Your cart is empty.
Your cart is empty. 1 HP, 110V/120V, 11.5A, 60HZ
Valve Action :One Way-Pressure / Release Pressure
Max Hydraulic Pressure:10,000 Psi
Flow Rate(2 Stage):
1st Stage - 1.32 US Gallon/Min (290 Psi)
2nd Stage - 0.185 US Gallon/Min (10,000 Psi)
Hydraulic Fluid Capacity: 0.8 US Gallon
Customer
2025-07-20 14:28:24
Excellent pressure and volume. Great value for the money. No more foot pump..
Paulie
2025-06-10 21:51:01
Small portable and industrial grade strong
Timothy Jacobson
2025-04-15 15:37:28
The media could not be loaded.
Kindle Customer
2025-01-30 17:05:05
It came fast but had the wrong plug so I took it apart and put a usa style 110 plug on which took a little figuring out but it worked fantastic it's a very small brush motor and after I ran it for a few hours I drained the oil and put in fresh qualityAW 32 oil in it their was some trash in the old oil I figured it would tear up immediately but a year later using on a autobody frame machine and working the crap out of it no issues except the pendent had the contacts misaligned I took it apart and fixed them works fine now the bad the pendent is way to short like 5 feet and it pulls so fast that it is tricky to control on fine work I usually put on a foot box pump for the control reason I would buy again because the speed and power make rough in work fast.
Levi
2025-01-15 17:11:36
I bought this to hook up to a 70 ton Whitney punch. I was able to punch1 1/8 in hole and a 1-in thick steel plate.As far as the pump lasting I'm unsure, I've only had it for 3 days.
Javier Martinez
2025-01-07 12:45:14
Deben de mejorar el suiche
scott g.
2025-01-03 16:26:14
Does not produce the max pressure it says it produces. Motor is not strong
Marino
2024-11-17 18:51:26
Las conexiones de las mangueras no se adaptan a la máquina. Qué conexión se necesita. Urge!!!
Recommended Products
$27.95
$ 13 .99 $13.99