Your cart is empty.
Your cart is empty.Bendable Surface Mount LED Tape Light Mounting Channels are made from high quality, double-anodized, aviation-grade aluminum alloy . They can be fitted with the included frosted polymer cover to conceal the LEDs and diffuse the light output. Channels are useful for installations where the lighting will be visible, such as on the underside of a shelf or in a display cabinet, or to soften lighting to minimize reflective hot spots on a nearby surface. They can be cut to length using a fine-tooth handsaw and run in sequence to create a longer fixture. They can be mounted to surfaces with the included brackets or double-sided adhesive tape (not included). Includes mounting hardware and end caps; the brackets guarantee easy and secure mounting to the desired surface, and can also be used as connectors between channels.
Jose Rodriguez
2025-08-19 13:05:26
Absolutely work great. Diffuser is great even when you can see the top of the light.
Ninja Turkey
2025-08-03 17:47:50
I used these with COB LED strips to add some light under the cabinets. They are very nice to work with and give the project a finished look.
S James Muller
2025-07-09 18:33:06
Good quality, easy installation for a moderately experienced craftsperson.
Midwest
2025-05-30 19:08:06
I'm using this for bookcase lighting. Cutting these into 11-in strips is easy. Getting additional endcaps is not easy, so I contacted customer service through an online form to inquire where to get more. That was two days ago and I'm still waiting for an answer. If I can't get more endcaps, I will send it back.
Customer
2025-03-11 11:41:50
Love the channel for under counter light led strip
Michael T. Caulfield
2025-02-23 15:43:07
Diffuser works great. Super easy to install. We used the clips but double back tape would have worked also. The light strips sticks right into the channel. Love how it softens the dots from the lights on the countertop.
engine_gal
2025-02-20 20:43:02
We purchased these deep Armacost channels to use with LED strip lights from same manufacturer to reduce bright spots. (We also tried the shallower Armacost channels, but they didn’t smooth out the light spots enough.) These deep channels did an average job blending the lights. However trying to install them was impossible for a couple reasons. 1) The metal clips that hold the channel would not fully engage when snapped in place, they had to be slid on from the side. Our cabinets have light rail installed which restricts side access, so sliding on the channels was impossible. 2) Even after working around the clip issue, we found the plastic lens was too tight to slide all the way onto the full length of the channel. Either the lens was too wide or the channel was too small. This issue will affect any type of install, not just under cabinets. We purchased and used Muzata LED channels instead.
Frunnin
2025-01-05 20:43:55
Easy to install. I secure it with #6 screws. The diffuser gives a nice even light with 60 light per meter tape. Nice upgrade from just the tape stuck on by itself. Takes it the pro level.
Recommended Products
