Your cart is empty.
Your cart is empty.Product Description
It is Aftermarket Black Shift Linkage Compatible for Harley Davidson Softail (except for FXBB, FXLR, and FXLRS 18-later ), Street Glide , Road Glide , Road King , Electra Glide , Touring and Trike models 1986-later
Attention:
All parts are shown in picture! Please check it carefully.
Please check your motorcycle’s model and confirm compatibility of this item before ordering.
Professional installation is highly recommended.
Fitment:
Aftermarket shift linkage compatible for Harley Davidson 1986-later Touring ,Softail (except ’18-later FXBB and FXLR), and Trikes models.
NOT fit ‘97-’99 FLSTS or models equipped with Softail Extended Reach Forward Controls.
Compatible for Harley Davidson Bad Boy 1995-1997
Compatible for Harley Davidson Blackline 2011-later
Compatible for Harley Davidson Breakout 2013-later
Compatible for Harley Davidson CVO 2014-later
Compatible for Harley Davidson CVO Road Glide 2018-later
Compatible for Harley Davidson Dyna 1983-later
Compatible for Harley Davidson Electra Glide 1980-later
Compatible for Harley Davidson Electra Glide Low 2015-later
Compatible for Harley Davidson Fatboy 1991-later
Compatible for Harley Davidson Fatboy Lo 2010-later
Compatible for Harley Davidson Heritage Softail 1986-later
Compatible for Harley Davidson Night Train 1999-2009
Compatible for Harley Davidson Road Glide 1998-later
Compatible for Harley Davidson Road King 1994-later(except 95’)
Compatible for Harley Davidson Softail 1984-later
Compatible for Harley Davidson Softail Springer 1988-2009
Compatible for Harley Davidson Street Glide 2006-later
Compatible for Harley Davidson Tour Glide 1980-1996
Compatible for Harley Davidson Tri Glide 2009-later
Made of high quality billet aluminum and durable
This shifter rod can tighten up your shifting makes your bike shifts much better
Come with necessary mounting bolts,easy to install
Accountable3
2025-08-09 18:07:05
Good looking and very functions shift linkage. Easy install, matched adjustable length to OEM shift rod and bolted to original shift levers. Firm shifts and like the Heim joints for secure pivots.
Jacob E.
2025-08-01 11:42:13
I used this on my 2006 Fatboy to replace the stock linkage with worn joints. It looks great on the bike and the heim joints make a noticable difference over the factory ball joint type. For this price it's a solid upgrade. Installation was fairly smooth, I recommend removing the stock linkage and adjusting the heim joints on this one until it drops onto the studs squarely on the original. This will almost eliminate any need to adjust after it's installed as long as your shifter position was where you like it originally. Almost goes without saying to use thread locker on just about anything threaded you wouldn't want to lose on a H-D. My one little issue is that the bolts in the kit aren't super great, one of mine had some minor damage to some threads so it was a little rough threading into the nut.
Ron
2025-07-03 16:49:52
Better than I expected for this price. Chrome looks good and edges and holes are rounded off. Quality ends and hardware. Looks great on my bike. I hate buying stuff made in China but didn't want to spend $100 on a shift rod either. I added blue locktite on the bolts to keep safe. Came with nice chrome acorn nits and trans shift lever cover too.
Steven
2025-06-26 15:05:18
Easy to install / adjust. Looks fantastic at this point; time will tell with regards to durability. Great value for $$$!
Ryan Tidwell
2025-06-25 15:51:22
Stock one had a lot of sloppy feel. This linkage you get the same qualities of the pricier ones. Super solid feel and adjustment is nice.
Killy03
2025-05-02 19:01:09
Great looking piece at a great price.
The Finisher
2025-03-11 17:11:57
Like everything else in the world, things are failing. So before my OEM shifter linkage failed leaving me stranded, I thought to upgrade it. I’m not into skulls and twisted chrome components, but this linkage was simple enough and had a nice semi custom look to enhance the old bagger. Can’t beat the price, shipping was quick and it actually looks pretty nice. And now I can keep the original in the saddle bag for someone else stranded or if by some chance I do need it on the road, I’ll have it.
Charles J.
2025-03-10 17:38:22
It’s too short for Harley Davidson V twin. I had to order a extension
Customer
2025-02-28 12:25:09
Lovely quality product. All the hardware needed including a nice cap for the arm into the gear case.
Stuart Blair
2025-01-29 11:28:50
They say it’s not if the shift linkage will fail, it’s when This is a well made piece that will be a welcome upgrade to any H-D. Just line up the new one the the exact length of the new. 10 min job.
Bob
2025-01-22 12:42:15
Went straight on my boy's Heritage, would prefer stainless nuts and bolts with it.
Riz
2025-01-17 11:33:06
Well decided to change the gear shift leverage. So far the rod looks good and seems to be sturdy. My only issue is that the black screws /bolts appeared to have the signs of the beginnings of rust. Luckily for me I had proper ones in my Arsenal. Took only 25 minutes to install cause the proper tools were available.
ãã‚“
2024-12-17 15:24:51
充分使ãˆã¾ã™ï¼
Recommended Products
$18.50
$ 8 .99 $8.99