Your cart is empty.
Your cart is empty.Product Description
Pilot
2025-08-30 12:57:03
Let me start with the wheels worked perfectly after I installed them. The installation was a challenge but in the end all worked out. The wheels came with the 3/4 hubs installed. I had to remove them with a punch and hammer but they came out. Then I had to install the 1/2 ones. That was a little hard but I did it. The cart had too long a tube that the axle fed through so the wheels did not fit. I used my grinder with a cutting wheel to cut 1/4 inch off the cart and then the wheels fit on the axle perfectly. The cart rolls easily and the wheels are well made. If someone buys these and are not able to do some minor adjustments to the supplied wheels axle hubs they will not be able to install them.
R. Moore
2025-08-25 10:13:40
Put these on generator. It’s 75000 and fairly heavy. Old wheel were terrible. These made a big difference in moving generator when needed. Good quality wheels. Recommend
electronics guy
2025-08-16 15:06:20
The wheels seem fine. Heavy duty, ball bearing, etc. It’s just I’ve ordered two sets with holes for 5/8†axles and get wheels that fit 1/2†axles. The holes are too small for my use so I now have two sets to return tomorrow. If they had bigger holes I could bush them and make them work. First set had 1/2†holes so filed for return and had another set shipped thinking they would be correct. Nope. 2nd set identical to the first with 1/2†holes and totally unusable. Vendor needs to either ship correct parts or fix description.
Richard Pinter
2025-08-06 09:46:43
Very durable, came with multiple bearing sizes.
Kevin
2025-08-04 13:54:04
Git my super old rusty wheelbarrow. was happy that it came with adjustable bearings as i needed to fit the smaller size axel. Fits great and looking forward to another 30 years with this old rusty wheelbarrow
ECOBOB
2025-07-13 14:03:47
Replaced my tires on a pull behind areator.
Larry
2025-07-05 11:38:21
Needed wheels to move a huge generator and these work perfectly. Generator weighs over 300 lbs and these supported the weight.
Jeffrey
2025-06-25 15:03:26
Misleading advertising. Only fits 5/8. 1/2 and 3/4 bearings not included. Avoid them.
T
2025-06-16 19:34:29
Solid well made wheels, no more flats for this guy.
Kevin110
2025-06-06 13:51:20
These are nice strong wheels. Used them on my welding cart. Mine came with two sets of bearings: 5/8 and 1/2 inch bore. Thanks these will take the weight if my welder.
Jamie C. Heim
2025-06-02 10:40:36
Solid wheels, the hub was just too wide for my application.
Moose
2025-04-29 15:39:47
Excellent product which solved my problem of a 1/2 inch bore. Easy to change from 5/8 to 1/2 inch.
JEAN-MARC VINCENT
2025-04-27 14:27:37
bien fait solide et pour 3 sorte de moyeux
Pilot
2025-04-22 18:25:14
Let me start with the wheels worked perfectly after I installed them. The installation was a challenge but in the end all worked out. The wheels came with the 3/4 hubs installed. I had to remove them with a punch and hammer but they came out. Then I had to install the 1/2 ones. That was a little hard but I did it. The cart had too long a tube that the axle fed through so the wheels did not fit. I used my grinder with a cutting wheel to cut 1/4 inch off the cart and then the wheels fit on the axle perfectly. The cart rolls easily and the wheels are well made. If someone buys these and are not able to do some minor adjustments to the supplied wheels axle hubs they will not be able to install them.
R. Moore
2025-04-08 12:29:33
Put these on generator. It’s 75000 and fairly heavy. Old wheel were terrible. These made a big difference in moving generator when needed. Good quality wheels. Recommend
electronics guy
2025-03-20 12:52:54
The wheels seem fine. Heavy duty, ball bearing, etc. It’s just I’ve ordered two sets with holes for 5/8†axles and get wheels that fit 1/2†axles. The holes are too small for my use so I now have two sets to return tomorrow. If they had bigger holes I could bush them and make them work. First set had 1/2†holes so filed for return and had another set shipped thinking they would be correct. Nope. 2nd set identical to the first with 1/2†holes and totally unusable. Vendor needs to either ship correct parts or fix description.
Richard Pinter
2025-03-16 10:25:51
Very durable, came with multiple bearing sizes.
Kevin
2025-03-08 11:03:36
Git my super old rusty wheelbarrow. was happy that it came with adjustable bearings as i needed to fit the smaller size axel. Fits great and looking forward to another 30 years with this old rusty wheelbarrow
ECOBOB
2025-03-02 10:25:19
Replaced my tires on a pull behind areator.
Larry
2025-02-06 21:03:30
Needed wheels to move a huge generator and these work perfectly. Generator weighs over 300 lbs and these supported the weight.
Jeffrey
2025-02-01 17:05:24
Misleading advertising. Only fits 5/8. 1/2 and 3/4 bearings not included. Avoid them.
T
2025-01-17 21:52:00
Solid well made wheels, no more flats for this guy.
Kevin110
2025-01-11 11:08:12
These are nice strong wheels. Used them on my welding cart. Mine came with two sets of bearings: 5/8 and 1/2 inch bore. Thanks these will take the weight if my welder.
Jamie C. Heim
2025-01-03 15:58:04
Solid wheels, the hub was just too wide for my application.
Moose
2025-01-01 17:59:33
Excellent product which solved my problem of a 1/2 inch bore. Easy to change from 5/8 to 1/2 inch.
JEAN-MARC VINCENT
2024-12-28 12:36:21
bien fait solide et pour 3 sorte de moyeux
Recommended Products