Your cart is empty.
Your cart is empty.Product Description
Clamp Meter Multimeter
MAYILON MY2022B 6000 Counts Multimeter Voltage Tester
MAYILON digital AC/DC current clamp meter is a kind of portable multifunctional measuring instrument with stable and superior performance, safe and reliable. It can be used to measure AC/DC current, AC/DC voltage, frequency, duty cycle, resistance, capacitance measurement and line on/off, diode test, etc.
Amp Meter Clamp AC/DC
Specifications
Body size :217mm*77mm*39mm
Jaw elongation :30mm
Operating temperature: 0° C-40 °c;
Storage temperature: -10° C-50 °C
AC Current: 6A/60A/600A ±(3.0%+6)
DC Current: 6A/60A/600A ±(2.5%+8)
DC Voltage: 600mV ±(1.0%+2)/6V/60V/600V ±(0.8%+3)
AC Voltage: 6V/60V/600V ±(0.8%+3)
Frequency: 99.99Hz/999.9Hz ±(1.5%+5); >1kHz
Duty Cycle: 0.1~99.9% ±3.0%
Resistance: 600Ω/6KΩ/60KΩ/600KΩ ±(0.8%+3)/6MΩ/60MΩ ±(1.2%+3)
Capacitance: 6nF/600nF/6μF/60μF/600μF/6mF/60mF ±(4.0%+5)
Multimeter Clamp
MAYILON MY2022B Multimeter Comprehensive Index
Automatic selection of measurement functions and ranges.
Safety/Compliances: CAT.III 600V
Pollution Level: 2
Working height: Maximum 2000m
Display: LCD; The maximum displayed value is 6000 digits.
Polarity indicator: Automatic indicator, '-' indicates negative polarity.
Hyperview display: 'OL' or '-OL'.
Sampling time: about 3 times/second
Power Supply: 1.5V/AAA No.7 battery 3
Temperature coefficient: less than 0.1X accuracy /°C
Clamp on Amp Meter
Multi-function amp clamp multimeter
- INPUT jack: voltage, resistance, frequency, duty ratio, capacitance, diode line on and off File input terminal.
- COM jack: voltage, resistance, frequency, duty ratio, capacitance, diode line off File common terminal.
- Clamp head: Used for measuring electrical current.
AC/DC amp meter
NCV Detection
- NCV button: Used to enable non-contact voltage measurement.
- This amp meter tester offers sound and light alarms along with non-contact voltage measurement. When the indication light is on, there is electricity present; therefore, please be mindful of your safety.
Backlight /Flashlight
- In the process of measurement, if the ambient light is too dark to make the reading difficult, you can press Backlight /flashlight button to turn on the backlight and turn it off automatically after 30 seconds.
- Press the Backlight /flashlight button during this period to turn off the backlight.
- The instrument will turn on the clamp head lamp when the backlight is turned on. The luminous body of the backlight source is LED.Its operating current is high, although the meter has a timing circuit (about 30 seconds).
Automatic shutdown time: 15 minutes
- If there is no operation within 15 minutes after startup, the instrument will automatically shut down to save power.
- 1 minute before the shutdown, the buzzer has three prompts, and the shutdown begins after one long sound The state of sleep.
- After automatic shutdown, press any key or rotate the turntable to restore the instrument to working state.
- If you hold the ""SEL"" key for more than 2 seconds while starting the machine, the automatic shutdown function will be cancelled.
Correct Measurement
- Please measure in the correct way, otherwise the readings will not be accurate.
- Remove the marker from the meter before measuring with the current clamp.
- Clamping two or more wires of the line under test at the same time cannot obtain correct measurement results.
- For accurate reading, the conductor under test should be centered on the current clamp as far as possible.
Alberto Davila
2025-08-06 13:44:04
Excellent multimeter! Great value! I'm a business owner and service technician for wastewater pumps and control systems. I bought this unit on a whim to replace a professional unit that was lost in a project. This unit has worked flawlessly and reliably for several projects now. Works better than my old professional unit! I've bought more units for my employees and the are working perfectly! My employees prefer these units over the older units. More features, less cost. It's a win/win. Highly recommended!
