Your cart is empty.
Your cart is empty.
This listing features one pair (2 pieces) super extremely super bright festoon led lights bulbs high power 3030 9-SMD led bulbs 44mm(1.73 inch) especially designed for auto cars' interior festoon map lights, dome lights, interior door lights, step courtesy lights, dashboard lights, trunk/cargo area room lights, parking lights, city lights, reading lights,etc..
Specification
1) Package: including 2pc 44mm super bright white 3030 SMD Led bulbs.
2) Easy Installation: just plug & play for most vehicles, non-polarity. Up to 50,000 hours.
3) LED Chips: 9 piece high power 3030 SMD per led bulb.
4) Direct replacement for all 561, 562, 563,567, 564, 566, 570, etc.
5) Warranty: “ONE Year” guaranteed on manufacturer quality
6) Please note: This bulb is CAN-BUS error free, it can work on 98% cars including Japanese & European cars without issues, just plug and play, but for some cars, it still happen hyper blinking, just please feel free to contact us, we will figure out the solutions for you, no worry about it.
Stephen A Warren
2025-08-28 16:58:46
If you have the original bulbs. GET THESE. The improvement is stupendous! Literally night and day. Only thing is, if you have a 95 Cherokee, expect them NOT to be a perfect fit. BUT. Bend the ends just a little, and you are good to go. Use a needle nose plyers and be very careful to ONLY torque the wire ends. These do not bend easily. Just saying, if you aren't careful, you COULD crack the circuit board. And... That ain't good. Anyway, don't try bending these by hand, because it is hard to get the right amount of pressure to bend these. Needle nose plyer, just bending the last couple of mm to shorten the length just a little, worked perfect for me. So... Only four stats for ease of install because I had to bend it.
Andrea
2025-08-13 14:06:41
I was a bit wary of some of the reviews stating this was not a good replacement bulb for my 95 Jeep Cherokee. A couple of other reviews said that all you need is a pair of needle nose pliers and a bit of bending on the end loop wires and you’re good to go. That was definitely the case for me. The bulb would have never fit unless I bent the end loops up just a touch. Perfect fit now and they’re nice and bright! Very happy with them.
Chuck R
2025-08-09 10:47:55
Lights work great but the first ones never came and second package was opened
Dustin
2025-08-02 12:55:34
It’s very bright at night. It’s just what I wanted
Featherhead
2025-07-22 11:16:09
I ordered this set of two replacement “festoon†lamps (still haven’t figured out what a festoon is) for my Corvette’s floor courtesy light fixtures and couldn’t be happier. Very bright and white just the way I hoped. This particular make of light is a little more sophisticated than your typical multi-chip assembly of LEDs as it contains a smart voltage controlling circuit that is not polarity sensitive or voltage sensitive, meaning, they won’t flicker with vehicle voltage fluctuations and they can be installed in the fixture with no regard to direction. They will always work, no “50-50†chance that you installed it correctly. I just ordered two more - one as a spare and one that I do need to modify with new end loops so I can aim the chips 90° away from the supplied orientation. Easy mod for me to perform.
Dani v
2025-06-29 15:51:28
Tried to use these "festoon" bulbs in a '96 Jeep Cherokee (XJ) dome lights and they didn't fit properly. The loops at the end were the wrong distance from the electrical prongs and needed some bending. Unfortunately, trying to bend one of the bulb loops to fit the dome light resulted in it snapping and breaking. Oh well, they were cheap.For the one that did get put in, it gives off brighter, whiter light than the regular incandescent bulb.
Jody
2025-06-26 15:03:42
I liked the design, the fit and the price. I would like to make a suggestion though. The way the clips that hold the front and rear bulbs in the lights, the light is not positioned facing the lens properly. The wire ends should either be twisted to accommodate or made in a tube shape with chips all around the board so it wouldn't matter the direction it's facing. I only say this because you lose a little light. They are very bright though.
Stephen A Warren
2025-06-19 18:02:37
If you have the original bulbs. GET THESE. The improvement is stupendous! Literally night and day. Only thing is, if you have a 95 Cherokee, expect them NOT to be a perfect fit. BUT. Bend the ends just a little, and you are good to go. Use a needle nose plyers and be very careful to ONLY torque the wire ends. These do not bend easily. Just saying, if you aren't careful, you COULD crack the circuit board. And... That ain't good. Anyway, don't try bending these by hand, because it is hard to get the right amount of pressure to bend these. Needle nose plyer, just bending the last couple of mm to shorten the length just a little, worked perfect for me. So... Only four stats for ease of install because I had to bend it.
Andrea
2025-06-14 21:09:17
I was a bit wary of some of the reviews stating this was not a good replacement bulb for my 95 Jeep Cherokee. A couple of other reviews said that all you need is a pair of needle nose pliers and a bit of bending on the end loop wires and you’re good to go. That was definitely the case for me. The bulb would have never fit unless I bent the end loops up just a touch. Perfect fit now and they’re nice and bright! Very happy with them.
Chuck R
2025-06-10 17:06:53
Lights work great but the first ones never came and second package was opened
Dustin
2025-05-20 16:07:08
It’s very bright at night. It’s just what I wanted
Featherhead
2025-05-17 15:07:29
I ordered this set of two replacement “festoon†lamps (still haven’t figured out what a festoon is) for my Corvette’s floor courtesy light fixtures and couldn’t be happier. Very bright and white just the way I hoped. This particular make of light is a little more sophisticated than your typical multi-chip assembly of LEDs as it contains a smart voltage controlling circuit that is not polarity sensitive or voltage sensitive, meaning, they won’t flicker with vehicle voltage fluctuations and they can be installed in the fixture with no regard to direction. They will always work, no “50-50†chance that you installed it correctly. I just ordered two more - one as a spare and one that I do need to modify with new end loops so I can aim the chips 90° away from the supplied orientation. Easy mod for me to perform.
Dani v
2025-05-04 18:49:45
Tried to use these "festoon" bulbs in a '96 Jeep Cherokee (XJ) dome lights and they didn't fit properly. The loops at the end were the wrong distance from the electrical prongs and needed some bending. Unfortunately, trying to bend one of the bulb loops to fit the dome light resulted in it snapping and breaking. Oh well, they were cheap.For the one that did get put in, it gives off brighter, whiter light than the regular incandescent bulb.
Jody
2025-04-19 15:41:11
I liked the design, the fit and the price. I would like to make a suggestion though. The way the clips that hold the front and rear bulbs in the lights, the light is not positioned facing the lens properly. The wire ends should either be twisted to accommodate or made in a tube shape with chips all around the board so it wouldn't matter the direction it's facing. I only say this because you lose a little light. They are very bright though.
Customer
2025-03-31 17:38:34
Easily twice as bright as stock dome light.
Matthew Osborne
2025-03-23 18:43:38
The inside of my car is so bright. It looks like I upgraded to a 2022 model it’s amazing. The light buzzes a little but I think it has to do with my car my old one made a humming sound too but it doesn’t bug me.
Customer
2025-03-09 14:32:48
Easily twice as bright as stock dome light.
Matthew Osborne
2025-02-19 11:34:01
The inside of my car is so bright. It looks like I upgraded to a 2022 model it’s amazing. The light buzzes a little but I think it has to do with my car my old one made a humming sound too but it doesn’t bug me.
Recommended Products
