Your cart is empty.
Your cart is empty.Product Description
Araca Optical System & HD World
- Araca is an electronic component R&D manufacturer and lighting system R&D manufacturer, we apply advanced optical technology to the projector light source.
- We have been improving our production process for many years, and we are confident in the process of the entire production process. The advantages of our raw materials combined with our process are neat and beautiful appearance and stable lamp body. Some customers may find that the bare bulb falls out of the housing when they receive it, but this will not happen with our bulbs.
- Because projector lamps are very fragile precision products, we found that if the lamps are not well packaged and protected during transportation, the quality of the lamps will be greatly reduced due to the bumps during transportation, and even after replacing the new lamps, the new lamps will not work at all. So in order to improve our packaging, we even did a lot of real scene simulations, such as gravity tests, extrusion tests, etc. In addition, we also improved the packaging structure and packaging methods.
- We are eager to take you into a high-definition bright, and dynamic world.
Bulb model: for BL-FU240A /SP.8RU01GC01
Ctrl+F to find your model
for OPTOMA DH1011 EH300 HD25-LV HD131X HD2500 HD30 HD30B HD25 HD25-LV-WHD Projector Lamp
The main parameters
- Power: 240W
- Output: 3800 lumens
- Working hours: More than 4000 hours
- Period: 200 days
Our attitude towards products and work
- In addition to focusing on improving product quality, solving customer problems is our biggest priority. We will also meet your requests and suggestions.
- A projector needs more than just brightness. What is most worth developing is the stability and durability of the projector. We at Araca have been able to freely adjust the brightness of projector lamps for many years. Since then, we have been committed to developing the life and stability of lamps.
- In order to solve your problem quickly and efficiently, you can refer to the product manual. If you encounter installation or other product problems, we are always here to answer you.
Innovative technology application
Araca creates high-end optical lighting technology, we focus on projector light source, stage lighting, 3D holographic architectural projection and many other fields.
Raise quality standards
- Improve product quality on the basis of improving raw material testing standards.
- The quality inspection team controls the quality of all processes for us.
Installation steps - (Wear gloves to keep bulb hygienic). If the installation is abnormal, Araca will provide you with installation guidance.
How to extend the life of the projector bulb
1. After the shutdown, only wait for the fan to stop before disconnecting the power.
2. After turning off the projector, wait at least 60 minutes to reboot.
3. Do not disconnect the power directly during use.
4. No more than 4 hours each use time.
5. Make sure there are no obstacles around the projector to allow the projector to dissipating heat normally.
6. Regularly clean the dust inside the projector and the bulb, otherwise the elevated temperature will cause the projector shut down automatically to protect it.
Customer
2025-07-22 19:40:36
Only used a few weeks but installation was super simple!
Customer
2025-07-03 16:24:17
Installation was quick and simple with the provided tool and glove. Projector recognized the new lamp and the lamp hour reset was problem free. Brightness is just as good as the OEM. After many actual hours of use over a few month it’s holding strong. Easier, quicker and lower cost than ordering the OEM. Would purchase again.
Customer
2025-06-26 18:36:01
Purchased in late July 2021. Failed in early June 2022. Outside of 200 day warranty.Update. Araca contacted me about this review and sent me a free replacement. Thanks for standing behind your product.
Mel S.
2025-06-13 11:09:15
Only had it about three weeks but so far it made my projector as good as new.
John J.
2025-06-11 10:16:05
This did not work. Colors went crazy and then it would just cut off. Several times. Returned!
Kendric Beachey
2025-05-13 17:53:28
I received this bulb and found there was a part broken on it, so I contacted the seller on FB messenger and they sent a free replacement. Since then, the bulb has been working very well!
Fred
2025-04-29 11:11:10
I decided to take a chance on this lamp even though there were no reviews. It turns out to be great-- nice and briggt bright. I've been using it for about three months now.
Yemi Bedu
2025-04-04 11:27:13
This is similar to the original and that helps installing. Always make sure you follow the instructions and look 👀 at how the original is installed before beginning. Good luck ðŸ€.
Andre
2025-03-18 15:50:32
Very happy with the results. Let’s hope the bulb will last as long with the original one. Picture looks brighter. Excellent at a lighter room condition.
Mohammed Khan
2025-03-09 13:40:03
Like: Nice, clean and well packed bulb. Working just like the original bulb so far.Dislike: I ordered replacement part# BL-FU240A/SP.8RU01GC01 bulb for my Optoma projector. Instead I received part# BL-FU240A/8RU01-OBH bulb with no explanation as to why a different part# bulb. It took me some time to communicate with the seller who then wrote me an explanation that the bulb I received is the correct bulb but with a slightly different part#. Perhaps, they could have included this explanation in the packaging. They were, however, very courteous and helpful.
Johnny Big
2025-01-26 11:49:55
Only 52 hrs and it starts off bright then dims down when projector starts.
Recommended Products
$15.99
$ 7 .99 $7.99