Your cart is empty.
Your cart is empty.Product Description
Arlington LV1-10 Low Voltage Mounting Bracket, 1-Gang, Black, 10-Pack. Mounting bracket has Oval holes that allow final shifting and straightening. Easy to install, for mounting low voltage wires(phone, internet, TV, video). Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened. Bracket is its own template for cut-out, trace the bracket then cut the hole, includes 10 low voltage mounting brackets. Horizontal or vertical mounting, installs faster and costs less than metal brackets, UL/CSA Listed. Protects cable as it runs through the knockouts in metal studs.
From the Manufacturer
Arlington's non-metallic, low voltage mounting brackets are the time and money-saving solution for faster and easier mounting of class 2 communications, computer and cable TV wiring. The bracket is its own template. Simply level the bracket on the wall, then use the bracket as a guide for the cutout by tracing a line around the inside. It is designed to mount wall plates flush by offering specially designed screw holes. We deliver a better looking easy to install job. This unit adjusts to fin 1/4-inch to 1-inch wall thicknesses. It can be mounted vertical or horizontal. Also it is UL/CSA listed. Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant.
Sal Fanale
2025-08-14 12:10:19
I used these to install all of the low voltage wiring around my house (Ethernet, phone, coax, and media cables) in conjunction with Shaxon keystone wall plates. These work perfectly as existing work 1gang boxes and got the job done pretty easily, especially since the inside of the frame serves as the template for cutting.At first I felt they were a bit too flimsy in my hands, but once they were well secured into the wall they felt better. One customer posted a photo of a ~5lbs wall speaker hung on one of these plates...I am not sure I would trust it to that extent, but its certainly suited for simple keystones and media wall plates. My concern is that even if the hole is perfectly cut in the wall, you only have about a 3mm plastic flange to press against the wall and that's being pulled on by two small plastic clips. I do not know if there is a weight rating for this mounting plate, but if I were going to hang a speaker I wouldn't rely on this, I would use separate drywall anchors or a more stout remodel gang box.All and all, they are a pretty simple product and for the price they do their job well.Here are the supplies I used to built my media infrastructure:Keystone plates = http://amzn.com/B006IKGHVC and http://amzn.com/B006IKHAZYBlank Keystone = http://amzn.com/B006IKH0EAKeystone Mounting Bracket = http://amzn.com/B003JQL0S8Cat6 Keystone = http://amzn.com/B004D5PFGWHDMI Keystone = http://amzn.com/B0039L3P86Coax Keystone = http://amzn.com/B003099HOICat6 Cable = http://amzn.com/B0049KV52E (the cable this review is written in)Coax Cable = http://amzn.com/B0069F4H3GCoax Right Angle Adapters = http://amzn.com/B00DUW3Y7GWall Mounted patch panel = http://amzn.com/B000HZES42Cat6 Crimp connectors = http://amzn.com/B00BS92DCAStrain Relief Boots = http://amzn.com/B000I20B86Crimp Tool = http://amzn.com/B0000AZK4GPunch Down Tool = http://amzn.com/B0072K1QHMCoax Crimp Tools = http://amzn.com/B003J7YOTO
Thunder005
2025-06-19 13:01:59
Amazing quality,what makes this amazing:A.) the boxes are high quality.B.) fits in dry-wall and the hole you cut can be a fraction of an inch small and you can push these into place for a nice tight fit.C.) fits Into wood wall paneling, but you'd need to create a pilot hole with a 1-1/2 inch spade bit. and then cut out the remainder of the hole.what you need to complete this installi.) Measuring tapeii.) Small leveliii.) a Jab saw (i used http://www.amazon.com/Stanley-15-556-Jab-Cushion-Grip/dp/B00002X21W/)Vi.) possibly need a spade bit to start the cut with Jab saw if into wood paneling or the likehow to install:1.) Use a reference measurement either from the corner of the wall or from a power outlet2.) use a magnet or a stud finder, place this anywhere in-between the two studs3.) Find where to make the hole, the top of the Arlington should be an equal distance from the floor as other boxes on any other wall in the house. to find this out without removing a faceplate of any other box, place a faceplate on the Arlington, and measure from the top of another Box on the wall in the room to the top of the Arlington with Faceplate. mark on the wall where the top of the Arlington will be. or where the top of the faceplate is and then subtract the top of the distance from faceplate to Arlington.4.) The reference measurement should be to the center of where you'll place the Arlington, use the level ontop of the Arlington, place face against the wall, level with the level, and at the Height needed from step#3.5.) trace the inside opening of the Arlington with a pencil or pen (i suggest pencil so the marks can be erased if a mistake is made)6.) using the level, make sure the lines create a perfect square / rectangle.7.) using the jab saw cut along the outside edge of the lines you just traced8.) insert Arlington into the hole you just cut9.) your push stick, pull string, and cat6 should be within 2 inches of your hole if your reference measurements are accurate between the ground floor to attic. 9.A.) For push stick, I used: 9.B.) For Pull string, I used: 9.C.) For Cat6, I used: [[ASIN:B005UFKJPG Cat6, 550 MHz, UTP, 23AWG, 8C Solid Pure Copper, CMR, 1000ft, White, Bulk Ethernet10.) pull through any line you fished down the wall, and insert the Arlington​ and screw tight, but don't over tighten11.) connect your connectors to the line and place faceplates on.
Michael Mach
2025-06-14 17:25:32
As a computer and network technician I was looking for an Old Work low voltage box that I could rely on. I used to go to the big box stores and get the similar ones sold there (see pic of orange box), and every time would get frustrated because the ones at the store do not work, as the screws are not matched correctly with the plastic housing and the effect is a hard time getting it to install. I usually strip the head on the screws in order to get it finally installed.I purchased these after reading reviews on how simple they are. After installing just one of them as a test case, I have to say they are correct (see pic). These low voltage boxes install VERY easy to install. Moreover, I really like the way that they are more flush to the wall then the other ones. I can't begin to describe how little effort I had to use to screw the tabs into place as opposed to the other one. My assessment is that Arlington puts much better thought and effort into the screws and plastic housing.VERY GOOD PRODUCT and will continue to purchase these in lieu of the orange ones at big box.Well done Arlington.
Mark Adams
2025-05-28 10:17:00
Been using these on my installs for years. Great for low voltage runs like category cables. They are quick and work well. Very secure when you need to attach a face plate. Can be used anywhere and don't have to be next to a stud. Great product, I order them in bulk for retrofit installs
sotodefonk
2025-05-16 13:42:54
Funciona muy bien, y queda todo bien apretado. He usado otros que quedan con esquinas levantadas. Recomendado para cualquier proyecto en tablaroca.
Customer
2025-04-07 11:34:06
Installed about 8 of them to run speaker wires into walls. Simple enough to install, cut the drywall, insert it, screw, done. Solidifies the hole well and goes well with wire brush plates.
David
2025-04-01 18:28:20
I got them two days ago but did not get a chance to use them But from the construction it looks like they will work very well for the purpose of the designedI will certainly buy this in the future again as I am paying almost half the price as compared to the big box stores like Home Depot Lowes
Silver Werewolf
2025-01-01 11:05:07
J'ai utilisé ce produit afin d'y installer les connecteurs des hauts-parleurs de mon cinéma maison et les connecteurs réseau. Il est facile d'installer ces supports et ils tiennent bien en place.Je recommande fortement ce produit.
Recommended Products
