Your cart is empty.
Your cart is empty.Product Description
Karen Alexander
2025-09-02 19:43:10
We had an older snowboard that was unkindly relegated to the corner of the garage. Newer boards have taken his place on the mountain but not in our hearts. This was just the product to bring Ol' Tucker out in the open and display the bad boy. The brackets are sturdy and do the job. We were able to use a stud and screws on one side and the drywall anchors worked fine on the other side. no problems.
Dylan
2025-08-20 15:48:53
works amazing, holds my board on the wall off season, best bang for your buck
elpres
2025-08-16 16:25:56
Okay, so yes.. it's not a snowboard but it was almost perfect for what I needed.. I say almost, as I made my own little foam wedges to help hold it at the angle I wanted. But as for the mounts themselves, they're great and still holding.My Cayman is undergoing some fabrication and it's easier to put the deck lid into service position without the GT3 wing on the car. Plus carbon fiber looks cool and looks better not all scratched up haha. So just an idea for others 🤙ðŸ½
haelyn Larson
2025-08-11 09:47:37
I bought this to hold by the snowboard and it has not fallen so that’s good lol it has foam on the edges to keep your snowboard edges good I love it
Minh Nguyen
2025-08-08 17:13:45
Was getting ready to mount and was using the supplied hardware. Upon finalizing mount points, the head of the nail snapped from the stem. Cheap hardware.
Connor Schultz
2025-07-22 11:16:12
Holds my Salomon Sight 162W up fine. Doesn’t have the bindings on it rn, will update when winter hits and I’m actually using it and don’t feel like taking the bindings off when storing.
warblegarble
2025-07-12 15:48:06
Bottom screw holes are problematic for most drills / screwdrivers. The forward-most part of the shelf bracket blocks the bottom mounting hole for most tools. You will need a 90 degree screwdriver, or a very stubby screwdriver I have one bracket mounted in a stud, and the other in the provided anchors. It seems to hold the weight of a board & bindings just fine. I hung some additional weight (boots, helmet, goggles) on the stud side without issues.
Arun Verma
2025-07-11 13:16:41
I bought this needing a place to store my board in the off season as I didn't want it in the bag because I spent a lot of money on it. I wanted to show off the design even when i'm not the slope because arbors designs have always been super cool. When I opened the box everything was normal and everything displayed on the listing was in the box. I know why people claim it's not aluminum because it's a light metal but certainly not plastic. I am totally fine with the hangars themselves, what i'm not fine with is the hardware included. I tried stud mounting and every screw I used broke off and left a piece of screw jutting out of my wall. I had to end up dry wall mounting and with my own hardware which I trust and use for hanging anything on my walls. My suggestion for you if you'd like to keep your wall as clean as possible is to invest in good quality metal drywall hardware or screws and then mount. Other than that I am satisfied with the finished product but not enough to give this 5 stars.
Karen Alexander
2025-07-06 18:43:58
We had an older snowboard that was unkindly relegated to the corner of the garage. Newer boards have taken his place on the mountain but not in our hearts. This was just the product to bring Ol' Tucker out in the open and display the bad boy. The brackets are sturdy and do the job. We were able to use a stud and screws on one side and the drywall anchors worked fine on the other side. no problems.
Dylan
2025-07-03 16:05:49
works amazing, holds my board on the wall off season, best bang for your buck
elpres
2025-06-02 10:29:29
Okay, so yes.. it's not a snowboard but it was almost perfect for what I needed.. I say almost, as I made my own little foam wedges to help hold it at the angle I wanted. But as for the mounts themselves, they're great and still holding.My Cayman is undergoing some fabrication and it's easier to put the deck lid into service position without the GT3 wing on the car. Plus carbon fiber looks cool and looks better not all scratched up haha. So just an idea for others 🤙ðŸ½
haelyn Larson
2025-05-06 15:19:42
I bought this to hold by the snowboard and it has not fallen so that’s good lol it has foam on the edges to keep your snowboard edges good I love it
Minh Nguyen
2025-03-15 12:43:39
Was getting ready to mount and was using the supplied hardware. Upon finalizing mount points, the head of the nail snapped from the stem. Cheap hardware.
Connor Schultz
2025-02-22 15:36:39
Holds my Salomon Sight 162W up fine. Doesn’t have the bindings on it rn, will update when winter hits and I’m actually using it and don’t feel like taking the bindings off when storing.
warblegarble
2025-02-03 15:06:24
Bottom screw holes are problematic for most drills / screwdrivers. The forward-most part of the shelf bracket blocks the bottom mounting hole for most tools. You will need a 90 degree screwdriver, or a very stubby screwdriver I have one bracket mounted in a stud, and the other in the provided anchors. It seems to hold the weight of a board & bindings just fine. I hung some additional weight (boots, helmet, goggles) on the stud side without issues.
Arun Verma
2025-01-23 21:11:12
I bought this needing a place to store my board in the off season as I didn't want it in the bag because I spent a lot of money on it. I wanted to show off the design even when i'm not the slope because arbors designs have always been super cool. When I opened the box everything was normal and everything displayed on the listing was in the box. I know why people claim it's not aluminum because it's a light metal but certainly not plastic. I am totally fine with the hangars themselves, what i'm not fine with is the hardware included. I tried stud mounting and every screw I used broke off and left a piece of screw jutting out of my wall. I had to end up dry wall mounting and with my own hardware which I trust and use for hanging anything on my walls. My suggestion for you if you'd like to keep your wall as clean as possible is to invest in good quality metal drywall hardware or screws and then mount. Other than that I am satisfied with the finished product but not enough to give this 5 stars.
Recommended Products
$79.99
$ 32 .99 $32.99