Your cart is empty.
Your cart is empty.Brett
August 16, 2025
I used this on my 1998 chevy silverado for more solid braking. Works great and bolts right up!
Sterling L. Robertson
August 5, 2025
Works great on my 96 Blazer. Only issues is that it was tall for my Blazer so I had to hammer the hood to fit but works great! I had issues with other master Cylinders not working and hate the older large flat tops for bleeding so this works great. I use a power ball bleeder that has a cap that screws onto the MC lid and pushes brake fluid in from the top. This makes brake bleeding simple and a 1 person job. I will hopefully never use a suction bleeder again. They just suck Air into the threads of the bleeder so they don't work well.
Alexandria
July 31, 2025
The old white warrior rides again! We bench bleed the cylinder with the syringe method all went well 💪ðŸ¼
Anthony K. Blais
July 18, 2025
not exactly correct for a chevy suburban with towing package.it does fit and works as it should otherwise
Henry Smith
July 14, 2025
Just what I expected
Ryan
June 3, 2025
works well, good build;
John S.
March 5, 2025
Product faulty from factory. Piston faulty and locked in place would not release brakes and allow hydraulic fluid to return to reservoir. Pay to get oem. More expensive but you get what you pay for
Linda in Arkansas
February 4, 2025
Cylinder itself devoted a pinhole leak. Brake fluid spewing out of pinhole when brakes applied. Less than 90 days old to us. Site says can't be returned after 30 days. Poor results, poor quality, poor business practices.
Bob Aubie
January 20, 2025
Worked perfect for the OBS gmc upgrade!
Ken Kermack
December 28, 2024
Fit is good and functions well time will be the test of quality and value
ashton
December 24, 2024
I returned this product. The threads for the brake lines were not machined properly, and this cylinder could not be installed. I would go get a better quality part from elsewhere.
Recommended Products