David Anderson
2025-08-04 16:45:33
Edit: The resistance function didn't work. The seller politely reached out to me to replace the defective meter. This one works great and seems like a quality tool with a nice carry case for it. They did me right, and I appreciate it. Thanks
Customer
2025-08-03 10:23:30
I never had one, and had to learn a lot. Comes. With everything you need. As accurate as my multimeter and safer. After understanding it, I measured the positive lead with clamp on my 12 volt solar system and that was exciting because I can see the potential for my car as well. The case is nice and soon I will check the temperature on the input near the meter on my Solar input because it is hot. Batteries included.
Ham Radio Guy
2025-07-25 11:56:43
I got tired of my expensive meters being stolen at work so I bought this thing. I've used it with 480 volt 3 phase multiple times and so far it hasn't exploded in my hand like I figured it might. If you're looking for something that does what it says it does and it's actually pretty safe to use and meets the ratings that are stamped on it go for this one. You can't always trust a lot of the made in China claims on Amazon but this one really does do what it says it does you won't be disappointed.
Mark A. Lucier
2025-07-21 17:42:55
This multimeter is easy to use, great for a non electrician. Needing this tool for checking welding parameters, which doesn't need an equity loan to buy.
Tim Abrams
2025-07-07 14:06:41
The amp meter part has never worked and didn’t even know it until I needed it for the first time. Everything else is great but I got it for the amp clamp
Customer
2025-05-29 10:53:56
Works perfect for testing amps on welders as that's what I needed it for. Seems well built as well. Would buy again.
Janel
2025-05-05 16:42:27
The third time I used it it didn’t work tried new batteries nothing on the screen no audible o resistance reading I new when I purchased it it wasn’t a klien or fluke but jeez was I disappointed
Alberto Davila
2025-04-30 18:20:16
Excellent multimeter! Great value! I'm a business owner and service technician for wastewater pumps and control systems. I bought this unit on a whim to replace a professional unit that was lost in a project. This unit has worked flawlessly and reliably for several projects now. Works better than my old professional unit! I've bought more units for my employees and the are working perfectly! My employees prefer these units over the older units. More features, less cost. It's a win/win. Highly recommended!
David Anderson
2025-04-24 17:16:47
Edit: The resistance function didn't work. The seller politely reached out to me to replace the defective meter. This one works great and seems like a quality tool with a nice carry case for it. They did me right, and I appreciate it. Thanks
Customer
2025-04-22 10:16:45
I never had one, and had to learn a lot. Comes. With everything you need. As accurate as my multimeter and safer. After understanding it, I measured the positive lead with clamp on my 12 volt solar system and that was exciting because I can see the potential for my car as well. The case is nice and soon I will check the temperature on the input near the meter on my Solar input because it is hot. Batteries included.
Ham Radio Guy
2025-04-04 12:58:11
I got tired of my expensive meters being stolen at work so I bought this thing. I've used it with 480 volt 3 phase multiple times and so far it hasn't exploded in my hand like I figured it might. If you're looking for something that does what it says it does and it's actually pretty safe to use and meets the ratings that are stamped on it go for this one. You can't always trust a lot of the made in China claims on Amazon but this one really does do what it says it does you won't be disappointed.
Mark A. Lucier
2025-04-02 14:55:58
This multimeter is easy to use, great for a non electrician. Needing this tool for checking welding parameters, which doesn't need an equity loan to buy.
Tim Abrams
2025-03-01 17:48:49
The amp meter part has never worked and didn’t even know it until I needed it for the first time. Everything else is great but I got it for the amp clamp
Customer
2025-02-05 14:28:31
Works perfect for testing amps on welders as that's what I needed it for. Seems well built as well. Would buy again.
Janel
2025-02-02 15:42:18
The third time I used it it didn’t work tried new batteries nothing on the screen no audible o resistance reading I new when I purchased it it wasn’t a klien or fluke but jeez was I disappointed
Recommended Products