Shopping Cart

Your cart is empty.

Your cart is empty.

Aluminum Crimping Loop Sleeve for 1/8' Diameter Wire Rope and Cable, (Pack of 100)

Free shipping on orders over $29.99

$8.98

$ 4 .99 $4.99

In Stock

About this item

  • Fit for for steel wire rope diameter in 3.2 mm/ 1/8 inch.
  • Easy to use: Aluminum crimping loop sleeves are easy to use, without effort, just lock both ends of the guide wire by vise, pliers or compression tools.
  • Working indoors or outdoors both are fine, even in a high salt environment as it’s made of aluminum.
  • These crimping sleeves fit for dog leashes, clothes lines or anything else that require strong cable, can meet your different needs in daily life.
  • They are great to work on 1/8" stainless steel cable array for deck railing, properly crimped it will support 200lb load.


Loop/Sleeve Cable Connectors make it easy to secure loops when anchoring cable and they can be compressed by vise, pliers, or with a compression tool. It is suggested that the anchoring pin be at least five times the diameter of the cable and that the connector be set at a distance from the pin equal to 2.5 times the diameter of the pin. We stock sizes for cable diameters 1/16 inch or greater, plus 0.037 inches in zinc plated copper and 0.024 inches in brass for securing very fine cables.


Alan Bean
2025-08-29 12:53:01
Works as expected.
Joshua
2025-07-27 14:47:43
Are you really reading a review for a $.5 Aluminum cable connector? Have you had a bad batch before? What exactly are you looking for? They are aluminum or Lead or God only knows what but you can smash them with a hammer and then they keep your cable connected for a while. In fact I’ve never had them fail so they must be pretty good. If you’re still reading this review, you probably don’t need to buy these. You shouldn’t be trusted with tools or cable or a drivers license.
Jacob
2025-06-30 13:21:08
Very impressed with the strength of these crimps, I would recommend doing the loop that you twist the tail end around to put more friction on the cable itself than the crimp in any situations you need a loop though.
Larry A. Mitchel
2025-06-21 14:08:30
I first balked at using these crimped sleeves -- because the crimping tool is so pricey! So I used little U-clamps instead. They work.But on consideration, and seeing another bunch of projects on the horizon, I sprung for the crimping tool and am now glad I did. These make a much cleaner installation. [I also use the little ferrules - see pic - but they are difficult to hold in place (with one hand) whilst operating the crimping tool (2 hands). If I only had three hands! I started using masking tape to hold the ferrule in place while I applied the close-in ferrule.]
Brad Ballard
2025-01-23 12:28:09
Soft aluminium allows any vice or clamping device. Special crimping tool is convenient for volume use but not neeeded; I used a six inch bench vice and two framing nails.
Rsavoie
2024-12-31 14:30:30
Quality sleeves for the price.
Michelle Ainslie
2024-11-18 17:53:11
Exactly how described and expected
Twizzler87
2024-11-14 15:31:07
After running the cable through no matter what I couldn't crimp the tiny things