Your cart is empty.
Your cart is empty.BBK Performance Power-Plus Series cold air intake kits offer the best way to step up the performance on any late model EFI performance car or truck. These performance cold air intake systems are designed to increase the power on your vehicle by as much as 10% and they are all will increase throttle response, acceleration and overall performance on all applications. Each and Every BBK Performance Cold Air Intake Kit replaces the ugly and restrictive factory stock assembly with an unrestrictive intake tube that is designed to straighten out and provide maximum airflow to the engine via one of our BBK high flow washable cotton element filters. This all translates to a better sounding vehicle with more horsepower and torque at the rear wheels every day without sacrificing gas mileage. BBK Performance offer a variety of cold air intake kits that utilize a custom designed CNC mandrel bent polished chrome or blackout finish intake tube or lightweight powder-coated aluminum inlet casting that deliver unmatched quality and custom fit for a variety of auto and truck applications. Most BBK Performance Cold Air Intake kits have passed emissions testing and are 50 State SMOG legal for use on the street – Please check the product features above for more information: Every BBK Performance cold air kit is dyno tested to achieve maximum performance for every application and they look as good as they perform under the hood. A BBK Performance manufacturer’s warranty is included with every kit. About BBK Performance: BBK Performance has designed and manufactured high quality performance parts in the USA for over 25 years and they are today’s leader in aftermarket EFI performance parts that exceed OEM for American cars and trucks. Without exception all BBK Performance parts are direct bolt on with no modifications. Why follow when you can lead? That is the goal at BBK Performance – To lead the aftermarket parts industry with innovation, quality and value and continue to be the number one manufacturer of EFI performance parts and accessories for today’s high performance American cars and trucks.
JB2112
2025-08-07 09:48:15
Bought this for my 1997 Mustang GT as my first mod and it blew me away. It sounds a lot better than the stock intake did, and the performance boost was also substantial. I was able to install it myself in about an hour and a half but I'm sure it could be done faster considering I don't have much experience with doing things like this myself aside from a few smaller things I've done. I don't think I could be any happier with the product. I did have some problems with Idling irregularly in the very beginning but once the car got used to the increased airflow (which took no longer than about 20 minutes max) it idled perfectly and I have yet to have a single issue. The only thing that was difficult for me was getting the filters on because it was difficult to reach under the car to do it, but still it only took me about 10 minutes of laying on the ground to finally get it to connect and clamp it down. All in all this is a great product and is easy to install and isn't too hard on the wallet either.
steve hadley
2025-07-30 10:38:05
installed pretty easy . used a grinder to make the hole in the fender a little bigger so the new air cleaner would go through. seemed to make my mustang gt run a little stronger.
luke s
2025-07-28 17:25:50
This was actually really difficult to install. Where the pipe curves into the fender, it does not angle down towards the pavement. So the filter sits against the inside portion of the fender. It should have a curved 2 way pipe.....
Sean g
2025-07-23 10:35:22
5 stars for me as they contact you and make sure you are in communication in the process if needed. Looks beautiful and would recommend this company for all my horsepower needs with this one!
Jim
2025-06-12 14:52:41
Easy install and looks good
Scott H.
2025-06-05 18:16:59
Very straight foreword install, took me 45 min.
Gary Lockhart
2025-03-17 12:28:09
This is an awesome addition to my vehicle's performance. fast shipping.
bignate
2025-02-22 16:46:13
The picture shows an oval filter. I received a round filter. the filter is too big to fit through the hole in the fender so you have to attach the filter from under the car and inside the fenderwell. if you look inside your fenderwell before purchasing, you can see that there really isnt much room for anything right there.the seam where the fender attaches to the car rubs really hard on the filter after installation. i put several layers of heavy duty duct tape on the seam to protect my filter but i feel i will have to replace my filter down the road because of vibrations.If i were to do it again, i would buy a CAI that keeps the filter inside the hood area and has a heat shield.on a positive note. it is shiny and looks nice. It's just a pain to install and I fear how long the filter will last.
Kurt a.
2025-02-08 09:04:19
Â
Marco Gervasio
2025-02-06 16:37:33
Easy to install, did it together with my son, (better with two people) and it improved performance and sound. Looks great under the hood. I would buy this again
brandon
2025-01-22 12:04:03
I am missing bolts for it
Terry
2024-12-17 16:02:29
Very impressed exactly what they said and prime had it in my hand the next day
Ryan Mantha
2024-12-14 20:59:25
Nice outside finish, the inside of the tubing was all rusty when I received it? Thought it was supposed to be stainless steel?
Recommended Products
$99.99
$ 42 .99 $42.99