Your cart is empty.
Your cart is empty.
Features:
The REKONG AX210 160 MHz Channel Width Wi-Fi 6E AX expands the WiFi band from 80 MHz to 160 MHz, doubling the channel width and creating a faster connection from your router to the device. With Wi-Fi 6, you can enjoy 8K movies, large file downloads, and uploads, and responsive smart home devices all without buffering.
Wi-Fi Alliance:
Wi-Fi CERTIFIED* 6, Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM*-Power Save, WPA3*, PMF*, Wi-Fi Direct*, Wi-Fi Agile Multiband
Bluetooth 5.2:
Bluetooth 5.2 provides 4x range over Bluetooth 4.2 using the same Tx power, enabling coverage throughout the home. Bluetooth 5 also double data rates speed for faster transmissions thereby reducing the overall power consumption.Additionally, Bluetooth 5.2 adds new enhanced data broadcasting enabling seamless services such as location-based services and simpler pairing for Bluetooth devices.
6GHz wireless spectrum:
The main thing that differentiates this from the existing AX200 is the ability to use the 6GHz wireless spectrum.With Wi-Fi 6 and 6E on 80hz, you will get 1200Mbps and 160Hz 2400Mbps on a client with 2×2 TX/RX Streams. you have to use the 160Hz channel width if you want to exceed the gigabit throughput offered by most wired solutions. Currently, on the relatively congested 5Ghz channel, you only have six 80MHz and two 160MHz channels.
Antenna Covers Coverage:
6dbi high gain antennas
Antenna 360-degree direction adjustable, better signal strength
MHF4(IPEX4) to SMA 20cm
MHF4 is already installed on the AX210NGW wifi card
Gold Plated SMA, higher reliability and more stable signal
Packing list:
1xREKONG AX210NGW wifi card
2x6dbi high antennas
2x20cm MHF4 to SMA antennas
1xLow Profile Bracket
1xFull Profile Bracket
1xInstallation Guide
1xScrewdriver
1* Plastic clip
1xScrew
1xCD driver
Phreakwar PC Custom Builds
2025-08-24 13:44:44
Used this in a Dell OptiPlex 3080. Instead of mounting it in one of the PCI slots, I took advantage of the Dell's pre-punched holes in the back and put the antennas there instead. The kept the PCIE 1X slot free for other use. Windows 11 identified both the wi-fi and bluetooth automatically with no drivers needed. It also connected at wi-fi 6 speeds which was awesome. The signal is very strong, it identifies several networks in the neighborhood that don't show up on some of my weaker devices, even from the basement! I like the versatility of this adapter to be able to go from regular to low profile, to even pre drilled case holes. Makes it great for many applications. I'm for sure gonna wish list/bookmark this wifi kit for other projects since I do many new computer builds a year, and several more upgrades for my business.
ob1
2025-08-07 10:00:31
Ordered a small form factor desktop deal from "Doll". Great computer, but to get the wifi card option, I would have spent over $100 in option cost...kinda like when you get a car at a dealer. So, for less than 1/2 the cost, I ordered pretty much the same card, installed in about 10 minutes, drivers loaded and wifi configured in 10. Works as advertised, strong wifi pickup, latest wifi 6E standard, and still money in my pocket. The thing about solid state stuff, it usually either works out of the box, or doesn't. Hold the comments haters! So...quality is excellent (Intel stuff), functionality is excellent (works as it should), value is excellent (way less expensive than "dealer"), longevity not sure yet (it works, but?). I would recommend this as a buy for low cost, easy install, and works without drama!
W. Socha
2025-06-30 11:07:17
This was very easy to install on my ASRock motherboard M.2 slot. The antenna wires were already connected to the card. So a 5 minute install total. Windows immediately detected it and I was able to connect with the WiFi and Bluetooth.
Monte
2025-05-31 10:32:43
Of course trying to connect the little antenna connectors to the card was a total pain in the butt. But, the card works as it should. Mounting the antenna leads to the motherboard back plane holes was a practice in patience, hand-eye coordination, and cursing. But, it works! NO issues so far. Connection is solid and great speed per specs and router ability. I would buy another one if I need it.
Kendra
2025-05-27 10:01:48
The wire comes detached from the physical wifi card so you have to put them on yourself and they kind of have bad clipping connection? They don't snap on and stay on is what I'm trying to say. I have a micro atx motherboard so everything is smaller and more compact and trying to put this is was a PAIN. if you bend the wires a little to far while trying to get it into the case then they will just un click. It was really annoying but I eventually got it.
J. McGaw
2025-05-25 16:12:55
I needed a WiFi / Bluetooth card for a new build and this looked to be a simple way to accomplish it. The Shuttle barebones box had mounting holes for two antennas and I only needed to pop out the break-off plugs so that was no problem. The M.2 fitment was no problem. Actually the most difficult thing was finding a way to route the tiny coax cable from the card to the antennas around the double-wide graphic card in a very very tight case but I finally found a way. The M.2 card uses a bog standard Intel signal unit so drivers were no problem and the performance is flawless. I've done a benchmark but sadly don't recall the actual number and can't be arsed to do it again but the speed was good otherwise I'd have been whinging about it. Makes me happy and I'm hard to please.
Eric R
2025-05-16 13:08:16
I had a RealTek card with two wires connected to sticky pads that didn't work. The Windows Device Manager reported no problems. I bought this kit because it was Intel based and had the complete antennas. After removing the Bluetooth & Wireless drivers, I shutdown the computer and replaced the card. The computer slot was E keyed and the card was E A keyed and I had some concerns. When I booted the computer, the correct drivers were installed and the card worked great. My Bluetooth mouse works and I can now transfer pics from my phone. I'm on a gigabit network and I don't use wireless, but I'd buy this kit again.
Ashton
2025-05-03 10:06:34
Easy to install along with great WiFi speeds for the price! Fit into the M.2 E wifi slot just fine on my AsRock non WiFi motherboard.
Kathirvel Ramasamy
2025-02-25 10:19:36
Works well.
Loke Kwok Leong
2025-01-08 15:11:47
wifi card m.2 is okcable wire came off unable to fix back.I've to buy another pair.
Recommended Products
