Your cart is empty.
Your cart is empty.Product Description
This item is a american standard 0321.026.020 declyn 4-inch centerset wall mount sink, white . Purpose of use for plumbing fixtures, bath faucets and accessories. This product is manufactured in mexico.
From the Manufacturer
The American Standard Declyn Vitreous China Wall-Mount Lavatory Sink is designed with rear overflow. It comes with the wall hanger, integral faucet ledge and includes a soap depression. The sink is designed for faucet holes on 4" centers. Sink Dimensions: 19" x 17"; Bowl Sizes: 14-1/4" wide, 10-3/4" front-to-back, and 6" deep.
Grandpa Dan
August 20, 2025
Fits and looks great!Fast and easy install, no problem!
Preferred Customer
August 18, 2025
If you need a small sink that doesn't stick out very far, this one is great. Its a basic functional sink at a good price, nothing fancy...but it works and installed easily.
GoneFor Good
July 31, 2025
The sink is perfect, very nice finish and build.
Alien Bitflipper
July 30, 2025
This sink was a "drop in" replacement for a 50 year old version of the same sink. The old sink had a rectangular overflow and a tiny center hole for the drain mechanism that was too small for a modern three hole faucet. It was not necessary to change the old bracket. The old sink came off by disconnecting the plumbing and then wiggling while pulling up at the back (there were no screws through the porcelain).Glazing on this sink was not completely uniform on top, mainly due to some surface irregularities on the top. Quality was about 15 to 20 percent lower than the sink it replaced, which was still useable after 50 years - good enough. For the money, this is an excellent wash-up station or "gas station lavatory" type sink. Modern 1-1/4" drain hardware and typical three hole faucet hardware fit fine with no leaks or mechanical issues.If installing this, it would be a good idea to avoid putting the tile and grout (if any) above the sink top in the rear in a manner that prevents the sink from sliding up for removal. The people that installed the 50 year old sink of the same type grouted and tiled the siink in place, so we had to remove the tile to allow the old sink to come off.We had to replace the shut off valves and snake the wall drain, if this is your first time dealing with it, you might want to check those items and of course measure the trap setup. Penetrating oil is good to put on the fittings the night before taking it all apart. We had to get the valves at a hardware store, but all went well.
Mikey D.
July 28, 2025
We needed a wall mount sink to replace the old, stained, etched sink in the men's room at our church building. The sink purchased was an inexpensive direct replacement for the old one. The price was very reasonable and the quality was very good. One word of warning though: be very careful when installing screws in the two holes at the base of the sink unit. It would not take much over-torquing of the screws to damage the porcelain (we came close, but caught ourselves in time).
Charlotte, CA
July 22, 2025
Needed to replace existing wall-mount basin and this one fit perfectly.
pugh
July 20, 2025
Bought two sinks. They are simple to install and sleek in style. Was missing a part in the box and figured it would be such a headache to get that. Contacted seller and problem was solved very quickly. !
Hearn
July 11, 2025
My wall thickness was less than 4inches and this sink couldn't be mounted because it was too heavy to sustain its weight and, secondmy wall was made out of drywall and there was no screws available to mount it ..Your wall needs at least 10inch thickness to mount it.I just keep it in my storage.
JD
June 29, 2025
I used this for a wheelchair accessible apartment. It installed easily and has had zero issues after 1 year.It looks a bit more commercial than I would have opted for otherwise but the price sold me on it and I have no regrets
P. Harling
June 24, 2025
Good quality. I used it in an office washroom. The mounting system is intelligent and functional. I needed a wall mount for the wheelchair clearance to keep city hall happy. It feels solid against the drywall. A standard faucet and pop-up drain fit easily and doesn't leak.
Grandpa Dan
June 21, 2025
Fits and looks great!Fast and easy install, no problem!
Preferred Customer
June 9, 2025
If you need a small sink that doesn't stick out very far, this one is great. Its a basic functional sink at a good price, nothing fancy...but it works and installed easily.
GoneFor Good
June 9, 2025
The sink is perfect, very nice finish and build.
Alien Bitflipper
May 29, 2025
This sink was a "drop in" replacement for a 50 year old version of the same sink. The old sink had a rectangular overflow and a tiny center hole for the drain mechanism that was too small for a modern three hole faucet. It was not necessary to change the old bracket. The old sink came off by disconnecting the plumbing and then wiggling while pulling up at the back (there were no screws through the porcelain).Glazing on this sink was not completely uniform on top, mainly due to some surface irregularities on the top. Quality was about 15 to 20 percent lower than the sink it replaced, which was still useable after 50 years - good enough. For the money, this is an excellent wash-up station or "gas station lavatory" type sink. Modern 1-1/4" drain hardware and typical three hole faucet hardware fit fine with no leaks or mechanical issues.If installing this, it would be a good idea to avoid putting the tile and grout (if any) above the sink top in the rear in a manner that prevents the sink from sliding up for removal. The people that installed the 50 year old sink of the same type grouted and tiled the siink in place, so we had to remove the tile to allow the old sink to come off.We had to replace the shut off valves and snake the wall drain, if this is your first time dealing with it, you might want to check those items and of course measure the trap setup. Penetrating oil is good to put on the fittings the night before taking it all apart. We had to get the valves at a hardware store, but all went well.
Mikey D.
May 27, 2025
We needed a wall mount sink to replace the old, stained, etched sink in the men's room at our church building. The sink purchased was an inexpensive direct replacement for the old one. The price was very reasonable and the quality was very good. One word of warning though: be very careful when installing screws in the two holes at the base of the sink unit. It would not take much over-torquing of the screws to damage the porcelain (we came close, but caught ourselves in time).
Charlotte, CA
May 20, 2025
Needed to replace existing wall-mount basin and this one fit perfectly.
pugh
May 11, 2025
Bought two sinks. They are simple to install and sleek in style. Was missing a part in the box and figured it would be such a headache to get that. Contacted seller and problem was solved very quickly. !
Hearn
April 20, 2025
My wall thickness was less than 4inches and this sink couldn't be mounted because it was too heavy to sustain its weight and, secondmy wall was made out of drywall and there was no screws available to mount it ..Your wall needs at least 10inch thickness to mount it.I just keep it in my storage.
JD
April 12, 2025
I used this for a wheelchair accessible apartment. It installed easily and has had zero issues after 1 year.It looks a bit more commercial than I would have opted for otherwise but the price sold me on it and I have no regrets
P. Harling
March 29, 2025
Good quality. I used it in an office washroom. The mounting system is intelligent and functional. I needed a wall mount for the wheelchair clearance to keep city hall happy. It feels solid against the drywall. A standard faucet and pop-up drain fit easily and doesn't leak.
Customer
February 3, 2025
good quality and price point
J W
January 29, 2025
good one
Customer
January 27, 2025
good quality and price point
J W
January 25, 2025
good one
Recommended Products
