Your cart is empty.
Your cart is empty.Product Description
James Richters
2025-09-01 12:26:55
I have two 40 foot marine containers, and to control the humidity in them I have installed dehumidifiers with pumps to pump out the water. The Dehumidifiers came with some plastic tubing, and that worked great... for a little while... until some animal discovered that nice cold water was coming from that tube. It chewed up the end of the tube probably trying to get more water and eventually mangled it up so badly that it was leaking inside the container... where I was trying to get rid of it!! I obviously needed something a bit more resistant to the critters. So, I got this aluminum tubing, it's larger than the plastic tubing so I can just slide it over the plastic tubing at the end where it exits the containers. It's easy to bend and should be a lot stronger than plastic. It's not a big deal that they chew up the ends... it's that they pull one it enough that it eventually wears a hole in the side where its rubbing against the metal, having a metal tube going through the metal container should last a lot longer.I found this tubing every easy to cut with a small tube cutter, and it was very easy to unroll from the roll and curl into the new shape I wanted. I'm very happy with how easy it was to use and I'm confident it will work better than the plastic tubing alone.
Phil
2025-07-19 13:35:06
This tubing is as described. It's easy to bend and form; and holds its new shape well. Much easier to work with than steel, and cheaper than copper.
Pablo Gatos
2025-04-22 10:50:18
Now, it worthy of note,beforewith words that that this will bloat,Its really not hard do,make an aluminum tube, and make it true.Theres no moving parts,no false starts,no broken hearts,no sour tarts,In fact, not really much upside either.noone is going to remember your brand,or take a stand,In fact there's only downside...and a downhill slope to ride.That being said,the tube works like it should,which is to say, "good."
Otis
2025-03-26 09:14:19
It is difficult to get excited about metal tubing, but this is consistently formed and a sturdy thickness. Worked well for my project so far, so giving it high marks.
natevw
2025-02-08 16:44:31
I received aluminum in tube form 👠Can't vouch for the exact alloy… I'm mostly planning on making antennas with it so my use might not be as particular regarding the exact metal or tube diameter and such. But it seems to be of good quality.
Addington
2025-01-22 14:00:22
Arrived in well packaged and in perfect condition. Straightens by hand, easily bent with a tubing bender when precision is required. I used it to plumb a PCV valve on an engine, the aluminum polishes easily with Mother's Aluminum polish and a rag. Remember to clean the inside of the tube before plumbing into your application. No regrets, this tubing does the job well.
RogueGalaxie
2025-01-04 16:11:46
Good tube but can’t bend tight radiuses without it kinking. Most I could get was a 45 degree bend before it started flattening out. First time using aluminum over copper so this may be the norm.
Recommended Products
$54.30
$ 26 .99 $26.99