Your cart is empty.
Your cart is empty.Product Description
Note:
1,Please don't stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface.
2,Please remove the residual glue and clean the surface.
3,The 3M Vhb adhesive pad is one-time use. please sealed preservation.
4,It is Recommended to wait at least 24 hours after stuck before using. The longer the adhesive time, the stronger the viscosity will be.
5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film. If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off.
Easy installation：
Step 1,Remove the residual glue.
Step 2,Clean and dry the car phone mount base completely.
Step 3,Tear off the yellow protective film.
Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base, then wait for about 2 hours to tear off the other side red film.
Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris.
Step 6,Tear off the other side red protective film, Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use.
If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film.
chris kracke
August 17, 2025
These are very sticky and do a good jobThey fit the windshield mount for our camera perfectlyGreat value for the money and are very easy to useThese have a great ability to hold even in the 117 degree heat here in ArizonaHighly recommend
abassham
July 14, 2025
Was having trouble getting a windshield traffic cam mount to stick with other adhesive. This worked well and I have no issues. the part was a 3D printed mount made of carbon fiber PETG. Hard to stick to but this product worked.
mary snow
July 10, 2025
It did not stick to well in my window guess the heat has an effect but it holds longvenough ti use and replaced with another pad.
richard
May 22, 2025
Quite effective. Perhaps a bit too much holding power. I had trouble getting them to come loose on counter tops, but with a little coaxing with my fingernails they finally came loose.
HappyShopper
May 6, 2025
The summer is so hot that the car dash cam fell off as the sticky pad no longer holds. I didn't have high expectation for this. But it worked really well. I did apply two pads to one cam though.
Wende Kerl
April 15, 2025
Great price! Work well!
Karen W
February 24, 2025
This are really nice quality sticky mounting pads, but I found they don't work so well for mounting my dash camera because they come off in the heat. There's something about the adhesive that's not as effective at high temperatures.It's alright, but not the best for my use case.
Wonbuck
February 17, 2025
Waited 3 months to give my review. I try to find reviews where the item has been used for a few months because most 5 star reviews are people writing a review as soon as they get a product.Anyway, I used this for my dash cam because i had to get a new windshield and after 3 months of usage it’s holding up very well.I’ve gone over my share of hard bumps on the road where it was hard enough to wake up my dash-cam screen from snooze mode thinking a possible incident took place but these two sided pads didn’t falter. Just make sure you clean the windshield, get a clear static cling sheet for the windshield and then mount the cam with the double side 3m product on top of the static cling sheet for easy/quick removal. From my experience I’d buy this product again.
Recommended Products