Your cart is empty.
Your cart is empty.Reduce Panel Damage and Clip Loss The ARES Ergonomic Plastic Fastener Remover helps you remove automotive audio equipment, door panels, trim panels, window trim, emblems, plastic and metal clips without damaging upholstery or the trim. Made of the highest quality grade A+ stainless steel with a chrome plated finish that won't fade or break, this fastener remover features an ergonomic ABS handle for a comfortable grip and easier use. This tool is built to last a lifetime! Features: Includes: 1 pc. Plastic fastener remover Constructed of high quality grade A+ stainless steel Chrome plated finish won't fade or break Ergonomic ABS handle prevents hand fatigue Corrosion-resistant Prevents damage to upholstery and trim Works on automotive audio equipment, door panels, trim panels, window trim, emblems, plastic and metal clips
Customer
2025-09-03 10:12:50
Very sturdy and feels nice in hand
Weaver Cattle Company
2025-09-02 16:07:06
If you work on ATVs then do yourself a favor and purchase this kit. One of the tools works perfectly for removing ATV 8mm body retaining pins. It sure beats using a flat-tip screw along with a pair of side-snips which tend to end damaging the pins no matter how careful you are.These clip removers are well made with nice handles and well worth the price in my humble opinion.
1542
2025-08-27 14:04:48
The brakelight bulb in one of my car's tail lights failed and needed to be replaced. In order to be able to do this, you generally need to remove a few plastic fasteners that hold the trunk's carpeted liner in place before you can get access to the tail lights. This tool (and a little muscle) makes it easy to pop off the plastic fasteners without breaking any of them. Sure, you can probably do the same thing with a screwdriver and pliers, but this tool simplifies the job, saves you time, and makes it much less likely that you'll break the fasteners as you remove them. I only wish this were a bit less expensive, but it is well made and very comfortable to use.
Kent E. Swayne
2025-08-21 13:02:34
Very handy and work well especially when removing window or door moldings.
gecko
2025-07-28 17:46:29
I got this tool based on recommendations and it does not disappoint. I have already used it a couple times and it made a big difference. I thought originally, I might have to "dress" the end edge, but it is just fine as is! A hefty tool and quite stiff for a prying application. A good addition to my never-ending tool collection!Thank You
Reepeat
2025-07-17 15:39:13
Almost all I needed. Only used a plastic one to hold one area I'd already popped out while I worked on an area further down. Very sturdy tool.
BADKARMA
2025-07-03 12:25:40
These look flimsy and cheap but when you get them they are really tough. Even if you try to bend them with your hands there is no flex. These will work great, much better than the plastic ones.
Miguel
2025-06-20 18:41:31
Sin duda son de lo mejor, Stainless steel
Zaggy
2025-05-14 15:54:36
This wedge screams quality and craftsmanship. Heavy and well built… The uses for this are Endless but you might not want to scratch it… it’s that nice.
Robert Zanatta
2025-05-13 18:21:32
Really well built. Plenty thin enough for interior trim, yet very stiff and strong so can be used for other jobs requiring something stronger then plastic.
Customer
2025-05-11 16:44:02
Slightly blunt, thicker than glazing bar. Touch-up ends to preferred taper. VG value. Not rusting.
Bill Jackson.
2025-05-05 13:43:26
Sturdy construction and nice sharp edge for working through sealant.
Valdas V.
2025-04-21 15:17:22
I work as aircraft maintenance engineer apprentice, and they come in handy a lot. Especially when you want to separate parts with prc.
Customer
2025-04-12 09:21:12
Very sturdy and feels nice in hand
Weaver Cattle Company
2025-04-05 14:04:58
If you work on ATVs then do yourself a favor and purchase this kit. One of the tools works perfectly for removing ATV 8mm body retaining pins. It sure beats using a flat-tip screw along with a pair of side-snips which tend to end damaging the pins no matter how careful you are.These clip removers are well made with nice handles and well worth the price in my humble opinion.
1542
2025-04-01 09:46:19
The brakelight bulb in one of my car's tail lights failed and needed to be replaced. In order to be able to do this, you generally need to remove a few plastic fasteners that hold the trunk's carpeted liner in place before you can get access to the tail lights. This tool (and a little muscle) makes it easy to pop off the plastic fasteners without breaking any of them. Sure, you can probably do the same thing with a screwdriver and pliers, but this tool simplifies the job, saves you time, and makes it much less likely that you'll break the fasteners as you remove them. I only wish this were a bit less expensive, but it is well made and very comfortable to use.
Kent E. Swayne
2025-03-27 18:42:39
Very handy and work well especially when removing window or door moldings.
gecko
2025-03-15 12:59:55
I got this tool based on recommendations and it does not disappoint. I have already used it a couple times and it made a big difference. I thought originally, I might have to "dress" the end edge, but it is just fine as is! A hefty tool and quite stiff for a prying application. A good addition to my never-ending tool collection!Thank You
Reepeat
2025-02-24 16:13:06
Almost all I needed. Only used a plastic one to hold one area I'd already popped out while I worked on an area further down. Very sturdy tool.
BADKARMA
2025-02-21 15:29:53
These look flimsy and cheap but when you get them they are really tough. Even if you try to bend them with your hands there is no flex. These will work great, much better than the plastic ones.
Miguel
2025-02-03 16:55:12
Sin duda son de lo mejor, Stainless steel
Zaggy
2025-01-11 14:32:27
This wedge screams quality and craftsmanship. Heavy and well built… The uses for this are Endless but you might not want to scratch it… it’s that nice.
Robert Zanatta
2024-12-30 10:03:48
Really well built. Plenty thin enough for interior trim, yet very stiff and strong so can be used for other jobs requiring something stronger then plastic.
Customer
2024-12-23 12:18:38
Slightly blunt, thicker than glazing bar. Touch-up ends to preferred taper. VG value. Not rusting.
Bill Jackson.
2024-12-14 14:37:24
Sturdy construction and nice sharp edge for working through sealant.
Valdas V.
2024-12-10 11:18:14
I work as aircraft maintenance engineer apprentice, and they come in handy a lot. Especially when you want to separate parts with prc.
Recommended Products
