Your cart is empty.
Your cart is empty.Product Description
Kyu Lee
2025-08-26 17:57:28
The pieces of the pole interlock very well, no looseness or tightness. It sets up very quickly. The best feature is that the flag won't end up wrapped around the pole on windy days. It simply spins and drapes back to the same exact position.
happy grandpa
2025-06-14 11:01:13
The flag is very good. It came quickly with no problems. The pole is easy to assemble and the clips that attach the flag to the rotating rings that go on the pole were excellent. The rotating rings themselves are really nice as they are ball bearing rings that so far have stopped the flag from getting wrapped up on itself. They keep the flag rotating properly.
Marcie A.
2025-06-08 11:56:12
This is a quality product. We ordered one from another vendor 1st and it was NOT good quality.
gmthompson
2025-05-20 16:19:17
Very nice flag and sturdy bracket and pole. I would have given it a 5 star but one of the swivel clips on the pole has a crack. I will pick one up locally.
Meandering Minstrel
2025-02-27 11:39:35
It doesn't get tangled and was fairly easy to install. The flag itself is of very decent quality and seems to be well-made.All it needs is built-in LED lights for when I forget to take it down before dark!!
Rowdythunder
2025-02-07 14:14:30
Absolutely gorgeous. Love the metal and chrome look. Very classy. Flag is very nice. Proud to display this 20 year Air Force retired veteran
ccproductions
2025-01-06 10:50:59
its is a good flag do not get me wrong and I would purchase it again if I need another. However, the setup needs to be fixed. It was slightly hard to install and there were no instructions and There were things inside the stand that kept the pole from going in. Then if you removed all the pieces the flag was very unstable. The Smaller pipe stays inside. Flag was of good quality and this will be an inside flag so I do not see an issue with durability.
Harry Miller
2024-12-18 17:42:02
Usually, I don't write about products. However, my experience with this one must be shared. 1. As soon as I unpacked it, I suspected problems. The Led light wire feed comes directly out of the bottom of the shaft/pole. This is a grave engineering error. One has to take the pole mounting bracket and figure out how the wire will pass through the bottom of the bracket without it getting kinked. There is no way except to build another mounting bracket and drill a hole through it to get the wire to feed through the new base, so it does not kink in their scheme. I so did. I have the wire through the second bracket the customer must fabricate. 2. Then one can only guess when it lights up as there is no means to set a timer. My pic in the darkness shows the flag lite up. The flag is only illuminated by the porch light. Not the LED strip light. With the porch light out all one sees is a LED light which does not light the flag. Note pic 4 shows the minimal light that gets to the flag, and the real light comes from the porch light. I could have lived with all this nonsense, but the poor engineering was not fully manifested. 3. A gust of wind came along, and the shaft bent. Note pics 1 and 3 show the bend in the shaft/pole. Pic 2 shows the flag lit up, but that is because of the combination of the camera flash and the porch light. Not the LED lights one expects to illuminate. Thus, $50.00 plus is down the drain. It's a great idea, but not if horribly engineered as this product evidences. I would have return it, but by the time I finally got it up after trying to reengineer it I had passed that window. Save yourself $50 plus and pass on this headache.
Recommended Products