Your cart is empty.
Your cart is empty.Product Description
APIELE Brand New Products
Specification:
- Mounting Cut Hole: 12mm ( 0.5”)
- Operation: Momentary
- Structure: 1NO
- Switch rating: 3A,12V AC/DC
- LED Pattern: Ring Indicator
- Contact Material: Aluminium Alloy
- Protection Degree: IP65
- 100,000 Times Electric Work Life.
APIELE Aluminium Alloy Push Button Switch 150mm Pre-wired
Wire Length: 150mm
This All Metal Switch Functions Manually As A Replacement Of Auto Refit, Boat Refit, Instruments Apparatus, Enter Guard, Household Appliance. It Provides Solid And Crisp Push Feedback And Comfortable Led Light. Ip65 Waterproof Make It Can Be Used In Humid Environment. Metal shell tolerates vibration and other harsh environmental conditions. The Improved Wire Diagram Come With The Switch And A Non-Electrical Person Can Install It Easy. Get A New One If Broken In 3 Years.
- Package Include:
- 2PCS 12mm Pre-Wired APIELE Push Button Switch
- ATTENTION: 12mm switch is a very small switch.
Aluminum Alloy Shell
The metal shell and push part is not easy to damage.
Long Work Life
More than 1,5000 times electrical work life.
Pre-wired Design
The switch is pre-wired with 150 mm cable. The connector is covered by rubber and not easy to fall off.
Screw on Design
12mm (0.5") Mounting Hole Size. Put the switch into the Mounting Hole, then screw on.
What is a Latching switch ? The Latching switch will remain on once it is pressed and stay on until it is pressed again.
Auto Refit
- Use this switch to replace the light switch, horn switch or other control switches in the cars/ boats/ trucks. Bright and comfortable Led and metal appearance make the switch very cool.
Door Bell/ Entrance Guard Push Button
- It can use as a door bell, entrance guard push button switch in the outdoors. As it is IP65, it can work relatively harsh environment.
Household Applicances Control
- It is also a good choice to use it as a replacement switch of household Appliances. Such as table lamp switch, PC switch, Audio switch.
About APIELE
APIELE provides you with professional technical support services. If you encounter any problems during use, please contact APIELE, and you will get a perfect solution.
Professional Technical Support
APIELE provides you with professional technical support services. If you encounter any problems during use, please contact APIELE, and you will get a perfect solution.
Quick After Sales Service
Staffs in our service team have rich experience in after-sales service. Email will be respond within 18 hours. We provide 1-2 years after sales service for different products.
Customer
2025-09-05 13:14:39
Looks nice, feels sturdy, and works great as a power button for a computer in a custom case. The LED lights up beautifully using just the header pins on my motherboard. The cables are a bit short, but that's fine since I needed to add female pin connections anyway.
Andrew C
2025-08-28 12:21:21
These work fine for what I need them to do. I didn't wire up the LED ring as my circuit is just completing a ground.Use a 1/2" drill bit to make the hole for it. It is slightly larger than the switch diameter, but the retaining ring will still grab onto the surface fine
L J Reichert
2025-08-19 13:18:57
I like the looks of this switch, black with a blue "glow" around the central button when wired to 12 volts. I would have liked it to be brighter, as it may be hard to tell if it is lit in a bright room. Pushing the voltage to 20 volts gives a nice light but would, of course, shorten the LEDs life. Because of its small size I was concerned that the button might have to be pushed below the level of the switch's bezel (a challenge for fat fingers), but that is not the case. The contacts begin to mate at about a half-press and the button's full travel is not beyond the bezel. The actual switch "button" is only about 5/16" diameter, roughly 8 mm, and the outer bezel measures 9/16" or about 14 mm.The switches (there are two in the package) come with instructions but, due to the nicely color-coded wires, they are not really needed. Red (+) and Black (-) wires power the LED and the two Blue wires are the switch contacts.Nice little switches at a reasonable price. Overall, I am happy with this purchase.
Nunya_Binnez
2025-08-06 11:09:54
Nice little buttons. Wiring diagram is included in case you need it. 1 of 2 had the finish worn off of the visible side of the housing so I deducted one star for letting it leave the factory that way. Fortunately for my application, the finish is irrelevant. I would buy again.
dave
2025-06-11 12:11:38
Switches arrived in sealed package, with clear English language instructions, detailing 2 different wiring options. (Constant On LED, or lit when pressed)Schematics & well marked terminals make these easy to use.Switch mechanical action is smooth & light, but with positive tactile feedback.Tried with 9 & 12 V batteries, nice illumination level, very consistent. LED's draw about 11 mA, if power consumption is a factor. I intend to try a longevity test w/ CR23 (12v) battery. Battery rated @ 54 mA*Hrs, so I expect to get about an hour out of it. Don't think that will work for me, but we'll see.I'd definitely buy these again, should the need arise.
Silva Acopian
2025-06-07 12:55:06
The product was exactly what we needed and works well
Wakefj
2025-04-17 16:11:44
I used these to mount garage door opener buttons in my two cars (I hate fiddling for a clicker or having it be so obvious on the visor). The switches are responsive and I like the soft glow LED lighting around the push button, making it easy to find in the dark.
Rick
2025-02-20 11:43:08
Installed the switches in a joystick One works phenomenally the other one quit after about 20 to 30 cycles of use The button keeps sticking inside of the housing still actuates. You just have to use a pic to pop it out every time. Hoping it was just a fluke.It was not a fluke all 4 I have ordered have failed in very short amounts of time I would not waste money on them for the very short lifespan
John Lake
2025-01-30 13:13:33
I like the look of these switches. I’m using them to control the lift and lowering of a tonearm via an Arduino.
Recommended Products