Your cart is empty.
Your cart is empty.Product Description
Part number 0J58620157.
Package List:
- 1x carburetor,
- 1x choke level,
- 1x air filter,
- 3x gasket,
- 1x spark plug,
- 1x fuel filter,
- 1x fuel line.
Carburetor Fit Replacement for Generac Model
Please verify this is the right part number before ordering
- Replacement for Generac 5940 GP6500 6500 Running Watts/8000 Starting Watts Gas Powered Portable Generator. Generac 5943
- Replacement for GP7500E 7500 Running Watts/9375 Starting Watts Gas Generator.
- Replacement for Generac 5939 GP5500 5500 Running Watts/6875 Starting Watts Gas Powered Portable Generator.
Carburetor Fit Replacement for Jingke Model
- Replacement for Jingke Huayi Kinzo Ruixing Xieli 5KW 5.5KW 6.5KW 389cc Generators.
- Replacement for Generac GP6500 GP6500E GP7500E GP5000 GP5500 8125W.
- Replacement for Carburetor for Jingke Huayi Kinzo Ruixing 13HP 14HP 15HP 16HP 188F 190F Generator.
Carburetor Detail
Carburetor Front Sides Display
Sides Display of Carburetor
Carburetor Bottom Display
#datbeachesrealtorguy
2025-08-31 19:02:36
My generator wouldn't start. Helena on its way. I replaced carb kit and was prepared when lights went out. Easy to replace using cheap kit. Worked as it should.
Customer
2025-08-27 14:43:28
I used this carb on a portable generator. It was very easy to install and there was no need to make any adjustments or modifications. It worked perfectly right out of the box.
steve reder
2025-08-02 15:59:22
Perfect fit
Eric
2025-08-01 19:17:41
Fit perfect on my Generac GP7500E generator. 4 stars instead of 5 because they didn't ship the gaskets. I had to source them elsewhere. Hit the switch and she fired right up! I only used the carburetor, fuel line & spark plug. The gas filter & air filter seem a little cheap. My generator didn't come with an inline gas filter & it would be very difficult to install because of the length of the fuel line. The air filter is not like the OEM air filter and is just a single piece of foam. Overall very worth the price though and shipping was FAST!
Erika Garcia
2025-07-29 15:26:48
The media could not be loaded.
Darrell
2025-07-28 15:53:20
Fits perfect. Made my generator run like new.
SK_in_CA
2025-07-20 12:39:44
The carburetor started leaking gasoline after brief period of successful usage (but beyond the 30 day return period). The leak was caused by the float valve sticking in the OPEN position so gasoline continued flowing into (and out of) the bowl once the bowl was filled. This was not caused by fuel left in the carburetor because the motor was run dry after use by closing the petcock. It appears that the float valve is poorly designed compared to original equipment and/or poorly manufactured as it does not move smoothly in its brass sleeve. Ridges on the metal sliding valve part that make contact with the brass sleeve have a rough surface.This is the only part of the carburetor design where critical tolerances are needed for the valve to slide smoothly to open and shut in response to the float. Unfortunately PAN300 failed in this case.
Hank Williams
2025-07-15 17:14:37
Took it out of the box and bolted it on and she fired right up.
#datbeachesrealtorguy
2025-06-15 17:06:03
My generator wouldn't start. Helena on its way. I replaced carb kit and was prepared when lights went out. Easy to replace using cheap kit. Worked as it should.
Customer
2025-06-13 09:49:03
I used this carb on a portable generator. It was very easy to install and there was no need to make any adjustments or modifications. It worked perfectly right out of the box.
steve reder
2025-04-20 18:06:02
Perfect fit
Eric
2025-04-19 18:25:17
Fit perfect on my Generac GP7500E generator. 4 stars instead of 5 because they didn't ship the gaskets. I had to source them elsewhere. Hit the switch and she fired right up! I only used the carburetor, fuel line & spark plug. The gas filter & air filter seem a little cheap. My generator didn't come with an inline gas filter & it would be very difficult to install because of the length of the fuel line. The air filter is not like the OEM air filter and is just a single piece of foam. Overall very worth the price though and shipping was FAST!
Erika Garcia
2025-04-14 14:26:54
The media could not be loaded.
Darrell
2025-03-14 14:53:07
Fits perfect. Made my generator run like new.
SK_in_CA
2025-02-18 10:58:26
The carburetor started leaking gasoline after brief period of successful usage (but beyond the 30 day return period). The leak was caused by the float valve sticking in the OPEN position so gasoline continued flowing into (and out of) the bowl once the bowl was filled. This was not caused by fuel left in the carburetor because the motor was run dry after use by closing the petcock. It appears that the float valve is poorly designed compared to original equipment and/or poorly manufactured as it does not move smoothly in its brass sleeve. Ridges on the metal sliding valve part that make contact with the brass sleeve have a rough surface.This is the only part of the carburetor design where critical tolerances are needed for the valve to slide smoothly to open and shut in response to the float. Unfortunately PAN300 failed in this case.
Hank Williams
2024-12-25 11:48:47
Took it out of the box and bolted it on and she fired right up.
Recommended Products