Your cart is empty.
Your cart is empty.Product Description
Sliding Adjustable Desigen
Compatible with various graphics cards, meeting your different needs.
Strong Heat Dissipation
It is suitable for most graphics cards and can adjust the wind speed of different gears. Hydraulic bearing design can continuously and quietly dissipate heat from your graphics card.
Protection and Two-way support
The Support arm helps reduce the sag of heavier graphics cards and the stress on PCI-e slot on the motherboard. In addition, the rubber pads on the support arms can also effectively protect your graphics card from wear and tear.
Margaret M.
2025-07-12 18:51:43
I have an MSI RTX 3060ti, 2 fan model, and it gets hot! There's a hotspot on the card that my temp monitoring program picks up and before I installed this GPU cooler, the temp on that hotspot would be over 91c. With the GPU cooler installed, it still runs warm but now rests around 88-89c. The core GPU temp doesn't go above 75c on max load. I didn't expect it to make my graphics card chilly, but it does enough to notice the difference. As for noise level, I think it's just as loud as all my other case fans, so I can't really pick out the sound specifically. I have it just plugged into a regular fan port on my motherboard, so it runs on full speed all the time, which is fine. The noise is not enough to bother me, and certainly isn't as loud as my graphics card running at 100 percent fan speed!As for the mounting system, I saw a lot of reviews with complaints about it, but I actually think that the mounting brackets are nice sturdy metal. The brace on the front of the fans, the part that has the LED strip, is strong and prevents the cooler from sagging. I didn't even remove any of the dust shields from the back of the case, I just installed the cooler right over the top of them, screwing the screws into both the mounting bracket and the dust shields, as seen in one of my pictures. When I first set it in there, it did look a little droopy, but I just bent it upward a little and it stayed. I can even push on it and it won't sag.The ARGB light strip is pretty cool. It syncs up with all my other fans in the case and lights up an otherwise darker spot. It kind of tied the whole look together, really. I think it's pretty great! I would buy again!
M.L.
2025-06-15 14:13:19
My GPU was consistently going above 85° C and I could NOT get it to climb down - I have an Asus Rog Strix GeForce 2070 Super, and it appeared that the GPU fans were going out as well. They still ran but were not spinning faster when the temp was rising, and I couldn't modify the fan control at all.This was a LIFESAVER. AMAZING. Easy plug and play right below the GPU and now I am CONSISTENTLY at 50° C, perfect perfect perfect.Looks great and had instant Fan RPM and RGB control. No drivers or any messing around needed.
GoingToTakeaNap
2025-06-03 15:55:18
If you set realistic expectations, this is a reasonably good product. Just understand that the fans are just small 15mm slim profile fans, so they don't move huge amounts of air. But they do ok to supplement the fans on your GPU. I got them because my rtx 3080 FE runs quite hot. I have already swapped out the thermal pads on the gpu, and wanted a bit more cooling. These fans running at around 1100rpm lower the gpu idle temp by about 5 degrees. When gaming and maxed out at 1800 rpm, the fans reduced gpu temp by 3-4 degrees. Small improvements, but not really the fans fault because the gpu's heat sinks are relatively small and can only handle so much heat.The bracket is definitely the jankiest thing about this product. I had to file the screw slots wider before the screws would fit. They are just barely able to hold the fans up, and you have to finagle the fans to be level. It's fine now but I would have preferred a more robust mounting system.The rgb light bar is a plus and integrates perfectly with the other rgb in my rig. Taking into account the low price of $25 incl tax, I think I'm satisfied with what I got.If cooling is the priority, you don't care about rgb and have the space, consider buying the plain non-rgb full height 25mm fan version made by Wathai also sold on amazon. Not as pretty, but that one should move more air and cool better. And it has a better full slot bracket.
Adam T.
2025-06-02 14:16:22
This cooler is barely pushing any air at all, good thing about this is it is incredibly quite. I can barely feel any air being moved from the fans and saw no decrease in temps. I would of been better off using a PWM fan and just zip tying it in place.
Owen
2025-05-25 10:28:10
Overall the product works great, although the fans are very loud, so if you're going for the "silent gaming" build this definitely isn't the option. But to be fair if you messed around in your BIOS setting you might be able to get the fans to run at a lower RPM.
Frankybigguns
2025-04-26 18:22:57
For those seeking a viable solution for idle GPU temps, this cooler will do it. My RTX 3090 will idle around 55°C when not in use which is a fine temperature. Anything above this and the fans kick in which will bring it down into the mid 40s. But with the ASIAHORSE cooler, you will get about a 10°C drop, which brought my idle temps down to mid 40s. IMO, this is good for longevity of the card and also helps if your GPU has been hot for a while like when following an intense gaming or AI LLM session. For those curious, as I was, the fan direction should be going up and into the card (usually where the heatsink and it's fans are blowing warm are out). Don't ask me the physics behind this. When I turned the ASIAHORSE fan direction the other way to sync with the direction of airflow going out, it only cooled things by 5°C. With the fan direction going up and opposite of the warm air coming out, that brought it down abother 5°C for an average of 10°C cooler.
Nam Lam
2025-04-14 12:22:49
In terms of quality it's not bad, it's made of steel/metal minus the fans, fans looks replacable if needed to, the fans part. Package came in perfectly intact. For coolness it might be good or better in terms of the cases air flow, esthetic wise it's beautiful if installed with back plates. How to install with my plates solo? Hold the back plates with scotch tape and make sure you get started with screwing in the GPU fan mount first before placing it in. I recommend screwing it all in all the way first by itself and then unscrewing it a little before lining up the slot, it makes it easier. Also don't forget to use the anti slip rubber, I made that mistake and installed them last second (that was my nightmare lol). They do come with 2 it's just stuck together.
Fake Namington
2025-03-17 13:01:49
Cools the GPU when its fans are shut off which is nice, really low idle temps now. Looks dope.
Melroy Simon
2025-03-08 17:11:18
Not sure why people are complaining about the bracket, this really fits well and does the job. Seen a difference in temps by 10 to 12 degrees for the graphic card.Well built and the RGB lighting looks great.
jonathan
2025-01-11 17:26:19
. Fits into rgb on motherboards or a rgb fan header or control box displays any color you want on the light strip. Minimal noise. Got it under my Asus tuff 3080ti and when in idle the gpu has a 0 dB fan so when the gpu does not hit a certain temperature it won't run the fans this cooler helps cool it off a bit and in that state I don't see it go above 40c at all. Downside it's a little unstable since it don't sit in a pci slot just has 1 screw holding it
Alejandro A.
2025-01-06 14:04:03
Funciona muy bien reduce la temperatura unos 15 °C me gusto mucho.
Bparks
2024-12-01 11:12:47
Quick and easy
Recommended Products