Your cart is empty.
Your cart is empty.Product Description
Cycling Benefits and Gifts
Cycling is an aerobic exercise with a wealth of benefits. It can help us to have a good healthy way. While our bike quick release axle is mainly used for wheel fixing, the bike quick release is mainly used for disassembly, making it the perfect gift for cyclists.
Bicycle Axles
Usually the axels fit 20" 22" 24" 26" 28" bike, work on a 6 7 8 speed road bike, durable and extra hard dustproof cap.
Bike Quick Release Springs
The purpose of quick release springs is to make installation and remove springs faster, saving installation costs and increasing efficiency.
Bicycle Quick Release Handle
This handle has a pivot that goes through a hole in the head of the quick release lever, and the handle can swing relative to the lever.
Size:
The short release lever for front wheel, hollow shaft size: approx.11cm / 4.33in, quick release: approx.16cm / 6.3in.
The long release lever for the rear wheel, hollow shaft size: approx. 14.5cm / 5.7in, quick release: approx. 19cm / 7.48in.
More Descriptions:
Characteristics :Road Mountain Bicycle parts are made of Carbon Steel, durable and practical for most bikes.
Weight: approx. 255g / 8.99oz
Color: black
Edward Cazenave
2025-08-28 10:39:29
This comes with two quick release. I only need one for my Front wheel held up on my motorbike I don’t wanna use it on the back tire because the back wheel is worth well over 200 bucks and someone might steal it but just in case I haven’t tried the axles because I haven’t needed a new ones but for someone who wants all of these things it’s a good product for a good price I didn’t buy this on prime day
Josh
2025-08-04 16:33:18
I broke my old rear axle and ordered this set to fix it. The bearing cone on the cassette side of this axle was different from the one in the bike, but the original from the bike threaded on with no problem, I was able to use parts from this kit for the other end. It was possible to remove and install the axle without removing the cassette on my bike, others may require a cassette wrench and chain whip to get it apart. You will also require axle grease.When my axle broke, it also bent the derailleur hanger a tad and caused the derailleur to ding against the spokes in the lowest gear and the shifting was awful. I tweaked it back to a position where it worked with an adjustable wrench and it worked properly without having to re-adjust the derailleur. After that it rode like a new bike!
july1953-us
2025-07-28 11:28:20
This tool is a must have when space is limited to store the bike take front wheel off without any tools and remount wheel without any hassle.
Extreme Animators dot com
2025-07-06 11:52:25
These are high-quality iron and pre-oiled. Install with no worries for a while.
Mike G H
2025-06-23 16:24:30
Didn't fit. I kept them because they were cheap. I think the fit is as much based on ball bearing size as anything else. I tried these on a Shimano hub 26" wheel and no go. Doesn't mean it won't work for you but not for me. If I find another application I'll try again.UPDATE I ended up using these on a wheel and it worked. Again. I think these may be less universal and more "these may work" but I'm upgrading stars to reflect positive use.
Tomas
2025-06-22 12:19:28
This axle is an M10 1.0 thread size, so I was able to reuse the original cones.
Dan Henson
2025-06-19 15:00:16
Spent time to replace the broken rear axle on a Giant mountain bike. Got everything changed out and ready to mount on the bike. Tried to slide the quick release which came with the axle into the axle and it would only go in about 1/3 of the way. Tried from the other side, it wouldn't go at all. After inspecting the axle the hollow inside for the quick release was only machined about 1/3 of the way through. The front axle was good all the way through. Didn't want to waste time on a replacement part that was defective. Not very happy now I have to wait on another axle..
guillermo
2025-06-14 16:37:19
bought them for my 1980 shwinn bike which had the standard 15mm nut .bought this product to convert the wheels into quick release when travelling and needed to take my wheels off the frame or if a flat occured easier to change tubes
didier
2025-05-14 18:09:07
super pièce qui ma sauver la mise , car introuvable en magasin , vélo sauver.
Henry dionisio
2025-02-05 20:15:55
The quality is great and the material is not cheap. Its a good one.
Pax
2025-02-03 11:08:43
It's a good and quality kit, put these on my mtb 3 months ago and it's lasting well, I do deliveroo every evening and my bike's eletric, so it see a lot of work and wear.It's worth the price !!
Keith Pearson Alarie
2025-01-05 14:42:36
Perfect
Shinbey
2024-12-13 13:10:09
組立ã¦æˆåŠŸã€ç„¡äº‹ã«èµ°ã‚Šã¾ã—ãŸã€‚二é‡ä¸¸
Recommended Products