
Nick F.
2025-05-13 14:37:50
I had to do some manipulating to both the product and my compressor but once installed, it'works just as it should.
Cliente
2025-04-18 16:42:24
Perfecto
GaLaXiS
2025-04-07 13:17:37
Montage sur un compresseur 150 Litres, le mien avait une fuite et je ne pouvais plus faire de réglage.Aucun problème rencontré lors du montage avec du ruban blanc.Sortie du compresseur après le blocs 220 > Régulateur > Anti humidité > Robinet > vers utilisation prise rapide.Test Ok
Mentor
2025-03-30 18:49:32
Klappt einwandfrei an meinem Kompressor. Hält den eingestellten Druck toptop.Super Preis Leistungsverhältnis.
Adry
2025-03-16 18:06:17
Tutto ok prodotto come da discrezione ottimo
mark davies
2025-02-12 16:35:27
Excellent product replaces my broken regulator, Of note there are no instructions but it is straightforward. Connect the inflow to the threaded opening of the the three 1/4" holes where you can see the regular spring. The included fittings are a male euro XF fit and a female euro XF fit which are the smaller type connectors. If you do not have a female connector to attach onto the male then there will be unobstructed flow from the compressor and you will not be able to build up pressure. I used a standard larger british snap fit, female connector into one threaded socket and the included smaller female connector into the final threaded socket. This allows for the compressor to build up pressure with nothing connected. Also make sure you use some PTFE tape for airtight fit but do not over tighten.
Recommended Products
$96.18
$ 43 .99 $43.99