Your cart is empty.
Your cart is empty.
Applicable for Honda Accord 2003-2012, Crosstour 2010-2014
Applicable for Acura TSX 2004-2014
Kendell Rose
2025-09-01 12:17:30
Good for my Honda accord exl 07 v6 3.0
Richard Nixon
2025-08-31 17:49:01
These are half the cost of the Moog end links which is why I bought them, and why I would recommend them. However note the design is similar to the terrible stock design on the accord end links where you need an allen wrench to hold it in place while you tighten/loosen the nut. These use a torx wrench, which should in theory work better for not causing slippage. But if these rust the same way the stock ones do, which I suspect they probably will, they could be a huge pain to remove in the future. Moog uses the better design, but at x2 the cost for a part I dont plan on removing remove again, I think this is a perfectly acceptable option.
Lasted 5 seconds
2025-08-05 16:44:33
Fit my 2004 Honda Accord just fine. No issues
Tony Mane
2025-08-01 17:04:12
Needed new ones as my car had hit 260k miles and wanted to take better care of it. Since mine were so worn and rusted it was a pain to replace this. I spent less time replacing the lower control arms then I did replacing both of these! But if you need them and you are doing your suspension. Don’t be cheap and just get them.
Big lar
2025-07-20 11:25:59
Good product works as they should
Israel
2025-04-15 09:17:40
taking the old ones out were a pain in the azz because of the little space that was available on my 2010 Honda accord lx-p but installation of these sway bars links were really easy to install , my old sway bar links were torn so I replaced them but I was also hearing a clunking noise near the sway bar links and if your hearing the same definitely look into replacing the sway bar bushing it solved the bad clunking noise I would hear
William Morris
2025-03-29 13:05:40
Made my Accord feel like night and day. this was very needed, it made the ride smoother thru bumps and turns. Old originals had 230,000, so yeah. Noises went away. Also did the bushings on the Sway bar. Happy customer#DIYS
Garbin RodrÃguez
2025-02-14 13:56:38
bien
Recommended Products
