Your cart is empty.
Your cart is empty.Product Description
BAOSHISHAN Zahn Cup - Unlock More Unknown Liquid Viscosity
This is a Zahn Type Cup Viscometer which are used to measure the flow behavior of liquids such as paints and is in very nice condition. Applicable to the construction site to quickly measure the viscosity of the paint to be sprayed; more widely used in electronic products, plastic coatings industry.
- Fast determination of fluid viscosity such as ink, paint and dye.
- Cup 1# ~ 5 # available for different materials
- Mainly applied to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect.
Clear Nameplate
Laser marking of nameplates of various models is convenient for different use.
Outflow Hole
Precision drilling can ensure the accuracy of outflow, is not easy to grind.
Balance Ring Buckle
Ensure that the cup body remains vertical during use, easy to operate, fast and accurate measurement.
Zahn Cup Operation Method & Maintenance
1. Clean before Testing
Choose the appropriate cup size before testing, so that the time of outflow can be controlled between 20 and 80 seconds. Wipe it clean with the appropriate solvent and dry it before using.
2. Liquid Temperature Control
Adjust the temperature of the filtered sample and the outlet cup to 25℃ or a specific temperature, keep the temperature constant, and immerse the cup in the container for 1-5 minutes to achieve a thermal balance.
3. Test and Time
Lift the cup vertically from the sample, and the movement needs to be fast and steady. Start the timer when the the upper end of the cup leaves the liquid level and. Keep the cup vertical when the liquid flows out and the distance from the liquid surface should not exceed 150mm.
4. Viscosity Value Conversion
Stop timing when the first breakpoint occurs. Repeat the test 2-3 times. Take the average time to reduce the error and the difference between the two measurements should be less than 5% of the average. Then use the formula v=k (t-c) to convert the viscosity value. Clean the cup after testing.
Application
Zahn Cup can be used to quickly determine the viscosity of printing ink, dyes, coatings, experimental solvents, leather paint, oil, grease, food and other mobile liquids in the printing industry such as paint, varnish, wet enamel, gravure, relief, lithography, flexography, silk plate, etc.
Zahn Cup is often used as a fast viscosity measuring tool in workshops and at the spot.
Douglas E. Koschnitzke
2025-08-31 15:25:47
just was too small for me would buy again
JSL
2025-08-20 19:32:17
It must be accurate because I’ve used a few times and the paint turned out good.
Bazooka Joe
2025-06-20 17:33:08
Promptly shipped, well packed and works as exxpected.
Mark E. Easterday
2025-05-16 10:34:40
Very useful measuring device for my industry. Shipping was fast.
shopper1
2025-04-22 10:20:13
The cup is well built with smooth edges on the sides for easy cleaning. The little round ring at the top is a nice feature in that it allows you to easily hold the cup by the ring so it stays level.
csanchezm68
2025-04-01 13:10:34
excelente!!
Johnny M
2025-03-30 18:01:41
seller described item accuratelyproduct arrived well packaged for protection
Jeffrey
2025-03-23 11:17:56
Works and is nicely made
Franco, Jose
2025-03-16 15:35:29
Bom produto
JMcD
2025-02-25 10:28:08
Product was well packaged.
Ian Chapman
2025-02-17 10:35:21
Bad quality. Used it, works fine, go to clean it - the cup comes off the handle extremely easily and can’t be reattached. It shouldn’t have broken that easily.
Recommended Products
$181.98
$ 73 .99 $73.99
$139.00
$ 68 .99 $68.99
$122.00
$ 55 .99 $55.99