Your cart is empty.
Your cart is empty.Product Description
-
Wide Wrench Sizing Coverage Within A Handy Set
Flare Nut Crowfoot Wrench Sets
This set’s wide variety of crowfoot wrench sizes provides extensive coverage for the removal and replacement of 6-point fasteners. Whether you’re working on fuel systems, hose fittings, plumbing jobs, or simply loosening and tightening hex nuts and bolts in tight spaces, this wrench set has you covered for a wide variety of applications. When you’re done working, just fit your wrenches onto the included anodized aluminum rail for quick and easy storage.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
Chrome Vanadium Steel Construction
With a channel to keep a secure connection with detent ball bearings
Our flare nut crowfoot wrenches feature durable chrome vanadium steel bodies and chrome plated finishes, providing each tool with protection against wear, tear, rust, and corrosion. Each wrench also features a detent channel that locks in detent balls of breaker bars, ratchets, extensions, and other tools. This channel offers superior retention, reducing the risk of a wrench slipping off into a cramped or crowded compartment.
Superior coverage for various jobs working with fasteners in obstructed areas.
A Size for Every Project
From fuel systems, hose fittings, plumbing jobs, to hex nuts and bolts in tight spaces - these wrench sets have you covered with SAE or Metric option.
3/8-inch Drive
6-Point flare nut design crowfoot wrenches fit 3/8-inch drive breaker bars, ratchets, extensions, and other tools. Anodized aluminum rail for storage.
Detent Ball Channel
Detent channel locks in detent balls offering superior retention, reducing the risk of a wrench slipping off into a cramped or crowded compartment.
Durable CR-V Steel Constructed
Feature durable chrome vanadium steel bodies and chrome plated finishes, providing each tool with protection against wear, tear, rust, and corrosion.
John
2025-09-04 13:46:32
Good quality, work like they should, nice size
RAR
2025-07-14 18:17:32
Very sturdy and fits in tight spaces. I bought this set to use with a torque wrench and it's plenty strong. I even snapped a shackle bolt clean off but the crowfoot was fine.
Stephen Parrinello
2025-06-22 14:40:36
Awesome lil tools, I played around with then and like how they just need a extension and braker bar to work like a regular ratchet. Good example, i had to use the middle one on my jeep xj for the driver shock, all I needed was an extension and braker bar and it worked like a dream.
Jim down south
2025-06-17 11:58:25
Although I tried very hard to use it to tighten a hydraulic line, it just wouldn't clear enough to go on. hopefully in the future I can use it.
aaron jones
2025-06-10 14:19:29
Haven't had any issues with them so far
Skyler Marshall
2025-04-23 11:04:14
These can be a life saver when you really need them. Have not broken one yet.
VJ
2025-04-11 14:46:32
I had a problem fill plug on a manual gearbox that refused to budge. The hex protrusion was 13mm and when I applied the wrench it would not budge, and when I used an extension it just rounded it off. Now what? I used a pair of locking pliers as tight as I could and all it did was scrape off more metal. Still the plug would not budge, it was stuck in some sludge, it held a grudge, and I yelled out, "FUDGE!" Sorry. I was a teacher and occasionally I channel Dr. Seuss. I knew that If I did not find something serious soon I had a lot of work ahead. I normal circumstances I would drill and use an easy-out, but there was just not enough room between the gearbox and the frame to work comfortably, safely, and effectively. I know I needed a serious tool. I found the Ares three piece set. I know that I likely needed the 1/2" size so for just a bit more than the two-piece set I opted for the three tool set.If you look at the photo you can see what was left of the bolt's hex protrusion. Yes, it use to be a 13mm hex but obviously not any more. The 1/2" drive Ares grabbed what was left of the fill plug and using an 18" long, 1/2" drive breaker bar with a swivel hear drive drive through the Ares's square-drive opening , it took a good, straining Zen pull to break the plug loose and remove it. I would have extended the breaker bar but that was all the room I had under the car.The Ares crowfoot grabs like a hungry gator, digs in and won't let go! It made me glad I got the three piece set because you never know! You can see how deeply and securely the Ares bit into the metal, but note that it did not slip. I replaced that terrible plug with a proper hex-head bolt made for the purpose.
Mark Genovese
2025-03-24 14:19:18
Generally this is a well made tool and it offers potential usefulness. I say potential because many times the tight confined associated with auto repair prevent or hinder it's use. I initially bought these to deal with the inner tie rod ends on a 2002 Honda Civic only to realize they didn't fit within the area. I ended up getting a traditional crowsfoot to work. So I currently own a solution looking for a problem. I have used them a couple of time but I would not call them indespenseable as traditional crowsfoot wrenches could have been used just as effectively.
U.D.Jen
2025-03-11 18:27:06
Die Bestellung wurde schnell verschickt und wurde überpünktlich geliefert. Qualität ist auch gut
Don B
2025-02-26 18:56:02
Used this to get access to hydraulic lines with poor access. Really helped out for tightening access so worth it in my case. The quality seems good and the 16 point gives you lots of range for limited access spots. Fairly thick crows foot thickness so thin access might be a problem for some spots. Recommend this tool.
Cliente de
2025-02-05 12:49:42
En tiendas locales una sola llave tiene el costo que este set de dos. Se ven fabricadas con buena calilad.
Shawn dufault
2024-12-15 11:38:45
Recommend
Recommended Products
$21.49
$ 9 .99 $9.99
$128.99
$ 51 .99 $51.99