Your cart is empty.
Your cart is empty. Air Compressor Manifold Repair Kit 105-0004
Fits For Sanborn, Craftsman, or For Coleman Powermate manifold
repair kit. If you are not sure this is the right part, feel free to
contact us at anytime!
This repair kit fits the following models and more:
Air compressor parts: 84A150, 104200, 104A200-22, 112A300,
143A400, 400A30H, 34A50, 34B50
Air compressor manifold parts: P0502010, CP0502010
Regulator parts for older belt driven units
Parts: 64BL100, 64BL150, 89BL200, P0302013, P3001113,
P0502013, P0502513
Thomas
August 24, 2025
I'm sure it works good but cap blew off and blew out the internal parts. Never got to use it.I recovered all but the ball. Any idea what the diameter of the ball is and where to get just that?
Dave
July 26, 2025
Got what I needed but the part that was installed above the check ball was a little tough to install. The plastic was on the soft side which deformed while installing. It worked well.
Otto
July 20, 2025
I placed 2 orders, 1 for a spare. Upon inspection I found on 1 part a tiny O ring is missing. I would not have noticed it if I did not have the 2nd order. Any chance of getting the small black plastic piece with the O ring attached like on the second order? Thanks
Customer
July 19, 2025
Struggled a lot to get part with threads installed. Finally took o-ring out and installed a different, smaller o-ring that I had in my own parts. Hopefully it doesn’t leak but would not fit with theirs on.
Top was 4 inches short
July 9, 2025
Worked for a few minutes until the adjustment know blew off. Now can't find the parts
Evan
June 19, 2025
If you are looking for a quality product, DO NOT buy thIS P.O.S. The o'rings don't fit, and the center disc is not machined to keep it's o'ring in place! My regulator leaks bottle than before! Definitely a waste of time and money!!
Keith dietz
June 11, 2025
Here is it on my air compressor mom was Boston put it in there works great
Dan P
May 8, 2025
loved it.
Ken
May 7, 2025
Item as described. Extremely prompt delivery (item was delivered 4 days faster than original quoted delivery date). Very good seller, and happy buyer.
Jacques
April 18, 2025
Bonnes pièced
Don B
April 15, 2025
Tried this kit for my 5hp Sanborn 20 gallon compressor. In short the only part which works is the o ring! The two nylon and brass diaphragms were identical in all measurements when I checked using a caliper. Neither of them matched the OEM one which has the brass portion with about a 1/4†more stick out than the ones in this kit. Maybe they messed up as either the black one or white one in the kit was supposed to be a match for the OEM one but this was not so so the parts are unusable. The rubber ball and small plastic insert didn’t fit in the OEM housing either. Probably because the threads are crappy. I also noticed the OEM insert had a nice bevelfor the rubber ball to nest into. The one in the kit is just a crappy rough edged hole. So I ended up only using the o ring…at least that worked. Thankfully my OEM parts still worked.
Jon
March 27, 2025
Parts fit my regulator valve perfectly
Robert Davis
February 13, 2025
Good value
Recommended Products
